Young-Cheol Chang

Isolation of Bacillus sp. strains capable of decomposing alkali lignin and their application in combination with lactic acid bacteria for enhancing cellulase performance

Effective biological pretreatment method for enhancing cellulase performance was investigated. Two alkali lignin-degrading bacteria were isolated from forest soils in Japan and named CS-1 and CS-2. 16S rDNA sequence analysis indicated that CS-1 and CS-2 were Bacillus sp. Strains CS-1 and CS-2 displayed alkali lignin degradation capability. With initial concentrations of 0.05-2.0 g L(-1), at least 61% alkali lignin could be degraded within 48 h. High laccase activities were observed in crude enzyme extracts from the isolated strains. This result indicated that alkali lignin degradation was correlated with laccase activities. Judging from the net yields of sugars after enzymatic hydrolysis, the most effective pretreatment method for enhancing cellulase performance was a two-step processing procedure (pretreatment using Bacillus sp. CS-1 followed by lactic acid bacteria) at 68.6%. These results suggest that the two-step pretreatment procedure is effective at accelerating cellulase performance.

In vitro dehalogenation of tetrachloroethylene (PCE) by cell-free extracts of Clostridium bifermentans DPH-1

Cell-free extracts of Clostridium bifermentans DPH-1 catalyzed tetrachloroethylene (PCE) dechlorination. PCE degradation was stimulated by addition of a variety of electron donors. Ethanol (0.61 mM) was the most effective electron donor for PCE dechlorination. Maximum activity was recorded at 30 degrees C and pH 7.5. Addition of NADH as a cofactor stimulated enzymatic activity but the activity was not stimulated by addition of metal ions. When the cell-free enzyme extract was incubated in the presence of titanium citrate as a reducing agent, the dehalogenase was rapidly inactivated by propyl iodide (0.5 mM). The activity of propyliodide-reacted enzyme was restored by illumination with a 250 W lamp. The dehalogenase activity was also inhibited by cyanide. The substrate spectrum of activity included trichloroethylene (TCE), cis-1,2-dichloroethylene (cDCE), trans-dichloroethylene, 1,1-dichloroethylene, 1,2-dichloroethane, and 1,1,2-trichloroethane. The highest rate of degradation of the chlorinated aliphatic compounds was achieved with PCE, and PCE was principally degraded via TCE to cDCE. Results indicate that the dehalogenase could play a vital role in the breakdown of PCE as well as a variety of other chlorinated aliphatic compounds.

Enrichment of bacteria possessing catechol dioxygenase genes in the rhizosphere of Spirodela polyrrhiza: a mechanism of accelerated biodegradation of phenol.

The bacterial community structure in bulk water and in rhizosphere fractions of giant duckweed, Spirodela polyrrhiza, was quantitatively and qualitatively investigated by PCR-based methods using 6 environmental water samples to elucidate the mechanisms underlying selective accumulation of aromatic compound-degrading bacteria in the rhizosphere of S. polyrrhiza. S. polyrrhiza selectively accumulated a diverse range of aromatic compound-degrading bacteria in its rhizosphere, regardless of the origin of water samples, despite no exposure to phenol. The relative abundances of the catechol 1,2-dioxygenase (C12O) gene (C12O DNA) and catechol 2,3-dioxygenase (C23O) gene (C23O DNA) were calculated as the ratios of the copy numbers of these genes to the copy number of 16S rDNA and are referred to as the rhizosphere effect (RE) value. The RE values for C12O DNA and C23O DNA were 1.0 x 10(1)-9.3 x 10(3) and 1.7 x 10(2)-1.5 x 10(4) times as high, respectively, in rhizosphere fractions as in bulk water fractions, and these higher values were associated with a notably higher sequence diversity of C12O DNA and C23O DNA. The RE values during phenol degradation were 3.6 x 10(0)-4.3 x 10(2) and 2.2 x 10(0)-1.7 x 10(2), respectively, indicating the ability of S. polyrrhiza to selectively accumulate aromatic compound-degrading bacteria in its rhizosphere during phenol degradation. The bacterial communities in the rhizosphere fractions differed from those in the bulk water fractions, and those in the bulk water fractions were notably affected by the rhizosphere bacterial communities. S. polyrrhiza released more than 100 types of phenolic compound into its rhizosphere as root exudates at the considerably high specific release rate of 1520mg TOC and 214mg phenolic compounds/d/g root (wet weight). This ability of S. polyrrhiza might result in the selective recruitment and accumulation of a diverse range of bacteria harboring genes encoding C12O and C23O, and the subsequent accelerated degradation of phenol in the rhizosphere.

