Yujin Tong

Surface-Segregated Monolayers: A New Type of Ordered Monolayer for Surface Modification of Organic Semiconductors

We report a new type of ordered monolayer for the surface modification of organic semiconductors. Fullerene derivatives with fluorocarbon chains ([6,6]-phenyl-C(61)-buryric acid 1H,1H-perfluoro-1-alkyl ester or FC(n)) spontaneously segregated as a monolayer on the surface of a [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) film during a spin-coating process from the mixture solutions, as confirmed by X-ray photoelectron spectroscopy (XPS). Ultraviolet photoelectron spectroscopy (UPS) showed the shift of ionization potentials (IPs) depending on the fluorocarbon chain length, indicating the formation of surface dipole moments. Surface-sensitive vibrational spectroscopy, sum frequency generation (SFG) revealed the ordered molecular orientations of the C(60) moiety in the surface FC(n) layers. The intensity of the SFG signals from FC(n) on the surface showed a clear odd-even effect when the length of the fluorocarbon chain was changed. This new concept of the surface-segregated monolayer provides a facile and versatile approach to modifying the surface of organic semiconductors and is applicable to various organic optoelectronic devices.

Interference effects in the sum frequency generation spectra of thin organic films. I. Theoretical modeling and simulation

A general theoretical calculation is described for predicting the interference effect in the sum frequency generation (SFG) spectra from a model thin-film system as a function of film thickness. The calculations were carried out for a three-layer thin film consisting of an organic monolayer, a dielectric thin film of variable thickness, and a gold substrate. This system comprises two sources of SFG, namely, a resonant contribution from the monolayer/dielectric film interface and a nonresonant contribution from the dielectric film/gold interface. The calculation shows that both the spectral intensity and the shape of the SFG spectra vary significantly with the thickness of the dielectric layer due to interference effects in the thin film. The intensity changes at a particular frequency were explained in terms of the changes in the local field factors (L factors) as a function of the dielectric film thickness. The L factor for each beam changes periodically with the thickness of the dielectric film. However, the combined L factor for the three beams shows complicated thickness dependent features and no clear periodicity was found. On the other hand, if the susceptibilities of both the resonant and nonresonant terms are fixed, changes in the spectral shape will be mainly due to changes in the phase differences between the two terms with the film thickness. The interference behavior also depends strongly on the polarization combinations of the sum frequency, visible, and infrared beams. A general method is provided for predicting changes in the spectral shapes at different film thicknesses by taking into account the relative intensities and phases of the SFG signals from the two interfaces. The model calculation provides important insights for understanding the nonlinear optical responses from any thin-film system and is an essential tool for quantitatively revealing the nonlinear susceptibilities, which are directly related to the actual structure of the interfacial molecules from the observed SFG spectra after quantitative removal of the L factors.

Preferential adsorption of amino-terminated silane in a binary mixed self-assembled monolayer.

The composition and structure of a binary mixed self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APS, NH(2)(CH(2))(3)Si(OCH(2)CH(3))(3)) and octadecyltrimethoxysilane (ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)) on a silicon oxide surface have been characterized by water contact-angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. XPS demonstrated that APS in the mixed SAM is significantly enriched in comparison to that in solution, indicating the preferential adsorption of APS during the SAM formation. AFM observations showed that the mixed SAM becomes rougher. SFG revealed that the coadsorption of APS induced a conformation disordering in the ODS molecules present in the mixed SAM. The surface enrichment of APS has been explained in terms of differences in the surface adsorption rates of the two components as well as in the self-congregation states of APS molecules in the bulk solution. Furthermore, the structure of the water molecules on the mixed SAM surface in contact with the aqueous solutions at different pHs has also been studied. The results indicate that the mixed-SAM modified surface is positively charged at pH < 5 and negatively charged at pH > 7.

