Yu Gang Shee

Multiwavelength Brillouin-erbium fiber laser with double-Brillouin-frequency spacing

We demonstrate a multiwavelength Brillouin-erbium fiber laser with double-Brillouin-frequency spacing. The wider channel spacing is realized by circulating the odd-order Stokes signals in the Brillouin gain medium through a four-port circulator. The circulated odd-order Stokes signals are amplified by the Brillouin gain and thus produce even-order Stokes signals at the output. These signals are then amplified by erbium gain block to form a ring-cavity laser. Ten channels with 0.174 nm spacing that are generated at 0.5 mW Brillouin pump power and 150 mW pump power at 1480 nm can be tuned from 1556 nm to 1564 nm. The minimum optical signal-to-noise ratio of the generated output channels is 30 dB with maximum power fluctuations of ±0.5 dB.

Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core

We propose a surface plasmon resonance (SPR) sensor based on photonic crystal fiber (PCF) with selectively filled analyte channels. Silver is used as the plasmonic material to accurately detect the analytes and is coated with a thin graphene layer to prevent oxidation. The liquid-filled cores are placed near to the metallic channel for easy excitation of free electrons to produce surface plasmon waves (SPWs). Surface plasmons along the metal surface are excited with a leaky Gaussian-like core guided mode. Numerical investigations of the fiber’s properties and sensing performance are performed using the finite element method (FEM). The proposed sensor shows maximum amplitude sensitivity of 418 Refractive Index Units (RIU−1) with resolution as high as 2.4 × 10−5 RIU. Using the wavelength interrogation method, a maximum refractive index (RI) sensitivity of 3000 nm/RIU in the sensing range of 1.46–1.49 is achieved. The proposed sensor is suitable for detecting various high RI chemicals, biochemical and organic chemical analytes. Additionally, the effects of fiber structural parameters on the properties of plasmonic excitation are investigated and optimized for sensing performance as well as reducing the sensor’s footprint.

Surface Plasmon Resonance Photonic Crystal Fiber Biosensor: A Practical Sensing Approach

We propose a simple, two rings, hexagonal lattice photonic crystal fiber biosensor using surface plasmon resonance phenomenon. An active plasmonic gold layer and the analyte (sample) are placed outside the fiber structure instead of inside the air-holes, which will result in a simpler and straight forward fabrication process. The proposed sensor exhibits birefringent behavior that enhances its sensitivity. Numerical investigation of the guiding properties and sensing performance are conducted by finite element method. Using wavelength and amplitude interrogation methods, the proposed sensor could provide maximum sensitivity of 4000 nm/RIU and 320 RIU-1, respectively. The resolutions of the sensor are 2.5 × 10-5 and 3.125 × 10-5 RIU for wavelength and amplitude interrogation modes. The proposed sensor design shows promising results that could be used in biological and biochemical analytes detection.

Highly sensitive multi-core flat fiber surface plasmon resonance refractive index sensor

A simple multi-core flat fiber (MCFF) based surface plasmon resonance (SPR) sensor operating in telecommunication wavelengths is proposed for refractive index sensing. Chemically stable gold (Au) and titanium dioxide (TiO(2)) layers are used outside the fiber structure to realize a simple detection mechanism. The modeled sensor shows average wavelength interrogation sensitivity of 9,600 nm/RIU (Refractive Index Unit) and maximum sensitivity of 23,000 nm/RIU in the sensing range of 1.46-1.485 and 1.47-1.475, respectively. Moreover, the refractive index resolution of 4.35 × 10(-6) is demonstrated. Additionally, proposed sensor had shown the maximum amplitude interrogation sensitivity of 820 RIU(-1), with the sensor resolution of 1.22 × 10(-5) RIU. To the best of our knowledge, the proposed sensor achieved the highest wavelength interrogation sensitivity among the reported fiber based SPR sensors. Finally we anticipate that, this novel and highly sensitive MCFF SPR sensor will find the potential applications in real time remote sensing and monitoring, ultimately enabling inexpensive and accurate chemical and biochemical analytes detection.