Poly-3-hydroxybutyrate (PHB) production from alkylphenols, mono and poly-aromatic hydrocarbons using Bacillus sp. CYR1: A new strategy for wealth from waste

In the present study five different types of alkylphenols, each of the two different types of mono and poly-aromatic hydrocarbons were selected for degradation, and conversion into poly-3-hydroxybutyrate (PHB) using the Bacillus sp. CYR1. Strain CYR1 showed growth with various toxic organic compounds. Degradation pattern of all the organic compounds at 100 mg/l concentration with or without addition of tween-80 were analyzed using high pressure liquid chromatography (HPLC). Strain CYR1 showed good removal of compounds in the presence of tween-80 within 3 days, but it took 6 days without addition of tween-80. Strain CYR1 showed highest PHB production with phenol (51 ± 5%), naphthalene (42 ± 4%), 4-chlorophenol (32 ± 3%) and 4-nonylphenol (29 ± 3%). The functional groups, structure, and thermal properties of the produced PHB were analyzed. These results denoted that the strain Bacillus sp. CYR1 can be used for conversion of different toxic compounds persistent in wastewaters into useable biological polyesters.

Enhanced extraction of heavy metals in the two-step process with the mixed culture of Lactobacillus bulgaricus and Streptococcus thermophilus

For biological extraction of heavy metals from chromated copper arsenate (CCA) treated wood, different bacteria were investigated. The extraction rates of heavy metals using Lactobacillusbulgaricus and Streptococcusthermophilus were highest. The chemical extraction rates were depended on the amounts of pyruvic acid and lactic acid. Especially, the extraction rates using mixed pyruvic acid and lactic acid were increased compared to those of sole one. They were also enhanced in the mixed culture of L. bulgaricus and S. thermophilus. To improve the extraction of CCA, a two-step processing procedure with the mixed culture of L. bulgaricus and S. thermophilus was conducted. A maximum of 93% of copper, 86.5% of chromium, and 97.8% of arsenic were extracted after 4 days. These results suggest that a two-step process with the mixed culture of L. bulgaricus and S. thermophilus is most effective to extract heavy metals from CCA treated wood.

Production of poly-3-hydroxybutyrate (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) from synthetic wastewater using Hydrogenophaga palleronii

In the present study, synthetic wastewater (SW) was used for production of poly-3-hydroxybutyrate (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) using the bacteria Hydrogenophaga palleronii. SW at various volatile fatty acids concentrations (5-60g/l) was evaluated for the growth and biopolymer production using H. palleronii. Substrate degradation was analyzed using total organic carbon (TOC) analyzer and high pressure liquid chromatography (HPLC). H. palleronii showed highest and lowest removal of TOC at 5g/l (88±4%) and 60g/l (15±6%) respectively. Among all the concentrations evaluated, bacteria showed highest biopolymer production with 20g/l (63±5%), followed by 30g/l (58±3%) and 40g/l (56±2%). Lowest biopolymer production was observed at 5g/l concentration (21±3%). Structure, molecular weight, and thermal properties of the produced biopolymer were analyzed. These results denoted that the strain H. palleronii can be used for degradation of high concentration of volatile fatty acids persistent in wastewaters and their subsequent conversion into useable biopolymers.

Bio-Augmentation of Cupriavidus sp. CY-1 into 2,4-D Contaminated Soil: Microbial Community Analysis by Culture Dependent and Independent Techniques

In the present study, a 2,4-dichlorophenoxyacetic acid (2,4-D) degrading bacterial strain CY-1 was isolated from the forest soil. Based on physiological, biochemical and 16S rRNA gene sequence analysis it was identified as Cupriavidus sp. CY-1. Further 2,4-D degradation experiments at different concentrations (200 to 800 mg l-1) were carried out using CY-1. Effect of NaCl and KNO3 on 2,4-D degradation was also evaluated. Degradation of 2,4-D and the metabolites produced during degradation process were analyzed using high pressure liquid chromatography (HPLC) and GC-MS respectively. The amount of chloride ions produced during the 2,4-D degradation were analyzed by Ion chromatography (IC) and it is stoichiometric with 2,4-D dechlorination. Furthermore two different types of soils collected from two different sources were used for 2,4-D degradation studies. The isolated strain CY-1 was bio-augmented into 2,4-D contaminated soils to analyze its degradation ability. Culture independent methods like denaturing gradient gel electrophoresis (DGGE) and terminal restriction fragment length polymorphism (T-RFLP), and culture dependent methods like colony forming units (CFU) and most probable number (MPN) were used to analyze the survivability of strain CY-1 in contaminated soil. Results of T-RFLP were coincident with the DGGE analysis. From the DGGE, T-RFLP, MPN and HPLC results it was concluded that strain CY-1 effectively degraded 2,4-D without disturbing the ecosystem of soil indigenous microorganisms.

