Yulia Sevryugina

An Efficient Halogen‐Free Electrolyte for Use in Rechargeable Magnesium Batteries

Unlocking the full potential of rechargeable magnesium batteries has been partially hindered by the reliance on chloride-based complex systems. Despite the high anodic stability of these electrolytes, they are corrosive toward metallic battery components, which reduce their practical electrochemical window. Following on our new design concept involving boron cluster anions, monocarborane CB11H12(-) produced the first halogen-free, simple-type Mg salt that is compatible with Mg metal and displays an oxidative stability surpassing that of ether solvents. Owing to its inertness and non-corrosive nature, the Mg(CB11H12)2/tetraglyme (MMC/G4) electrolyte system permits standardized methods of high-voltage cathode testing that uses a typical coin cell. This achievement is a turning point in the research and development of Mg electrolytes that has deep implications on realizing practical rechargeable Mg batteries.

Carborane-derived local anesthetics are isomer dependent.

Clinically there is a need for local anesthetics with a greater specificity of action on target cells and longer duration. We have synthesized a series of local anesthetic derivatives we call boronicaines in which the aromatic phenyl ring of lidocaine was replaced with ortho‐, meta‐, C,C’‐dimethyl meta‐ and para‐carborane clusters. The boronicaine derivatives were tested for their analgesic activity and compared with lidocaine using standard procedures in mice following a plantar injection. The compounds differed in their analgesic activity in the following order: ortho‐carborane = C,C’‐dimethyl meta‐carborane > para‐carborane > lidocaine > meta‐carborane derivative. Both ortho‐boronicaine and C,C’‐dimethyl meta‐boronicaine had longer durations of analgesia than lidocaine. Differences in analgesic efficacies are rationalized by variations in chemical structure and protein binding characteristics.

Carboranes increase the potency of small molecule inhibitors of nicotinamide phosphoribosyltranferase.

Herein we report the use of carboranes to significantly increase the potency of small molecule inhibitors of nicotinamide phosphoribosyltranferase (Nampt), an enzyme that is central to metabolism and cell survival. We compare the inclusion of carborane with other similarly sized substituents and demonstrate that, compared with their purely organic counterparts, these molecules exhibit up to 10-fold greater antiproliferative activity against cancer cells in vitro and a 100-fold increase in Nampt inhibition.

Reversible Cu4 ↔ Cu6 Core Interconversion and Temperature Induced Single-Crystal-to-Single-Crystal Phase Transition for Copper(I) Carboxylate

The first example of a reversible [Cu(4)] <--> [Cu(6)] interconversion for polynuclear copper(I) complexes under controlled experimental settings is reported. It illustrates the key role of specific crystal growth conditions for accessing the target cluster nuclearity that consequently determines physical properties of the resulting solid state products. Thus, when copper(I) benzoate crystallizes from a 1,2-dichlorobenzene solution at room temperature, it forms [Cu(4)]-core based crystalline material, [Cu(4)(O(2)CC(6)H(5))(4)] (1). In contrast, crystal growth by deposition from the gas phase at elevated temperatures results in the exclusive formation of [Cu(6)(O(2)CC(6)H(5))(6)] (2). Complexes 1 and 2 have been isolated in pure form, fully characterized, and reversibly interconverted into each other. The effect of a core structure on the spectroscopic properties of 1 and 2, such as IR, Raman, and photoluminescence, has been investigated. Additionally, a combination of X-ray powder and single crystal diffraction methods has been used to discover the temperature induced phase transition in the hexanuclear copper(I) system. Two modifications of 2 exhibiting slightly different solid state packing of the [Cu(6)(O(2)CC(6)H(5))(6)] units have been identified at room and low temperature. Moreover, reversible single-crystal-to-single-crystal transitions between these polymorphic forms have been confirmed. The important role of weak intermolecular interactions between polynuclear copper(I) units in the solid state has also been revealed and discussed.

Direct observation of bis(dicarbollyl)nickel conformers in solution by fluorescence spectroscopy: an approach to redox-controlled metallacarborane molecular motors.

As a continuation of work on metallacarborane-based molecular motors, the structures of substituted bis(dicarbollyl)nickel complexes in Ni(III) and Ni(IV) oxidation states were investigated in solution by fluorescence spectroscopy. Symmetrically positioned cage-linked pyrene molecules served as fluorescent probes to enable the observation of mixed meso-trans/dl-gauche (pyrene monomer fluorescence) and dl-cis/dl-gauche (intramolecular pyrene excimer fluorescence with residual monomer fluorescence) cage conformations of the nickelacarboranes in the Ni(III) and Ni(IV) oxidation states, respectively. The absence of energetically disfavored conformers in solution--dl-cis in the case of nickel(III) complexes and meso-trans in the case of nickel(IV)--was demonstrated based on spectroscopic data and conformer energy calculations in solution. The conformational persistence observed in solution indicates that bis(dicarbollyl)nickel complexes may provide attractive templates for building electrically driven and/or photodriven molecular motors.

