Young-Hyuk Kwon

Anatomical structures in the maxillary sinus related to lateral sinus elevation: a cone beam computed tomographic analysis

OBJECTIVES The objective of this study is to evaluate the anatomical structures in the maxillary sinus with relation to lateral approach sinus elevation utilizing cone beam computed tomography (CT) scans taken prior to sinus elevation surgery. MATERIALS AND METHODS A total of 150 CT images were acquired from 150 patients (90 men and 60 women; mean age, 49.4 years, range 23-86 years) who were being treated with implant-supported restorations in the posterior edentulous maxilla. Of the 150 CT scans, 65 were of the right sinus and 85 of the left sinus. Measurements of the anatomical structures in the maxillary sinus were conducted on the CT images. RESULTS In the mean width of the lateral wall, there were statistically significant values among the measurement points (P < 0.05). The anterior area of the sinus lateral wall was thicker than the posterior lateral wall. There was a statistically significant difference between the vessel diameter and lateral wall width (P < 0.05). As sinus lateral wall width increased, so did the vessel diameter. The mean distance to the inferior border of the vessel from the sinus floor and from the alveolar crest was 8.25 and 17.03 mm, respectively. The intraosseous group among the vessel position was 64.3%, so the intraosseous vessel could be visualized in CT scans at 64.3%. In angle A, the group of less than 30° was 4.8%. Schneiderian membrane perforation by narrow angle had a low risk. The prevalence of the septa related to Schneiderian membrane perforation was 44%. The distance to the inferior border of the vessel from the alveolar crest being less than 15 mm was 31%. The vessel diameter greater than 1 mm was 37.8%. CONCLUSIONS Based on present research about utilizing cone beam CT scans for sinus elevation, the alteration of the lateral approach sinus elevation technique is highly recommended if complications such as membrane perforation or bleeding are expected.

The effects of bone grafting material and a collagen membrane in the ridge splitting technique: an experimental study in dogs

OBJECTIVES This study was designed to evaluate the effect of bone graft materials and collagen membranes in ridge splitting procedures with immediate implant placement using a dog model. MATERIALS AND METHODS Mandibular premolars were extracted in five beagle dogs. After 3 months, ridge splitting and placement of three OsseoSpeed implants were performed bilaterally. The gaps between the implants were allocated according to the following eight treatment modalities; Group 1(no graft), Group 2 (autogenous bone), Group 3 (Bio-Oss Collagen), Group 4 (Bio-Oss), Group 5 (no graft+BioGide), Group 6 (autogenous bone+BioGide), Group 7 (Bio-Oss Collagen+BioGide), and Group 8 (Bio-Oss +BioGide). The dogs were sacrificed after 8 or 12 weeks and the specimens were analyzed histologically and histometrically. RESULTS The gaps between the implants were filled with the newly formed bone, irrespective of which of the eight grafting techniques was used. Group 1 revealed a significantly lower percentage of bone-to-implant contact (BIC) than Group 5 at 8 and 12 weeks (P<0.05). Group 1 showed the most prominent marginal bone loss (MBL) at 12 weeks (P<0.05). Regarding the use of membranes, Groups 1 and 2 showed significantly more MBL than Groups 5 and 6 at 12 weeks (P<0.05). CONCLUSIONS After ridge splitting, if the gaps between implants were grafted or covered with collagen membranes, a higher percentage of BIC was obtained. Based on our results, we suggest that the use of bone graft materials and/or collagen membranes is better for the prevention of MBL after ridge splitting procedures.

The effect of erbium-doped: yttrium, aluminium and garnet laser irradiation on the surface microstructure and roughness of double acid-etched implants

