Yuki Imura

Micro Total Bioassay System for Ingested Substances: Assessment of Intestinal Absorption, Hepatic Metabolism, and Bioactivity

Oral medicines and food constituents are absorbed in the intestine and metabolized in the liver, after which they exhibit their activity toward a target tissue. Micromodels of human tissues were developed to mimic these processes and bioactivities. By integrating the micromodels, we realized a micro total bioassay system for oral substances; this system comprised a microintestine, microliver, and the target components. The microchip was composed of a slide glass and polydimethylsiloxane (PDMS) sheets with microchannels fabricated by photolithography. Caco-2 cells were cultured in the intestine component, and HepG2 cells, in the liver component. The human breast carcinoma MCF-7 cells were cultured in the target component, and the activities of anticancer agents and estrogen-like substances were successfully assayed. By using this system, the overall properties of the ingested cyclophosphamide, epirubicin, 17-β estradiol, and soy isoflavone, i.e., their intestinal absorption, hepatic metabolism, and bioactivity toward target cells, could be assayed with operative ease. Further, the assay time and cell consumption were reduced compared to those in conventional in vitro bioassay systems.

Microcirculation System with a Dialysis Part for Bioassays Evaluating Anticancer Activity and Retention

Medicines are distributed to the whole body and excreted over time. A micromodel of the circulation-excretion system was developed to mimic these processes. This system comprised a dialysis part, a microperistaltic pump, and a target tissue. This microcirculation system was created on a microchip composed of a glass slide and polydimethylsiloxane sheets with microchannels fabricated by photolithography. A dialysis membrane was settled between two channels to form the dialysis part, and a pneumatic peristaltic pump was used to make the solution flow. The excretion and half-life of solute substances absorbed to albumin were changed according to their affinity to the protein. MCF-7 human breast cancer cells were cultured as target cells for drug samples, and the activities of anticancer agents were assayed using our system. Our data demonstrated that the anticancer activity of docetaxel or thio-TEPA could be assayed on the microcirculation-excretion chip. This system may allow for reduced consumption of cells and reagents compared to those required for conventional in vitro bioassay systems.

Formation of gold nanoparticles by glycolipids of Lactobacillus casei

Gold nanoparticles have particular properties distinct from those of bulk gold crystals, and such nanoparticles are used in various applications in optics, catalysis, and drug delivery. Many reports on microbial synthesis of gold nanoparticles have appeared. However, the molecular details (reduction and dispersion) of such synthesis remain unclear. In the present study, we studied gold nanoparticle synthesis by Lactobacillus casei. A comparison of L. casei components before and after addition of an auric acid solution showed that the level of unsaturated lipids decreased significantly after addition. NMR and mass spectrum analysis showed that the levels of diglycosyldiacylglycerol (DGDG) and triglycosyldiacylglycerol (TGDG) bearing unsaturated fatty acids were much reduced after formation of gold nanoparticles. DGDG purified from L. casei induced the synthesis of gold nanoparticles in vitro. These results suggested that glycolipids, such as DGDG, play important roles in reducing Au(III) to Au(0) and in ensuring that the nanoparticles synthesized remain small in size. Our work will lead to the development of novel, efficient methods by which gold nanoparticles may be produced by, and accumulated within, microorganisms.

Synthesis of CdSe Quantum Dots Using Fusarium oxysporum

CdSe quantum dots are often used in industry as fluorescent materials. In this study, CdSe quantum dots were synthesized using Fusarium oxysporum. The cadmium and selenium concentration, pH, and temperature for the culture of F. oxysporum (Fusarium oxysporum) were optimized for the synthesis, and the CdSe quantum dots obtained from the mycelial cells of F. oxysporum were observed by transmission electron microscopy. Ultra-thin sections of F. oxysporum showed that the CdSe quantum dots were precipitated in the intracellular space, indicating that cadmium and selenium ions were incorporated into the cell and that the quantum dots were synthesized with intracellular metabolites. To reveal differences in F. oxysporum metabolism, cell extracts of F. oxysporum, before and after CdSe synthesis, were compared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The results suggested that the amount of superoxide dismutase (SOD) decreased after CdSe synthesis. Fluorescence microscopy revealed that cytoplasmic superoxide increased significantly after CdSe synthesis. The accumulation of superoxide may increase the expression of various metabolites that play a role in reducing Se4+ to Se2− and inhibit the aggregation of CdSe to make nanoparticles.

Determination of ferric iron chelators by high-performance liquid chromatography using luminol chemiluminescence detection.