Interference effects in the sum frequency generation spectra of thin organic films. II: Applications to different thin-film systems

In this paper, the results of the modeling calculations carried out for predicting the interference effects expected in the sum frequency generation (SFG) spectra of a specific thin-layer system, described in the accompanying paper, are tested by comparing them with the experimental spectra obtained for a real thin-layer film comprising an organic monolayer/variable thickness dielectric layer/gold substrate. In this system, two contributions to the SFG spectra arise, a resonant contribution from the organic film and a nonresonant contribution from the gold substrate. The modeling calculations are in excellent agreement with the experimental spectra over a wide range of thicknesses and for different polarization combinations. The introduction of another resonant monolayer adjacent to the gold substrate and with the molecules having a reverse orientation has a significant affect on the spectral shapes which is predicted. If a dielectric substrate such as CaF(2) is used instead of a gold substrate, only the spectral intensities vary with the film thickness but not the spectral shapes. The counterpropagating beam geometry will change both the thickness dependent spectral shapes and the intensity of different vibrational modes in comparison with a copropagating geometry. The influences of these experimental factors, i.e., the molecular orientational structure in the thin film, the nature of the substrate, and the selected incident beam geometry, on the experimental SFG spectra are quantitatively predicted by the calculations. The thickness effects on the signals from a SFG active monolayer contained in a thin liquid-layer cell of the type frequently used for in situ electrochemical measurements is also discussed. The modeling calculation is also valid for application to other thin-film systems comprising more than two resonant SFG active interfaces by appropriate choice of optical geometries and relevant optical properties.

Optically probing Al—O and O—H vibrations to characterize water adsorption and surface reconstruction on α-alumina: An experimental and theoretical study

Oxide/water interfaces are ubiquitous in a wide variety of applications and the environment. Despite this ubiquity, and attendant decades of study, gaining molecular level insight into water/oxide interaction has proven challenging. In part, this challenge springs from a lack of tools to concurrently characterize changes in surface structure (i.e., water/oxide interaction from the perspective of the solid) and O-H population and local environment (i.e., water/oxide interaction from the water perspective). Here, we demonstrate the application of surface specific vibrational spectroscopy to the characterization of the interaction of the paradigmatic α-Al2O3(0001) surface and water. By probing both the interfacial Al-O (surface phonon) and O-H spectral response, we characterize this interaction from both perspectives. Through electronic structure calculation, we assign the interfacial Al-O response and rationalize its changes on surface dehydroxylation and reconstruction. Because our technique is all-optical and interface specific, it is equally applicable to oxide surfaces in vacuum, ambient atmospheres and at the solid/liquid interface. Application of this approach to additional alumina surfaces and other oxides thus seems likely to significantly expand our understanding of how water meets oxide surfaces and thus the wide variety of phenomena this interaction controls.

Fabrication of photochemical pattern on a self-assembled monolayer (SAM) of a ruthenium cluster under electrochemical control

A new strategy is proposed for the fabrication of photochemical pattern of a self-assembled monolayer (SAM) of an oxo-centered tri-ruthenium (Ru3) cluster on a gold electrode surface. The fabrication was achieved under combined photochemical and electrochemical controls. By this strategy, the patterned SAM surfaces terminated with different kinds of moiety groups such as carbon monoxide (CO), nitric oxide (NO) and a successive layer of Ru3 cluster by ligand-exchange reaction are obtained with high yields.

Interfacial structure of soft matter probed by SFG spectroscopy.

Sum frequency generation (SFG) vibrational spectroscopy, an interface-specific technique in contrast to, for example, attenuated total reflectance spectroscopy, which is only interface sensitive, has been employed to investigate the surface and interface structure of soft matter on a molecular scale. The experimental arrangement required to carry out SFG spectroscopy, with particular reference to soft matter, and the analytical methods developed to interpret the spectra are described. The elucidation of the interfacial structure of soft matter systems is an essential prerequisite in order to understand and eventually control the surface properties of these important functional materials.

Enzyme-catalyzed hydrolysis of the supported phospholipid bilayers studied by atomic force microscopy.