Purpose One of the most frequent complications related to dental implants is peri-implantitis, and the characteristics of implant surfaces are closely related to the progression and resolution of inflammation. Therefore, a technical modality that can effectively detoxify the implant surface without modification to the surface is needed. The purpose of this study was to evaluate the effect of erbium-doped: yttrium, aluminium and garnet (Er:YAG) laser irradiation on the microstructural changes in double acid-etched implant surfaces according to the laser energy and the application duration. Methods The implant surface was irradiated using an Er:YAG laser with different application energy levels (100 mJ/pulse, 140 mJ/pulse, and 180 mJ/pulse) and time periods (1 minute, 1.5 minutes, and 2 minutes). We then examined the change in surface roughness value and microstructure. Results In a scanning electron microscopy evaluation, the double acid-etched implant surface was not altered by Er:YAG laser irradiation under the condition of 100 mJ/pulse at 10 Hz for any of the irradiation times. However, we investigated the reduced sharpness of the specific ridge microstructure that resulted under the 140 mJ/pulse and 180 mJ/pulse conditions. The reduction in sharpness became more severe as laser energy and application duration increased. In the roughness measurement, the double acid-etched implants showed a low roughness value on the valley area before the laser irradiation. Under all experimental conditions, Er:YAG laser irradiation led to a minor decrease in surface roughness, which was not statistically significant. Conclusions The recommended application settings for Er:YAG laser irradiation on double acid-etched implant surface is less than a 100 mJ/pulse at 10 Hz, and for less than two minutes in order to detoxify the implant surface without causing surface modification.

A comparison of different gingival depigmentation techniques: ablation by erbium:yttrium-aluminum-garnet laser and abrasion by rotary instruments

Purpose The aim of this study is to compare two different gingival depigmentation techniques using an erbium:yttrium-aluminum-garnet (Er:YAG) laser and rotary instruments. Methods Two patients with melanin pigmentation of gingiva were treated with different gingival depigmentation techniques. Ablation of the gingiva by Er:YAG laser was performed on the right side, and abrasion with a rotary round bur on the opposite side. Results The patients were satisfied with the esthetically significant improvement with each method. However, some pigment still remained on the marginal gingival and papilla. The visual analog scale did not yield much difference between the two methods, with slightly more pain on the Er:YAG laser treated site. Conclusions The results of these cases suggest that ablation of the gingiva by an Er:YAG laser and abrasion with a rotary round bur is good enough to achieve esthetic satisfaction and fair wound healing without infection or severe pain. Prudent care about the gingival condition, such as the gingival thickness and degree of pigmentation along with appropriate assessment is needed in ablation by the Er:YAG laser procedure.

Implant failure associated with oral bisphosphonate-related osteonecrosis of the jaw

Purpose The aim of this study is to report a case of oral bisphosphonate-related osteonecrosis of the jaw (BRONJ) resulting in implant failure. Methods A patient suspected of having BRONJ was referred to the Department of Periodontology, Kyung Hee University School of Dentistry for the evaluation and treatment of exposed bone around implants. Results The patient, who had been taking oral bisphosphonates (BPs) for about a year, was successfully treated with systemic antibiotics, chlorhexidine mouth rinse, explantation, and surgical debridement of necrotic bone. Conclusions The results of this case suggest that a patient taking BPs orally should be treated cautiously. Appropriate management including cessation of BPs and respective dental treatment may reduce the development of BRONJ.

Effect of erbium-doped: yttrium, aluminium and garnet laser irradiation on the surface microstructure and roughness of sand-blasted, large grit, acid-etched implants

Purpose The present study was performed to evaluate the effect of erbium-doped: yttrium, aluminium and garnet (Er:YAG) laser irradiation on sand-blasted, large grit, acid-etched (SLA) implant surface microstructure according to varying energy levels and application times of the laser. Methods The implant surface was irradiated by the Er:YAG laser under combined conditions of 100, 140, or 180 mJ/pulse and an application time of 1 minute, 1.5 minutes, or 2 minutes. Scanning electron microscopy (SEM) was used to examine the surface roughness of the specimens. Results All experimental conditions of Er:YAG laser irradiation, except the power setting of 100 mJ/pulse for 1 minute and 1.5 minutes, led to an alteration in the implant surface. SEM evaluation showed a decrease in the surface roughness of the implants. However, the difference was not statistically significant. Alterations of implant surfaces included meltdown and flattening. More extensive alterations were present with increasing laser energy and application time. Conclusions To ensure no damage to their surfaces, it is recommended that SLA implants be irradiated with an Er:YAG laser below 100 mJ/pulse and 1.5 minutes for detoxifying the implant surfaces.