Copper-Graphene-Based Photonic Crystal Fiber Plasmonic Biosensor

We propose a photonic crystal fiber surface plasmon resonance biosensor where the plasmonic metal layer and the sensing layer are placed outside the fiber structure, which makes the sensor configuration practically simpler and the sensing process more straightforward. Considering the long-term stability of the plasmonic performance, copper (Cu) is used as the plasmonic material, and graphene is used to prevent Cu oxidation and enhance sensing performance. Numerical investigation of guiding properties and sensing performance is performed by using a finite-element method. The proposed sensor shows average wavelength interrogation sensitivity of 2000 nm/refractive index unit (RIU) over the analyte refractive indices ranging from 1.33 to 1.37, which leads to a sensor resolution of 5 × 10-5 RIU. Due to the simple structure and promising results, the proposed sensor could be a potential candidate for detecting biomolecules, organic chemicals, and other analytes.

All-optical generation of a 21 GHz microwave carrier by incorporating a double-Brillouin frequency shifter

An all-optical generation of a microwave carrier at 21 GHz that incorporates a double-Brillouin frequency shifter is presented. The frequency shift of approximately 21 GHz is achieved by generating the second-order Brillouin Stokes signal from the Brillouin pump. This is accomplished through the circulation and isolation of its first-order Stokes signal in the optical fiber. The Brillouin pump signal is heterodyned with its second-order Brillouin Stokes signal at a high-speed photodetector, and the output beating frequency is equal to the offset between these two signals. The generated microwave carrier is measured at 21.3968 GHz, and the carrier phase noise as low as -58.67 dBc/Hz is achieved.

Threshold Reduction of Stimulated Brillouin Scattering in Photonic Crystal Fiber

A simple configuration for the reduction of stimulated Brillouin scattering threshold in photonic crystal fiber is presented. The threshold reduction is contributed by the bidirectional pumping scheme through the reflection of transmitted Brillouin pump back to the gain medium. The pump recycling scheme has greatly reduced the Brillouin threshold of a 200-m long of photonic crystal fiber from 50 to 30 mW of Brillouin pump power.

Double Brillouin frequency shift through circulation of odd-order Stokes signal

We demonstrate a simple configuration for generating a double Brillouin frequency shift through the circulation of an odd-order Brillouin Stokes signal. It is operated based on cascaded Brillouin scattering in single-mode optical fibers that behave as the Brillouin gain media. A four-port circulator is incorporated into the setup to circulate the odd-order Brillouin Stokes signal in the fiber. It thus initiates a higher order Brillouin Stokes signal, which is double Brillouin frequency downshifted from the input signal. For the 5 km long fiber, the Brillouin pump power at 23 mW gives a clean output spectrum with 30 dB sideband suppression ratio. The output signal is 0.174 nm or approximately 21.7 GHz downshifted from the input signal.

Fiber Bragg Gratings Hydrogen Sensor for Monitoring the Degradation of Transformer Oil

In this paper, two fiber Bragg gratings (FBGs) sensors, which are based on different palladium (Pd) coatings ratios, was proposed to detect the dissolved hydrogen gas content in transformer oil. The FBG samples were prepared using a physical vapor deposition technique. Two samples were prepared with different Pd coating compositions. The first sample was coated with 100% Pd (Pd₁₀₀), and the second sample was coated with mixture of Pd chromium (Pd₅₈Cr₄₂) that has a ratio of 58:42. Pd₁₀₀ sensor showed faster response to dissolved hydrogen than the Pd₅₈Cr₄₂ sensor. In addition, the Pd₁₀₀ sensor exerted higher strain at lower dissolved hydrogen content to the FBG compared with the Pd₅₈Cr₄₂ sensor. The Pd₁₀₀ sensor has higher sensitivity, and the response range is limited to lower hydrogen content. This paper has showed the potential of using alloy like chromium to the Pd metal to enhance the dissolved hydrogen detection range.

Numerical investigation on cascaded 1 × 3 photonic crystal power splitter based on asymmetric and symmetric 1 × 2 photonic crystal splitters designed with flexible structural defects

We propose a photonic crystal slab-based 1 × 3 power splitter with high output transmission and equal power distribution. It is designed by cascading an asymmetric 1 × 2 power splitter and a symmetric 1 × 2 power splitter. Desired equal power splitting is achieved by introducing and optimizing the splitting region of the 1 × 2 power splitters with flexible structural defects. Simulations were carried out by using 3-D Finite Difference Time Domain method showing equal normalized power distributions of 29.6%, 28.9% and 30.5% at 1550 nm optical wavelength. In addition, equal power splitting also takes place at 1561 nm.