Yudan Wang

The heavy ion cooler-storage-ring project (HIRFL-CSR) at Lanzhou

HIRFL-CSR, a new ion Cooler-Storage-Ring (CSR) project, is the post-acceleration system of the Heavy Ion Research Facility in Lanzhou (HIRFL). It consists of a main ring (CSRm) and an experimental ring (CSRe). From the HIRFL cyclotron system the heavy ions will be accumulated, cooled and accelerated in the CSRm, then extracted fast to produce radioactive ion beams (RIB) or highly charged heavy ions. Those secondary beams will be accepted and stored by the CSRe for many internal-target experiments with electron cooling.

Ratio-contrast imaging of dual-energy absorption for element mapping with a scanning transmission X-ray microscope

The detection of chemical mapping with a spatial resolution of 30 nm has been achieved with a scanning transmission X-ray microscope at the Shanghai Synchrotron Radiation Facility. For each specimen, two absorption images were scanned separately with energies E(1) and E(2): E(1) was focused on the absorption edge of the chosen element and E(2) was focused below the edge. A K-edge division method is proposed and applied to obtain the element mapping. Compared with the frequently used K-edge subtraction method, this ratio-contrast method is shown to be more accurate and sensitive in identifying the elements of interest, where the definition of the contrast threshold is simple and clear in physics. Several examples are presented to illustrate the effectiveness of the method.

A new low drift integrator system for the Experiment Advanced Superconductor Tokamak

A new type of the integrator system with the low drift characteristic has been developed to accommodate the long pulse plasma discharges on Experiment Advanced Superconductor Tokamak (EAST). The integrator system is composed of the Ethernet control module and the integral module which includes one integrator circuit, followed by two isolation circuits and two program-controlled amplifier circuits. It compensates automatically integration drift and is applied in real-time control. The performance test and the experimental results in plasma discharges show that the developed integrator system can meet the requirements of plasma control on the accuracy and noise level of the integrator in long pulse discharges.

Fast and accurate X‐ray fluorescence computed tomography imaging with the ordered‐subsets expectation maximization algorithm

The ordered-subsets expectation maximization algorithm (OSEM) is introduced to X-ray fluorescence computed tomography (XFCT) and studied; here, simulations and experimental results are presented. The simulation results indicate that OSEM is more accurate than the filtered back-projection algorithm, and it can efficiently suppress the deterioration of image quality within a large range of angular sampling intervals. Experimental results of both an artificial phantom and cirrhotic liver show that with a satisfying image quality the angular sampling interval could be improved to save on the data-acquisition time when OSEM is employed. In addition, with an optimum number of subsets, the image reconstruction time of OSEM could be reduced to about half of the time required for one subset. Accordingly, it can be concluded that OSEM is a potential method for fast and accurate XFCT imaging.

ECR ion sources at the Institute of Modern Physics: From classical to fully superconducting device

Electron cyclotron resonance (ECR) ion sources are used for cyclotron complex and atomic physics research at the Institute of Modern Physics (IMP). Intense beams of highly charged gaseous and metallic ions could be produced by the IMP 14.5 GHz ECR ion source (LECR2-Lanzhou Electron Cyclotron Resonance Ion Source No. 2). A particular emphasis has been put on the production of metallic ion beams recently. Metallic ion beams of Mg, Ca, Fe, Ni, Cu, Zn, and Pb were tested at the IMP 14.5 GHz ECR ion source (LECR2) to improve beam intensities and long-term stability. A new ECR ion source (Lanzhou Electron Cyclotron Resonance Ion Source No. 3), an upgraded version of the IMP 14.5 GHz ECR (LECR2) but with double-frequency wave heating (10 GHz + 14.5 GHz), is under commissioning. The preliminary results of this new source will be presented. To satisfy the requirements of the heavy ion cooling storage ring that is under construction at IMP, a fully superconducting ECR ion source (Lanzhou Electron Cyclotron Resonance Ion Source with Superconducting Coils) with a completely new structure is being developed for the production of intense heavy ion beams of very high charge states, such as Xe30+ and U40+. The superconducting magnet consists of three axial solenoid coils and six saddle-curved sextupole coils with a cold iron structure as field booster and clamp. At full excitation, this magnet assembly will produce maximum peak fields on axis of 4.0 T at the injection, 2.2 T at the extraction region, and a radial sextupole field of 2.0 T at plasma chamber wall. The design features and status of this new superconducting ECR ion source will be presented

Evaluation of multiple-scale 3D characterization for coal physical structure with DCM method and synchrotron X-ray CT.