I-shaped incisions for papilla reconstruction in second stage implant surgery

Purpose Pink gingival esthetic especially on the anterior teeth has been an important success criterion in implant-supported restoration. Inter-implant papillae are a critical factor for implant esthetics, and various techniques for inter-implant papilla reconstruction have been introduced. The aim of this study is to suggest and evaluate a surgical technique for reconstructing inter-implant papillae. Methods A 28-year-old man had an implant placed on the #13 and #14 area. Four months after implant placement, a second stage surgery was planned for inter-implant papilla reconstruction. At the time of the abutment connection, I-type incisions were performed on the #13i & #14i area followed by full-thickness flap elevation and connection of a healing abutment on underlying fixtures without suture. Results Two weeks after the second stage implant surgery, soft tissue augmentation between the two implants was achieved. Conclusions I-shaped incisions for papilla reconstruction performed during the second stage implant surgery were useful for inter-implant papilla reconstruction and showed a good esthetic result.

Tissue reactions to suture materials in the oral mucosa of beagle dogs

Purpose The objective of this study was to compare and evaluate the inflammatory responses of three widely used suture materials in the keratinized gingiva and buccal mucosa of beagle dogs. Methods Silk, polyglycolic acid, and nylon sutures were placed within the mandibular keratinized gingiva and maxillary buccal mucosa of four male beagle dogs. Biopsies were taken 3, 7, and 14 days after suturing. Specimens were prepared with hematoxylin-eosin stain for evaluation under a light microscope. Results The suture materials placed in the oral mucosa elicited more inflammatory reactions than did those placed in the keratinized gingiva. The multifilament suture materials caused more inflammatory tissue reactions than did the monofilament suture materials in the oral mucosa. Conclusions If oral hygiene is well maintained and suture materials are placed in the keratinized gingiva, silk, nylon, and polyglycolic acid are considered to be proper suture materials for oral surgery. However, it is advisable to use monofilament suture materials if the suture site is within the oral mucosa.

The effect of Er:YAG laser irradiation on the surface microstructure and roughness of hydroxyapatite-coated implant

Purpose The present study was performed to evaluate the effect of erbium:yttrium-aluminium-garnet (Er:YAG) laser irradiation on the change of hydroxyapatite (HA)-coated implant surface microstructure according to the laser energy and the application time. Methods The implant surface was irradiated by Er:YAG laser under combination condition using the laser energy of 100 mJ/pulse, 140 mJ/pulse and 180 mJ/pulse and application time of 1 minute, 1.5 minutes and 2 minutes. The specimens were examined by surface roughness evaluation and scanning electron microscopic observation. Results In scanning electron microscope, HA-coated implant surface was not altered by Er:YAG laser irradiation under experimental condition on 100 mJ/pulse, 1 minute. Local areas with surface melting and cracks were founded on 100 mJ/pulse, 1.5 minutes and 2 minutes. One hundred forty mJ/pulse and 180 mJ/pulse group had surface melting and peeling area of HA particles, which condition was more severe depending on the increase of application time. Under all experimental condition, the difference of surface roughness value on implant surface was not statistically significant. Conclusions Er:YAG laser on HA-coated implant surface is recommended to be irradiated below 100 mJ/pulse, 1 minute for detoxification of implant surface without surface alteration.

Epithelial Thickness of the Palatal Mucosa: A Histomorphometric Study in Koreans

Subepithelial connective tissue grafting (SCTG) is a frequently used method in the field of periodontal plastic surgery. There are relatively few reports defining epithelial thickness criteria for palatal mucosal SCTG. The aim of this study was to histologically measure the epithelial thickness of the palatal mucosa in a sample of Korean patients, with the goal of minimizing epithelium‐associated complications after root coverage procedures. A total of 30 Korean patients (12 males and 18 females) were enrolled in this study. To measure epithelial thicknesses, palatal mucosa adjacent to premolars and molars was obtained during procurement of SCTG. The effects of donor site, age and gender on the thickness of the epithelium were assessed and compared by histomorphometric analysis. The mean epithelial thickness of the palatal mucosa in our 30 patients was 430.63 μm, ranging from 113 to 823 μm. Epithelial thickness was not associated with donor site or age, but there were significant differences between genders, with males having much thicker palates than females. Anat Rec, 2010.