Youssef Zeroual

Waste water bacterial isolates resistant to heavy metals and antibiotics.

Sewage water of Casablanca, an industrial city in Morocco, was studied for microorganisms resistant to heavy metals. Isolates were purified and collected on agar slants to be screened for resistance to heavy metals, including mercury in vitro. The strains that showed high resistance to heavy metals were also studied for their resistance to antibiotics and aromatic hydrocarbons. Results indicated that the strains most resistant to all tested products belonged to Ps. fluorescens, Ps. aeruginosa, Klebsiella pneumoniae, Proteus mirabilis, and Staphylococcus sp. These strains exhibit high minimal inhibitory concentrations for heavy metals such as cadmium (2 mm) or mercury (1.2 mm). Growth of Ps. fluorescens and Klebsiella pneumoniae in the presence of heavy metals was also determined, and the growth curves indicated that mercury, copper, and zinc present a slight inhibitory action, while cadmium and silver could have a potent inhibitory action on growth compared with the controls. These studies also investigated growth in media containing aromatic compounds as the sole source of carbon. The results demonstrate that these strains could be good candidates for remediation of some heavy metals and aromatic compounds in heavily polluted sites.

Purification and partial characterization of azoreductase from Enterobacter agglomerans.

Azoreductase, an enzyme catalyzing the reductive cleavage of the azo bond of methyl red (MR) and related dyes, was purified to electrophoretic homogeneity from Enterobacter agglomerans. This bacterial strain, isolated from dye-contaminated sludge, has a higher ability to grow, under aerobic conditions, on culture medium containing 100mg/L of MR. The enzyme was purified approximately 90-fold with 20% yield by ammonium sulfate precipitation, followed by three steps of column chromatography (gel-filtration, anion-exchange, and dye-affinity). The purified enzyme is a monomer with a molecular weight of 28,000 Da. The maximal azoreductase activity was observed at pH 7.0 and at 35 degrees C. This activity was NADH dependent. The K(m) values for both NADH and MR were 58.9 and 29.4 microM, respectively. The maximal velocity (V(max)) was 9.2 micromol of NADH min(-1)mg(-1). The purified enzyme is inhibited by several metal ions including Fe(2+) and Cd(2+).

Biosorption of mercury from aqueous solution by Ulva lactuca biomass

The mercury biosorption onto non-living protonated biomass of Ulva lactuca, as an alternative method for mercury removal from aqueous solutions, was investigated. Batch equilibrium tests showed that at pH 3.5, 5.5 and 7 the maxima of mercury uptake values, according to Langmuir adsorption isotherm, were 27.24, 84.74 and 149.25 mg/g, respectively. The ability of Ulva lactuca biomass to adsorb mercury in fixed-bed column, was investigated as well. The influence of column bed height, flow rate and effluent initial concentration of metal was studied. The adsorbed metal ions were easily desorbed from the algal biomass with 0.3 N H(2)SO(4) solution. After acid desorption and regeneration with distilled water, the biomass could be reused for other biosorption assays with similar performances.

Decolorization of azo dyes with Enterobacter agglomerans immobilized in different supports by using fluidized bed bioreactor

Immobilized cells of Enterobacter agglomerans, able to reduce azo dyes enzymatically, were used as a biocatalyst for the decolorization of synthetic medium containing the toxic azo dye methyl red (MR). This bacterial strain exhibits high ability to completely decolorize 100 mg/L of MR after only 6 h of incubation under aerobic conditions. Cells of E. agglomerans were immobilized in calcium alginate, polyacylamide, cooper beech, and vermiculite, and were used for the decolorization of MR from synthetic water by using a fluidized bed bioreactor. The highest specific decolorization rate was obtained when E. agglomerans was entrapped in calcium alginate beads and was of about 3.04 mg MR/g cell/h with a 50% conversion time (t1/2) of about 1.6 h. Moreover, immobilized cells in calcium alginate continuously decolorized MR even after seven repeated experiments without significant loss of activity, while polyacrylamide-, cooper beech-, and vermiculite-immobilized cells retained only 62, 15, and 13% of their original activity, respectively.

Volatilization of Mercury by Immobilized Bacteria ( Klebsiella pneumoniae ) in Different Support by Using Fluidized Bed Bioreactor

Klebsiella pneumoniae, a mercury-resistant bacterial strain able to reduce ionic mercury to metallic mercury, was isolated from wastewater of Casablanca. This strain exhibits high minimal inhibition concentrations for heavy metals such as mercury 2400 μM, lead 8000 μM, silver 2400 μM, and cadmium 1000 μM. This bacterium was immobilized in alginate, polyacrylamide, vermiculite, and cooper beech and was used for removing mercury from a synthetic water polluted by mercury by using a fluidized bead bioreactor. Immobilized bacterial cells of Klebsiella pneumoniae could effectively volatilize mercury and detoxify mercury compounds. Moreover, the efficiency of mercury volatilization was much greater than with the native cells. The highest cleanup and volatilization rates were obtained when Klebsiella pneumoniae was entrapped in alginate beads, with a cleanup rate of 100% and a volatilization rate of 89%. Immobilized cells in alginate continuously volatilized mercury even after 10 days without loss of activity.

A comparative study on biosorption characteristics of certain fungi for bromophenol blue dye.

Laboratory investigations of the potential use of dried biomasses of Rhizopus stolonifer, Fusarium sp., Geotrichum sp., and Aspergillus fumigatus as biosorbents for the removal of bromophenol blue (BPB) dye from aqueous solutions were conducted. Kinetics studies indicated that the BPB dye uptake processes can be well described by the pseudo-second-order model. The fungal biomasses exhibited the highest dye biosorption at pH 2.0. The Langmuir adsorption model appears to fit the dye biosorption better than the Freundlich model, with maximum dye uptake capacities ranging from 526 to 1111 mg/g, depending on the biomass used.