Yunqing Kang

Toxicological Effect of ZnO Nanoparticles Based on Bacteria

Streptococcus agalactiae and Staphylococcus aureus are two pathogenetic agents of several infective diseases in humans. Biocidal effects and cellular internalization of ZnO nanoparticles (NPs) on two bacteria are reported, and ZnO NPs have a good bacteriostasis effect. ZnO NPs were synthesized in the EG aqueous system through the hydrolysis of ionic Zn2+ salts. Particle size and shape were controlled by the addition of the various surfactants. Bactericidal tests were performed in an ordinary broth medium on solid agar plates and in liquid systems with different concentrations of ZnO NPs. The biocidal action of ZnO materials was studied by transmission electron microscopy of bacteria ultrathin sections. The results confirmed that bactericidal cells were damaged after ZnO NPs contacted with them, showing both gram-negative membrane and gram-positive membrane disorganization. The surface modification of ZnO NPs causes an increase in membrane permeability and the cellular internalization of these NPs whereas there is a ZnO NP structure change inside the cells.

Sequential delivery of BMP-2 and IGF-1 using a chitosan gel with gelatin microspheres enhances early osteoblastic differentiation

The purpose of this study was to develop and characterize a chitosan gel/gelatin microsphere (MSs) dual delivery system for sequential release of bone morphogenetic protein-2 (BMP-2) and insulin-like growth factor-1 (IGF-1) to enhance osteoblast differentiation in vitro. We made and characterized the delivery system based on its degree of cross-linking, degradation, and release kinetics. We also evaluated the cytotoxicity of the delivery system and the effect of growth factors on cell response using pre-osteoblast W-20-17 mouse bone marrow stromal cells. IGF-1 was first loaded into MSs, and then the IGF-1-containing MSs were encapsulated into the chitosan gel which contained BMP-2. Cross-linking of gelatin with glyoxal via Schiff bases significantly increased thermal stability and decreased the solubility of the MSs, leading to a significant decrease in the initial release of IGF-1. Encapsulation of the MSs into the chitosan gel generated polyelectrolyte complexes by intermolecular interactions, which further affected the release kinetics of IGF-1. This combinational delivery system provided an initial release of BMP-2 followed by a slow and sustained release of IGF-1. Significantly greater alkaline phosphatase activity was found in W-20-17 cells treated with the sequential delivery system compared with other treatments (P<0.05) after a week of culture.

Osteogenic and angiogenic potentials of monocultured and co-cultured human-bone-marrow-derived mesenchymal stem cells and human-umbilical-vein endothelial cells on three-dimensional porous beta-tricalcium phosphate scaffold.

The use of biodegradable beta-tricalcium phosphate (β-TCP) scaffolds holds great promise for bone tissue engineering. However, the effects of β-TCP on bone and endothelial cells are not fully understood. This study aimed to investigate cell proliferation and differentiation of mono- or co-cultured human-bone-marrow-derived mesenchymal stem cells (hBMSCs) and human-umbilical-vein endothelial cells (HUVECs) on a three-dimensional porous, biodegradable β-TCP scaffold. In co-culture studies, the ratios of hBMSCs:HUVECs were 5:1, 1:1 and 1:5. Cellular morphologies of HUVECs, hBMSCs and co-cultured HUVECs/hBMSCs on the β-TCP scaffolds were monitored using confocal and scanning electron microscopy. Cell proliferation was monitored by measuring the amount of double-stranded DNA (dsDNA) whereas hBMSC and HUVEC differentiation was assessed using the osteogenic and angiogenic markers, alkaline phosphatase (ALP) and PECAM-1 (CD31), respectively. Results show that HUVECs, hBMSCs and hBMSCs/HUVECs adhered to and proliferated well on the β-TCP scaffolds. In monoculture, hBMSCs grew faster than HUVECs on the β-TCP scaffolds after 7 days, but HUVECs reached similar levels of proliferation after 14 days. In monoculture, β-TCP scaffolds promoted ALP activities of both hBMSCs and HUVECs when compared to those grown on tissue culture well plates. ALP activity of cells in co-culture was higher than that of hBMSCs in monoculture. Real-time polymerase chain reaction results indicate that runx2 and alp gene expression in monocultured hBMSCs remained unchanged at days 7 and 14, but alp gene expression was significantly increased in hBMSC co-cultures when the contribution of individual cell types was not distinguished.

Creation of bony microenvironment with CaP and cell-derived ECM to enhance human bone-marrow MSC behavior and delivery of BMP-2.