Synthesis of [closo-B12(OH)11NH3]−: A New Heterobifunctional Dodecaborane Scaffold for Drug Delivery Applications

Effective utilization of [closo-B12H12](2-) derivatives in targeted drug delivery applications depends upon an efficient strategy to differentiate at least one of the 12 vertices on the B12(2-) core. Precursor molecules must also be able to withstand the initial harsh hydrogen peroxide treatment necessary for hydroxylation of the B-H vertices. We report here a method for preparation of the ammonio derivative [closo-B12(OH)11NH3](-) and also demonstrate its utility in construction of a targeted drug delivery scaffold. Treatment of the precursor [closo-B12H11NH3](-) with hydrogen peroxide gives the corresponding nitro derivative [closo-B12(OH)11NO2](2-) in good yield. The nitro group is easily reduced with hydrogen over a Raney nickel catalyst to produce [closo-B12(OH)11NH3](-). The 11 hydroxyl groups can then be readily converted to carbonates or carbamates. As a proof-of-principle of its utility as a drug delivery system, we used the resulting vertex-differentiated ammonio derivative to construct a platinated pro-drug possessing 11 copies of a carboplatin analogue conjugated to the B12(2-) core via carbamate linkage and a fluorescein molecule attached at the remaining vertex by an amide linkage. In vitro cytotoxicity assays demonstrated that activity of an untagged analog was similar to carboplatin against platinum-sensitive A459 cells and higher than carboplatin against platinum-resistant SK-OV-3 cells. Further fluorescence microscopy revealed that the fluorescein-tagged pro-drug localizes to the nuclei of A459 cells.

Novel Synthetic Approach to Charge-Compensated Phosphonio- nido-Carboranes. Synthesis and Structural Characterization of Neutral Mono and Bis(Phosphonio) nido-ortho-Carboranes

A number of monosubstituted n-(triphenylphosphonio)-7,8-dicarba-nido-undecaboranes (2a, n = 1; 2b, n = 3; 2c, n = 5; 2d, n = 9) were prepared via a cross-coupling reaction between the tetrabutylammonium iodo-7,8-dicarba-nido-undecaborates (1a-d) and PPh3 in the presence of a Pd(PPh3)4 catalyst. The substitution rate was found to depend on the iodine position in the carborane cage. Under similar conditions, the reaction of 5,6-diiodo- (3) and 9,11-diiodo-7,8-dicarba-nido-undecaborate (5) anions exclusively yielded the monosubstitution products 5-iodo-6-(triphenylphosphonio)-7,8-dicarba-nido-undecaborane (4) and 9-iodo-11-(triphenylphosphonio)-7,8-dicarba-nido-undecaborane (6), respectively. The reaction of tetrabutylammonium 6,9-diiodo-7,8-dicarba-nido-undecaborate (7) exclusively produced the phosphine substitution product in the open face of the nido-carborane, 6-iodo-9-triphenylphosphonio-7,8-dicarba-nido-undecaborane (8). The addition of a base (Cs2CO3, NaH) to the reactions of 3 and 5 with PPh3 afforded the corresponding bis(triphenylphosphonio)-7,8-dicarba-nido-undecaboranes, 9 and 10. Compound 10 was also prepared from 6 using the general procedure. The reaction of the triiodocarborane tetrabutylammonium 5,6,9-triiodo-7,8-dicarba-nido-undecaborate (11) with excess PPh3 in the presence of Cs2CO3 and Pd(PPh3)4 only produced neutral 5-iodo-6,9-bis(triphenylphosphonio)-7,8-dicarba-nido-undecaborane (12); no positively charged tris(phosphonio) species formed. The compositions of all prepared compounds were determined by multinuclear NMR spectroscopy and high-resolution mass spectrometry. The structures of compounds 2c, 6, 8, 9, and 12 were established by the X-ray diffraction analysis of single crystals.

Acid-Induced Opening of [closo-B10H10]2– as a New Route to 6-Substituted nido-B10H13 Decaboranes and Related Carboranes

Protonation of the polyhedral anion [closo-B(10)H(10)](2-) under superacidic conditions apparently generates an electrophilic intermediate, [B(10)H(13)](+), that forms 6-R-nido-B(10)H(13) (R = aryl, alkyl, triflate) derivatives by electrophilic aromatic substitution, C-H bond activation, or ion-pair collapse, respectively. The proposed mechanism of formation of the 6-R-nido-B(10)H(13) derivatives via the boranocation [B(10)H(13)](+) is discussed. The synthesis of carboranes, starting from 6-R-nido-B(10)H(13) decaboranes, and single-crystal X-ray diffraction analyses of several 6-R-nido-B(10)H(13) decaboranes and carboranes are described.

Tetranuclear copper(I) clusters: impact of bridging carboxylate ligands on solid state structure and photoluminescence

The X-ray crystallographic characterization and solid state photoluminescence (PL) study of three new tetranuclear copper(I) clusters, [Cu4(O2CR)4], R = (3-F)C6H4 (1), (2,3,4-F)3C6H2 (2), and CF3/C6F5 (3), revealed a dependence of PL on the structural type.

Corannulene vs. C60-fullerene in metal binding reactions: A direct DFT and X-ray structural comparison

DFT calculations and X-ray crystallography were used to directly compare the reactivity of the convex carbon surfaces of C20H10-corannulene and the C60-fullerene toward the diruthenium(I,I) metal cluster.