Multiscale nondestructive characterization of coal microscopic physical structure can provide important information for coal conversion and coal-bed methane extraction. In this study, the physical structure of a coal sample was investigated by synchrotron-based multiple-energy X-ray CT at three beam energies and two different spatial resolutions. A data-constrained modeling (DCM) approach was used to quantitatively characterize the multiscale compositional distributions at the two resolutions. The volume fractions of each voxel for four different composition groups were obtained at the two resolutions. Between the two resolutions, the difference for DCM computed volume fractions of coal matrix and pores is less than 0.3%, and the difference for mineral composition groups is less than 0.17%. This demonstrates that the DCM approach can account for compositions beyond the X-ray CT imaging resolution with adequate accuracy. By using DCM, it is possible to characterize a relatively large coal sample at a relatively low spatial resolution with minimal loss of the effect due to subpixel fine length scale structures.

X-ray propagation-based equally sloped tomography for mouse brain

BACKGROUND The outstanding functional importance of the brain implies a strong need for brain imaging modalities. However, the current imaging approaches that target the brain in rodents remain suboptimal. OBJECTIVE AND METHODS In this paper, X-ray propagation-based phase contrast imaging combined with equally sloped tomography (PPCI-EST) was employed to nondestructively investigate the mouse brain. RESULTS The grey and white matters, which have extremely small differences in electron density, were clearly discriminated. The fine structures, including the corpus callosum (cc), the optic chiasma (ox) and the caudate putamen (CPu), were revealed. Compared to the filtered back projection reconstruction, the PPCI-EST significantly reduce projection number while maintaining sufficient image quality. CONCLUSIONS It could be a potential tool for fast and low-dose phase-contrast imaging to biomedical specimens.

Speckle-tracking X-ray phase-contrast imaging for samples with obvious edge-enhancement effect

Compared to the grating or crystal-based X-ray phase contrast imaging, the speckle-tracking method has the advantages of a simple setup and two-dimensional imaging. However, the edge-enhancement effect prevents the application of the speckle-tracking imaging to a large variety of samples. In this letter, an image reconstruction method is proposed to solve this problem. The experimental results from phantom, a biomedical sample, and a sample with a speckle-resembling structure demonstrated that the proposed method is efficacious in eliminating the effect of edge enhancement. The proposed method may greatly expand the application of the speckle-tracking method to most biomedical and material samples.

Identification of ginseng root using quantitative X-ray microtomography

Background The use of X-ray phase-contrast microtomography for the investigation of Chinese medicinal materials is advantageous for its nondestructive, in situ, and three-dimensional quantitative imaging properties. Methods The X-ray phase-contrast microtomography quantitative imaging method was used to investigate the microstructure of ginseng, and the phase-retrieval method is also employed to process the experimental data. Four different ginseng samples were collected and investigated; these were classified according to their species, production area, and sample growth pattern. Results The quantitative internal characteristic microstructures of ginseng were extracted successfully. The size and position distributions of the calcium oxalate cluster crystals (COCCs), important secondary metabolites that accumulate in ginseng, are revealed by the three-dimensional quantitative imaging method. The volume and amount of the COCCs in different species of the ginseng are obtained by a quantitative analysis of the three-dimensional microstructures, which shows obvious difference among the four species of ginseng. Conclusion This study is the first to provide evidence of the distribution characteristics of COCCs to identify four types of ginseng, with regard to species authentication and age identification, by X-ray phase-contrast microtomography quantitative imaging. This method is also expected to reveal important relationships between COCCs and the occurrence of the effective medicinal components of ginseng.

A low dose and in-vivo imaging system based on equally sloped tomography

High radiation dose impedes the development of in-vivo micro-CT. In this paper, we presents a low dose and fast invivo micro computed tomography (micro-CT) system based on equally sloped tomography (EST) technique and the monochromatic synchrotron X-ray source. Comparing with regular CT, the projection number required for our imaging system can be reduced by about 75%. In addition, combining with an X-ray shutter, total exposure time of 4 seconds and about 0.67Gy absorption dose for a set of CT data have been achieved. These results demonstrate that micro-CT with monochromatic synchrotron X-rays has great potential in the investigation into the microstructure evolution inside a small animal for biomedical research.