Characterization, stability, and antioxidant activity of Salicornia herbaciea seed oil

We investigated the physicochemical properties, chemical composition, stability and antioxidant activity from seed oil of Salicornia herbaciea grown in Korea. The density, refractive index, acid value, peroxide value, iodine value, saponification value, and unsaponifiable matter of oil were 0.91mg/mL, 1.48 at 20 °C, 1.89mg KOH/g oil, 10.20 mEq/kg oil, 1.08 g I/g oil, 216.21 mg KOH/g oil, and 2.60%, respectively. The major fatty acids were linoleic acid (43.73%), oleic acid (19.81%), arachidic acid (13.52%), and palmitic acid (11.84%), respectively. The oil contained high levels of α-tocopherol (249.2 mg/kg oil), followed by δ-tocopherol (89.3 mg/kg), and γ-tocopherol (75.6 mg/kg oil). The oil was found to have high levels of β-sitosterol (94.5mg/kg oil) and stigmasterol (65.7mg/kg oil), respectively. The total phenol, chlorophyll and β-carotene content of oil was 15.2, 94.5, and 8.2 mg/kg oil, respectively. The oil had good oxidative stability during 60 days of storage in a dark area at 50 °C. The maximum degradation rates of the oil were observed at 242.3 °C (9.5%/min), 382.6 °C (5.2%/min), and 440.7 °C (1.3%/min), respectively, where the rate of the weight decrease increased to a maximum up to this point. The ABTS radical scavenging activity of the oil was increased from 50.2 to 71.8% when the oil concentration extracted by methanol was increased from 100 to 300 μg/mL. This study suggests that S. herbaciea seed oil has potential use in functional foods, cosmetics or pharmaceuticals.

Comparative study on the antioxidant and nitrite scavenging activity of fruiting body and mycelium extract from Pleurotus ferulae

We investigated the effects of the antioxidant and the nitrite scavenging activities of the extracts from Pleurotus ferulae fruiting body grown on the solid state using corn cob and activated bleaching earth (CCABE media) and its mycelium grown in the liquid state. The total phenol and polysaccharide concentrations in hot water extract of fruiting body were approximately 3.6- and 4.3-fold higher than those of the mycelium. Using the hot water extract of fruiting body, the maximum DPPH radical scavenging activity at 9 mg/mL, hydroxyl radical scavenging activity at 12mg/mL, reducing power at 12 mg/mL, and chelating ability at 12 mg/mL were obtained, 80.5%, 72.4%, 0.99 OD (700 nm), and 77.0%, respectively. However, in the case of hydrogen peroxide scavenging activity, the ethanol extract was the highest, 78.7% at 12 mg/mL. The maximum nitrite scavenging activity was obtained, 89.7% at 6 mg/mL of hot water extract from fruiting body. Hot water extracts were more effective than ethanol extracts in scavenging activity on DPPH radicals and hydroxyl radical scavenging, reducing power, and chelating activity of ferrous, whereas ethanol extracts were more effective in hydrogen peroxide scavenging activity as evidenced by their lower EC50 values. These results indicate that the hot water extract of P. ferulae fruiting body using CCABE media has good potential to be used as a source of materials or additives for oxidation suppressant in food, cosmetics and drug compositions.

Polyhydroxyalkanoates (PHA) production from synthetic waste using Pseudomonas pseudoflava: PHA synthase enzyme activity analysis from P. pseudoflava and P. palleronii

Synthetic wastewater (SW) at various carbon concentrations (5-60g/l) were evaluated for polyhydroxyalkanoates (PHA) production using the bacteria Pseudomonas pseudoflava. Bacteria showed highest PHA production with 20g/l (57±5%), and highest carbon removal at 5g/l (74±6%) concentrations respectively. Structure, molecular weight, and thermal properties of the produced PHA were evaluated using various analytical techniques. Bacteria produced homo-polymer [poly-3-hydroxybutyrate (P3HB)] when only acetate was used as carbon source; and it produced co-polymer [poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV)] by addition of co-substrate propionate. PHA synthase, the enzyme which produce PHA was extracted from two bacterial strains i.e., P. pseudoflava and P. palleronii and its molecular weight was analysed using SDS-PAGE. Protein concentration, and PHA synthase enzyme activity of P. pseudoflava and P. palleronii was carried out using spectrophotometer. Results denoted that P. pseudoflava can be used for degradation of organic carbon persistent in wastewaters and their subsequent conversion into PHA.