Yuegang Fu
Changchun University of Science and Technology
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Yuegang Fu.
Applied Optics | 2013
Wenjun He; Yuegang Fu; Yang Zheng; Lei Zhang; Jiake Wang; Zhiying Liu; Jianping Zheng
The output polarization states of corner cubes (for both uncoated and metal-coated surfaces) with an input beam of arbitrary polarization state and of arbitrary tilt angle to the cube have been analyzed by using the three-dimensional polarization ray-tracing matrix method. The diattenuation and retardance of the corner-cube retroreflector (CCR) for all six different ray paths are calculated, and the relationships to the tilt angle and the tilt orientation angle are shown. When the tilt angle is large, hollow metal-coated CCR is more appropriate than solid metal-coated CCR for the case that the polarization states of output beam should be controlled.
International Conference on Optical Instruments and Technology 2017: Optoelectronic Measurement Technology and System | 2018
Wenjun He; Zhiying Liu; Yuegang Fu; Jigui Zhu; Kexin Xu; Liquan Dong; Hwa-Yaw Tam; Hai Xiao
We propose an optoelectronic measurement system for testing the optical parameters of infrared seeker, such as the position of the image plane, the size of the diffused spot, and the diameter of the scanning circle. The measurement method and operating principle of the optoelectronic measurement system have been introduced. The source of the stray light in the optoelectronic measurement system have been analyzed by using FRED software, and the stray light have been restricted effectively by a co-centered mica plate which closes to the substrate of pinhole. Experimental results show that the test error for the size of the diffused spot is less than ±0.01 mm, the test errors for the position of the image plane and the diameter of the scanning circle are less than ±0.02 mm.
International Conference on Optical Instruments and Technology 2017: Optical Systems and Modern Optoelectronic Instruments | 2018
Wenjun He; Wentao Jia; Zhiying Liu; Yuegang Fu; Liquan Dong; Yongtian Wang; Baohua Jia; Kimio Tatsuno
An optical attenuator with special performances, such as wide spectrum, high precision, polarization-independent, and lager dynamic range, is the key device for testing the communicat ion link performance in free-space laser communicat ion systems. We propose a polarizat ion-independent variable optical attenuator based on rhombic prism. Two rhombic prisms are used to balance the polarization aberrat ions, and the incident surfaces of the rhombic prisms are perpendicular to each other. We control the incident angle of the rays, which incident the reflected surfaces of the rhombic prisms, between the Brewster angle and the critical angle, then the attenuation coefficient of the attenuator can be changed. The results of theoretical analysis and numerical simulation show that the designed attenuator is polarization independent, the wavelength range is from 790nm to 1550nm, the dynamic range of attenuation coefficient is from -40 dB to -3 dB, and the wavefront aberration is less than /20@974nm.
Advanced Optical Design and Manufacturing Technology and Astronomical Telescopes and Instrumentation | 2016
Jiake Wang; Jia Xu; Yuegang Fu; Wenjun He; Qifan Zhu
In view of the light energy loss in central obscuration of coaxial reflex optical system, the design method of a kind of hollow beam generator is introduced. First of all, according to the geometrical parameter and obscuration ratio of front-end coaxial reflex optical system, calculate the required physical dimension of hollow beam, and get the beam expanding rate of the hollow beam generator according to the parameters of the light source. Choose the better enlargement ratio of initial expanding system using the relational expression of beam expanding rate and beam expanding rate of initial system; the traditional design method of the reflex optical system is used to design the initial optical system, and then the position of rotation axis of the hollow beam generator can be obtained through the rotation axis translation formula. Intercept the initial system bus bar using the rotation axis after the translation, and rotate the bus bar around the rotation axis for 360°, so that two working faces of the hollow beam generator can be got. The hollow beam generator designed by this method can get the hollow beam that matches the front-end coaxial reflex optical system, improving the energy utilization ratio of beam and effectively reducing the back scattering of transmission system.
Archive | 2011
Chenhao Ma; Yuegang Fu; Jiake Wang; Yuan Hu; Zhiying Liu
Archive | 2009
Lei Zhang; Yuegang Fu; Jianping Zheng; Lu Zhang; Zhiying Liu; Yuan Hu
Archive | 2011
Jiake Wang; Yuegang Fu; Tao Lv; Mingzhao Ouyang; Tianyuan Gao; Lei Zhang
Archive | 2011
Jinhong Gao; Zhiying Liu; Yuegang Fu; Jiake Wang; Mingzhao Ouyang
Archive | 2011
Yuegang Fu; Tianyuan Gao; Yuan Hu; Peng Lin; Zhiying Liu; Rongmin Sun; Jiake Wang; Lei Zhang
Archive | 2010
Yuegang Fu; Tianyuan Gao; Yuan Hu; Zhiying Liu; Jiake Wang; Lei Zhang