Yu. P. Pinzhin

Modification of the microstructure of TiN-based columnar coatings in indentation zones

The columnar structure of titanium nitride-based coatings deposited by magnetron sputtering is studied. The structure-phase state of the coatings is analyzed after deposition and in the indentation zone. The type of dislocation structure, the grain size, the subgrain size, the misorientations at boundaries, and their change during coating growth are determined. The detected decrease (several tens of percent) in the coating thickness under an indenter indicates plastic deformation of a coating. On a microscopic level, this deformation manifests itself in an increase in the density, the misorientation, and the nonequilibrium of boundaries.

The effect of thermomechanical treatment regimes on microstructure and mechanical properties of V–Me(Cr, W)–Zr–C alloys

The regularities of the formation of a heterophase structure in dispersion-strengthened vanadium V–Me(Cr, W)–Zr–C alloys are studied as a function of the regimes of their thermomechanical treatment. The regimes of treatment providing a substantial increase in the dispersity and homogeneity of spatial distribution of ZrC particles, temperature of recrystallization, and high-temperature (at T = 800°C) short-time strength are found in comparison to conventional treatment regimes.

Microstructure and mechanical properties of V–4Ti–4Cr alloy as a function of the chemical heat treatment regimes

The regularities of the formation of a heterophase structure and mechanical properties of V–4Ti–4Cr alloy as a function of thermomechanical and chemical heat treatments are studied. The regimes of thermomechanical treatment which provide the formation of a heterophase structure with a homogeneous volume distribution of oxycarbonitride nanoparticles with a size of about 10 nm and an increase in the volume content and thermal stability of this phase and which provide an increase in the temperature of alloy recrystallization are developed. The formation of the heterophase structure results in a substantial (up to 70%) increase in the short-term high-temperature strength of the alloy at T = 800°C. The increase in the strength is achieved while keeping a rather high level of plasticity.