Iron is an essential element for higher plants, and its acquisition and transportation is one of the greatest limiting factors for plant growth because of its low solubility in normal soil pHs. Higher plants biosynthesize ferric iron [Fe(III)] chelator (FIC), which solubilizes the iron and transports it to the rhizosphere. A high-performance liquid chromatography (HPLC) post-column method has been developed for the analysis of FICs using the luminol/H2O2 system for chemiluminescence (CL) detection. A size-exclusion column was the most suited in terms of column efficiency and CL detection efficiency. Mixing of the luminol with H2O2 in a post-column reaction was feasible, and a two-pump system was used to separately deliver the luminol and H2O2 solutions. The luminol and H2O2 concentrations were optimized using Fe(III)-EDTA and Fe(III)-citrate (Cit) solutions as analytes. A strong CL intensity was obtained for Fe(III)-Cit when EDTA was added to the luminol solution, probably because of an exchange of Cit with EDTA after separation on the HPLC column; CL efficiency was much higher for Fe(III)-EDTA than for Fe(III)-Cit with the luminol/H2O2 system. The present method can detect minute levels of Fe(III)-FICs; the detection limits of Fe(III)-EDTA, Fe(III)-Cit and Fe(III)-nicotianamine were 0.77, 2.3 and 1.1pmol, respectively.

High-performance liquid chromatography method for ferric iron chelators using a post-column reaction with Calcein Blue

Iron (Fe) is an essential element for higher plants, which take it up from the soil at the root surface and transport it to shoots through the xylem. Fe(III) chelators, such as organic acids and phytosiderophores, play important roles in the acquisition and transportation of Fe(III). Therefore, a selective and sensitive method for analyzing Fe(III) chelators is required to study the many Fe-related physiological mechanisms in plants. A novel analytical approach employing a high-performance liquid chromatography post-column method with fluorescence detection was developed to separate and detect Fe(III) chelators. This method takes advantage of the quenching of the fluorescence of Calcein Blue (CB) that occurs with the formation of an Fe(III)-CB complex and the dequenching that occurs with the release of CB as a result of competition for Fe(III) between CB and an Fe(III) chelator. This simple experimental method does not require complicated pretreatments and can selectively detect Fe(III) chelators according to their Fe(III)-chelating ability. The detection limit for citric acid using this method was 72pmol. Furthermore, this method can also detect unknown Fe(III) chelators that exhibit a high affinity for Fe(III). The method was evaluated with xylem sap of barley, which was shown to contain several Fe(III) chelators.

Various Shapes of Gold Nanoparticles Synthesized by Glycolipids Extracted from Lactobacillus casei

Gold nanoparticles have particular properties distinct from bulk gold crystals. The gold nanoparticles are used in various applications in optics, catalysis, and drug delivery. Although many reports on microbial synthesis of gold nanoparticles have appeared, the molecular mechanism of gold nanoparticle synthesis in microorganisms is unclear. Previously we reported that the amounts of diglycosyl diacylglycerol (DGDG) and triglycosyldiacylglycerol (TGDG) bearing unsaturated fatty acids were much reduced after formation of gold nanoparticles. DGDG purified from L. casei induced the synthesis of gold nanoparticles in vitro. These results suggested that glycolipids, such as DGDG, play important roles in reducing Au(III) to Au(0). In this paper, we reported that the concentration change of DGDG induced various shapes of gold nanoparticles in vitro. Our work will lead to the development of novel and efficient methods to synthesize metal nanoparticles using microorganisms.

Structural and functional analyses of calcium ion response factors in the mantle of Pinctada fucata

The pearl oyster, Pinctada fucata, is cultured for pearl production in Japan. The shell of the pearl oyster consists of calcium carbonate and a small amount of organic matrix. Despite many studies of the shell matrix proteins, the mechanism by which calcium elements are transported from the mantle to the shell remains unclear. Investigating the molecular mechanism of calcium transportation, we prepared artificial seawater with a high concentration of calcium ions (10ASW) to induce calcification in the pearl oyster. When pearl oysters were cultured in 10ASW, unusual nanoparticles were precipitated on the surface of the nacreous layer. SDS-PAGE and 2D-PAGE analyses revealed that some calcium-sensing proteins (Sarcoplasmic Ca-binding Protein (Pf-SCP) and Pf-filamin A) might be related to the synthesis of these nanoparticles. The recombinant proteins of Pf-SCP can bind to calcium ions and accumulate nanoparticles of calcium carbonate crystals. However, transcriptomic analysis of the pearl oysters grown in 10ASW showed that the matrix protein genes in the shell did not differ before and after treatment with 10ASW. These results suggest that, despite increasing calcium transportation to the shell, treatment with a high concentration of calcium ions does not induce formation of the organic framework in the shell microstructure. These findings offer meaningful insights into the transportation of calcium elements from the mantle to the shell.

Sample Preparation of the Macro Alga Pyropia yezoensis for the Determination of Messenger RNA

ABSTRACT Few nutrients that limit the growth of photoautotrophs in marine environments have been identified. Observing phytoplankton growth after nutrient addition is an effective but time-consuming way of identifying key nutrients. One possible and potentially more efficient approach is to characterize the nutrients that photoautotrophs preferentially absorb. Quantification of transcript levels is suitable for this purpose and may be performed by reverse transcription followed by the polymerase chain reaction. However, since this analysis cannot be performed on-site, a suitable sample preparation method was developed using the marine macroalga Pyropia yezoensis. This study showed that specimen transport, even at temperatures below 10°C, may cause changes in transcript abundance. This was especially true for transcripts associated with the metabolism of macronutrients such as nitrogen and phosphorus. To prevent transport-induced changes in transcript levels and erroneous conclusions, on-site freezing of specimens is recommended when sampling.