Atomic force microscopy (AFM) is employed to reveal the morphological changes of the supported phospholipid bilayers hydrolyzed by a phospholipase A(2) (PLA(2)) enzyme in a buffer solution at room temperature. Based on the high catalytic selectivity of PLA(2) toward l-enantiomer phospholipids, five kinds of supported bilayers made of l- and D-dipalmitoylphosphatidylcholines (DPPC), including l-DPPC (upper leaflet adjacent to solution)/l-DPPC (bottom leaflet) (or l/l in short), l/d, d/l, d/d, and racemic ld/ld, were prepared on a mica surface in gel-phase, to explicate the kinetics and mechanism of the enzyme-induced hydrolysis reaction in detail. AFM observations for the l/l bilayer show that the hydrolysis rate for l-DPPC is significantly increased by PLA(2) and most of the hydrolysis products desorb from substrate surface in 40 min. As d-enantiomers are included in the bilayer, the hydrolysis rate is largely decreased in comparison with the l/l bilayer. The time used to hydrolyze the as-prepared bilayers by PLA(2) increases in the sequence of l/l, l/d, ld/ld, and d/l (d/d is inert to the enzyme action). d-enantiomers in the enantiomer hybrid bilayers remain on the mica surface at the end of the hydrolysis reaction. It was confirmed that the hydrolysis reaction catalyzed by PLA(2) preferentially occurs at the edges of pits or defects on the bilayer surface. The bilayer structures are preserved during the hydrolysis process. Based on these observations, a novel kinetics model is proposed to quantitatively account for the PLA(2)-catalyzed hydrolysis of the supported phospholipid bilayers. The model simulation demonstrates that PLA(2) mainly binds with lipids at the perimeter of defects in the upper leaflet and leads to a hydrolysis reaction, yielding species soluble to the solution phase. The lipid molecules underneath subsequently flip up to the upper leaflet to maintain the hydrophilicity of the bilayer structure. Our analysis shows that d-enantiomers in the hybrid bilayers considerably reduce the hydrolysis rate by its ineffective binding with PLA(2).

Effect of functional group on the monolayer structures of biodegradable quaternary ammonium surfactants.

The monolayer structures and conformational ordering of cationic surfactants including the biodegradable quaternary ammonium molecules have been systematically characterized by π-A isotherm, surface potential, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and sum frequency generation (SFG) vibrational spectroscopy. It was found that the monolayer of the typical dialkyl dimethylammonium on the water surface was less densely packed along with many conformational gauche defects. The packing density and ordering of these monolayers were improved as halide ions were added to the subphase. A similar condensation effect was also observed when amide or ester groups are present in the alkyl tails of the surfactant. These results are discussed on the basis of the repulsive electrostatic interactions between the terminal ammonium moieties, the hydrogen bonding between the functional groups in the alkyl chains, as well as the flexibility of the alkyl chains in these surfactants. The present study is crucial to understanding the relationship between the interfacial structures and the functionalities of the biodegradable quaternary ammonium surfactants.

Self-assembled monolayers formed using zero net curvature norbornylogous bridges: the influence of potential on molecular orientation.

A new class of electroactive norbornylogous bridges, with no net curvature, that form self-assembled monolayers on gold electrodes were studied by electrochemistry and in situ infrared spectroscopy. The influence of the electrode potential on the structure and conformation of the self-assembled monolayers (SAMs) was investigated. This was performed using two different lengths of rigid norbornylogous bridges with terminal ferrocene moieties and ω-hydroxyalkanethiols. It was found that single component monolayers of the rigid norbornylogous bridges changed their tilt angle with their transition from the ferrocene to ferricinium. However, when the norbornylogous SAMs were diluted with ω-hydroxyalkanethiols the tilt angle remained unchanged upon oxidation of ferrocene to ferricinium. It was also observed that the tilt angle of the diluent, ω-hydroxyalkanethiols changed at potentials exceeding 500 mV.