Extracellular matrix (ECM) comprises a rich meshwork of proteins and proteoglycans, which not only contains biological cues for cell behavior, but is also a reservoir for binding growth factors and controlling their release. Here we aimed to create a suitable bony microenvironment with cell-derived ECM and biodegradable β-tricalcium phosphate (β-TCP). More specifically, we investigated whether the ECM produced by bone marrow-derived mesenchymal stem cells (hBMSC) on a β-TCP scaffold can bind bone morphogenetic protein-2 (BMP-2) and control its release in a sustained manner, and further examined the effect of ECM and the BMP-2 released from ECM on cell behaviors. The ECM was obtained through culturing the hBMSC on a β-TCP porous scaffold and performing decellularization and sterilization. SEM, XPS, FTIR, and immunofluorescent staining results indicated the presence of ECM on the β-TCP and the amount of ECM increased with the incubation time. BMP-2 was loaded onto the β-TCP with and without ECM by immersing the scaffolds in the BMP-2 solution. The loading and release kinetics of the BMP-2 on the β-TCP/ECM were significantly slower than those on the β-TCP. The β-TCP/ECM exhibited a sustained release profile of the BMP-2, which was also affected by the amount of ECM. This is probably because the β-TCP/ECM has different binding mechanisms with BMP-2. The β-TCP/ECM promoted cell proliferation. Furthermore, the BMP-2-loaded β-TCP/ECM stimulated reorganization of the actin cytoskeleton, increased expression of alkaline phosphatase and calcium deposition by the cells compared to those without BMP-2 loading and the β-TCP with BMP-2 loading.

Preparation of PLLA/PLGA microparticles using solution enhanced dispersion by supercritical fluids (SEDS).

In this work, poly(L-lactic acid)/poly(lactide-co-glycolide) (PLLA/PLGA) microparticles were prepared using the technique of solution-enhanced dispersion by supercritical fluids (SEDS). For comparison, separate PLLA and PLGA microparticles were also produced by the same SEDS process. The produced microparticles were characterized by scanning electron microscopy, laser particle size analyzer, X-ray diffraction, differential scanning calorimetry, Fourier transform infrared spectroscopy, and gas chromatography. Results indicate that PLLA/PLGA microparticles possess sphere-like shapes with smooth surfaces. The mean particle size of PLLA/PLGA microparticles ranges from 1.76 to 2.15 microm, depending on the feeding ratio of PLLA to PLGA used in the SEDS process. The crystallinity of PLLA/PLGA microparticles decreases after the SEDS processing, so that the produced microparticles are in an amorphous state. Pure PLGA was hard to precipitate in small, fine microparticle form without the presence of PLLA. A model drug, paclitaxel, was encapsulated into PLLA/PLGA microparticles by the same SEDS process, and the in vitro release rate of paclitaxel from these PLLA/PLGA composites could be modulated by variation of the mixing ratio PLLA:PLGA. The prepared microparticles have negligible residual organic solvent. Drug-loaded PLLA/PLGA microparticles produced by SEDS have potential as an advanced colloidal suspension for pharmaceutical applications.

The osteogenic differentiation of human bone marrow MSCs on HUVEC-derived ECM and β-TCP scaffold.

Extracellular matrix (ECM) serves a key role in cell migration, attachment, and cell development. Here we report that ECM derived from human umbilical vein endothelial cells (HUVEC) promoted osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSC). We first produced an HUVEC-derived ECM on a three-dimensional (3D) beta-tricalcium phosphate (β-TCP) scaffold by HUVEC seeding, incubation, and decellularization. The HUVEC-derived ECM was then characterized by SEM, FTIR, XPS, and immunofluorescence staining. The effect of HUVEC-derived ECM-containing β-TCP scaffold on hMSC osteogenic differentiation was subsequently examined. SEM images indicate a dense matrix layer deposited on the surface of struts and pore walls. FTIR and XPS measurements show the presence of new functional groups (amide and hydroxyl groups) and elements (C and N) in the ECM/β-TCP scaffold when compared to the β-TCP scaffold alone. Immunofluorescence images indicate that high levels of fibronectin and collagen IV and low level of laminin were present on the scaffold. ECM-containing β-TCP scaffolds significantly increased alkaline phosphatase (ALP) specific activity and up-regulated expression of osteogenesis-related genes such as runx2, alkaline phosphatase, osteopontin and osteocalcin in hMSC, compared to β-TCP scaffolds alone. This increased effect was due to the activation of MAPK/ERK signaling pathway since disruption of this pathway using an ERK inhibitor PD98059 results in down-regulation of these osteogenic genes. Cell-derived ECM-containing calcium phosphate scaffolds is a promising osteogenic-promoting bone void filler in bone tissue regeneration.

Preparation, characterization and in vitro cytotoxicity of indomethacin-loaded PLLA/PLGA microparticles using supercritical CO2 technique.

