Yuki Tokura

Slippery Liquid-Immobilized Coating Films Using in Situ Oxidation–Reduction Reactions of Metal Ions in Polyelectrolyte Films

We fabricated slippery liquid-immobilized coating (SLIC) films by reacting a slippery liquid (polymethylhydrosiloxane) near the surface of a polyelectrolyte film containing silver ions prepared by the layer-by-layer method. The obtained films maintained their slipperiness after chemical and physical treatments, in contrast to slippery liquid-infused porous surfaces. The high chemical and physical stabilities of the films were attributable to gelation and immobilization of the lubricant owing to an oxidation-reduction reaction with subsequent dehydration condensation of Si-OH on the outer surface of the polyelectrolyte film and the bonding of Si-H with NH2 groups within the polyelectrolyte film, respectively. Moreover, the SLIC films exhibited a high degree of slipperiness with respect to low-surface-tension liquids. To the best of our knowledge, this technique of lubricant immobilization using silver ions has not been reported previously. The films should be suitable for use in various applications where contamination must be prevented under extreme conditions, such as those requiring high physical durability and organic solvent use.

Ultrasensitive Detection of Methylmercaptan Gas Using Layered Manganese Oxide Nanosheets with a Quartz Crystal Microbalance Sensor

Methylmercaptan (MM) is a marker of periodontal disease; however, the required sensitivity for MM is parts per billion, which has been challenging to realize with a simple sensor. Here, we report the capability to detect MM at concentrations as low as 20 ppb using layered manganese oxide nanosheets with a quartz crystal microbalance sensor. The sensing capabilities of the manganese oxide nanosheets are promoted by adsorbed water present on and between the nanosheets. The strong adsorption of MM to the sensor, which is necessary for the high sensitivity, leads to significant hysteresis in the response on cycling due to irreversible adsorption. However, the sensor can be readily reset by heating to 80 °C, which leads to highly reproducible response to MM vapor at low concentrations. A key aspect of this sensor design is the high selectivity toward MM in comparison to other compounds such as ethanol, ammonia, acetaldehyde, acetic acid, toluene, and pyridine. This layered nanosheets design for high-sensitivity sensors, demonstrated here for dilute MM, holds significant promise for addressing needs to identify sulfur compounds associated for environmental protection and medical diagnostics.

Bionic Fish-scale Surface Structures Fabricated via the Air/Water Interface for Flexible and Ultrasensitive Pressure Sensors

In recent years, wearable and flexible sensors have attracted considerable research interest and effort owing to their broad application prospects in wearable devices, robotics, health monitoring, and so on. High-sensitivity and low-cost pressure sensors are the primary requirement in practical application. Herein, a convenient and low-cost process to fabricate a bionic fish-scale structure poly(dimethylsiloxane) (PDMS) film via air/water interfacial formation technique is presented. High-sensitivity flexible pressure sensors can be constructed by assembling conductive films of graphene nanosheets into a microstructured film. Thanks to the unique fish-scale structures of PDMS films, the prepared pressure sensor shows excellent performance with high sensitivity (-70.86% kPa-1). In addition, our pressure sensors can detect weak signals, such as wrist pulses, respiration, and voice vibrations. Moreover, the whole process of pressure sensor preparation is cost-effective, eco-friendly, and controllable. The results indicate that the prepared pressure sensor has a profitable and efficient advantage in future applications for monitoring human physiological signals and sensing subtle touch, which may broaden its potential applications in wearable devices.

Heat-Shielding and Self-Cleaning Smart Windows: Near-Infrared Reflective Photonic Crystals with Self-Healing Omniphobicity via Layer-by-Layer Self-Assembly

Bioinspired photonic crystals that can be used to precisely control the optical reflection of light of a specific wavelength by varying their thickness and refractive index have attracted much attention. Among them, photonic crystals that can reflect near-infrared light have attracted attention owing to their potential applications including window coating with heat-shielding property. However, photonic crystals with an optical function in practical use sometimes lose their function because of contamination. Here, a near-infrared reflection coating film with self-healing omniphobicity was designed and prepared by layer-by-layer assembly and an instant liquid phase omniphobization method. The fabricated films had a self-cleaning thermal shielding effect. The films were visually transparent and could be used to control the reflection peak of the near-infrared light (range of 700-1000 nm) by adjusting the film thickness, which prevented the increase in temperature in enclosed spaces. After omniphobization, the films had self-cleaning properties of their surface and retained their optical properties. These functions are promising for practical application on windows as heat-shielding.