In this work, indomethacin-loaded poly(l-lactic acid)/poly(lactide-co-glycolide) (IDMC-PLLA/PLGA) microparticles were prepared using solution-enhanced dispersion by supercritical fluids (SEDS) technique in an effort to obtain alternative IDMC formulation for drug delivery system. Surface morphology, particle size and particle size distribution, drug encapsulation efficiency, drug release kinetics, in vitro cytotoxicity and the cellular uptake of drug-loaded microparticles were investigated. The drug-loaded microparticles exhibited sphere-like shape and small particle size with narrow particle size distribution. IDMC was amorphously dispersed within the PLLA/PLGA matrix after the SEDS process. In vitro release studies revealed that the drug-loaded microparticles substantially enhanced the dissolution rate of IDMC compared to the free IDMC, and demonstrated a biphasic drug release profile. In vitro cytotoxicity assays indicated that drug-loaded microparticles possessed longer sustained inhibition activity on proliferation of the non-small-cell lung cancer A549 cell lines than did free IDMC. Fluorescence microscopy and transmission electron microscopy identified the phagocytosis of drug-loaded microparticles into the A549 cells and characteristic morphology of cell apoptosis such as the nuclear aberrations, condensation of chromatin, and swelling damage in mitochondria. These results collectively suggested that IDMC-PLLA/PLGA microparticles prepared using SEDS would have potentials in anti-tumor applications as a controlled drug release dosage form without harmful organic solvent residue.

Preparation and properties of Ni-doped ZnO rod arrays from aqueous solution

Ni-doped ZnO rod arrays were successfully prepared on glass substrate from the aqueous solution at a temperature of 80 degrees C. The densities, diameters, and lengths of the rods can easily be well controlled through the concentrations of dopants, and the dopant Ni ions were incorporated into the wurtzite-structure of ZnO crystal. Room temperature photoluminescence spectrum of rod arrays show a strong emission band at 410 nm, and the oxygen deficiencies in ZnO structures were significantly reduced with Ni doped in ZnO rod arrays. The field dependence of magnetization measured at room temperature exhibited the obvious ferromagnetic properties.

Modeling vascularized bone regeneration within a porous biodegradable CaP scaffold loaded with growth factors.

Osteogenetic microenvironment is a complex constitution in which extracellular matrix (ECM) molecules, stem cells and growth factors each interact to direct the coordinate regulation of bone tissue development. Importantly, angiogenesis improvement and revascularization are critical for osteogenesis during bone tissue regeneration processes. In this study, we developed a three-dimensional (3D) multi-scale system model to study cell response to growth factors released from a 3D biodegradable porous calcium phosphate (CaP) scaffold. Our model reconstructed the 3D bone regeneration system and examined the effects of pore size and porosity on bone formation and angiogenesis. The results suggested that scaffold porosity played a more dominant role in affecting bone formation and angiogenesis compared with pore size, while the pore size could be controlled to tailor the growth factor release rate and release fraction. Furthermore, a combination of gradient VEGF with BMP2 and Wnt released from the multi-layer scaffold promoted angiogenesis and bone formation more readily than single growth factors. These results demonstrated that the developed model can be potentially applied to predict vascularized bone regeneration with specific scaffold and growth factors.

Development of Fe3O4-poly(L-lactide) magnetic microparticles in supercritical CO2.

The Fe(3)O(4)-poly(L-lactide) (Fe(3)O(4)-PLLA) magnetic microparticles were successfully prepared in a process of solution-enhanced dispersion by supercritical CO(2) (SEDS), and their morphology, particle size, magnetic mass content, surface atom distribution and magnetic properties were characterized. Indomethacin (Indo) was used as a drug model to produce drug-polymer magnetic composite microparticles. The resulting Fe(3)O(4)-PLLA microparticles with mean size of 803 nm had good magnetic property and a saturation magnetization of 24.99 emu/g. The X-ray photoelectron spectroscopy (XPS) test indicated that most of the Fe(3)O(4) were encapsulated by PLLA, which indicated that the Fe(3)O(4)-PLLA magnetic microparticles had a core-shell structure. After further loading with drug, the Indo-Fe(3)O(4)-PLLA microparticles had a bigger mean size of 901 nm, and the Fourier transform infrared spectrometer (FTIR) analysis demonstrated that the SEDS process was a typical physical coating process to produce drug-polymer magnetic composite microparticles, which is favorable for drugs since there is no change in chemistry. The in vitro cytotoxicity test showed that the Fe(3)O(4)-PLLA magnetic microparticles had no cytotoxicity and were biocompatible, which means there is potential for biomedical application.