Yunrong Wei

High power coherent beam combination from two fiber lasers

Phase locking of two fiber lasers is demonstrated experimentally by the use of a self-imaging resonator with a spatial filter. The high-contrast interference strips of the coherent beam profile are observed. The coherent output power of the fiber array exceeds 12W and the efficiency of coherent power combination is 88% with pump power of 60W. The whole system operates quite stably and, for the spatial filter, no thermal effects have been observed, which means that we can increase the coherent output power further by this method.

Thermal effects in kilowatt all-fiber MOPA

Thermal effects and output power characteristics of kilowatt all-fiber master-oscillator power amplifier (MOPA) are investigated. Proper designs for cooling apparatus are proposed and demonstrated experimentally, for the purpose of minimizing splice heating which is critical for the reliability of high power operation. By using these optimized methods, a thermal damage-free, highly efficient ytterbium-doped double-clad fiber MOPA operating at 1080 nm with 1.17 kW output was obtained. The maximum surface temperature at the pump light launching end splice of the booster amplifier was 345 K, and the temperature rise for this key splice was 0.052 K/W.

Nd:YAG ceramic laser obtained high slope-efficiency of 62% in high power applications

By using quite uniformly nine-stacks side-around arranged compact pumping system, a high power Nd:YAG ceramic quasi-CW laser with high slope efficiency of 62% has been demonstrated. With 450 W quasi-CW stacked laser diode bars pumping at 808 nm, performance of the Nd:YAG ceramic laser with different output coupling mirrors has been investigated. Optimum output power of 236 W at 1064 nm was obtained and corresponding optical-to-optical conversion efficiency was as high as 52.5%. The laser system operated quite stably and no saturation phenomena have been observed, which means higher output laser power could be obtained if injecting higher pumping power. The still-evolving Nd:YAG ceramics are potential super excellent media for high power practical laser applications.

Structural and optical properties of self-assembled InAs/GaAs quantum dots covered by InxGa1−xAs (0⩽x⩽0.3)

Optical and structural investigations of InAs quantum dots (QDs) covered by InxGa1-xAs (0 less than or equal to x less than or equal to 0.3) overgrowth layer have been systematically reported. The decrease of strain in the growth direction of InAs quantum dots covered by InGaAs layer instead of GaAs is demonstrated by transmission electron microscopy experiments. In addition, the atomic force microscopy measurement shows that the surface of InAs islands with 3-nm-thick In0.2Ga0.8As becomes flatter. However, the InGaAs islands nucleate on the top of quantum dots during the process of InAs islands covered with In0.3Ga0.7As. The significant redshift of the photoluminescence peak energy and reduction of photoluminescence linewidth of InAs quantum dots covered by InGaAs are observed. The energy gap change of InAs QDs covered by InGaAs could be explained in terms of reducing strain, suppressing compositional mixing, and increasing island height

Experimental demonstration of phase locking of a two-dimensional fiber laser array using a self-imaging resonator

Phase locking of a two-dimensional fiber laser array is experimentally demonstrated by using a self-imaging resonator and a spatial filter. The stable beam profiles of in-phase mode and out-of-phase mode are observed by controlling the position of spatial filter. The phase locking fiber array with in-phase mode has produced 26 W coherent output. An antisymmetric eigenmode is also observed in our experiments. The phase locking is not sensitive to power variations among the pump beams and the configuration has the ability to repair a missing element

Efficient 532 nm laser using high gray-tracking resistance KTP crystal

A LD end-pumped acoustic-optic Q-switched intracavity frequency-doubled Nd:YVO4 laser was demonstrated. It uses a high gray-tracking resistance KTP crystal as nonlinear optical crystal. The output characteristics of 532 nm green laser using different doping concentrations and cavity configurations were investigated. With the pump power of 27.5 W, a maximum average power of 13 W at 532 nm was achieved at a pulse repetition rate of 80 kHz, corresponding to the optical-to-optical efficiency of 47.3%. The pulse width is 30 ns and single pulse energy is up to 162.5 μJ. This work is a significant exploration for using a high gray-tracking resistance KTP crystal to generate highly efficient frequency-doubled green laser.

Influence of combined InAlAs and InGaAs strain-reducing laser on luminescence properties of InAs/GaAs quantum dots

We have fabricated self-organized InAs/GaAs quantum dots (QDs) capped by 1 nm In0.2Al0.8As and 5 nm In0.2Ga0.8As strain-reducing layer (SRL). The luminescence emission at a long wavelength of 1.33 mum with narrower half width is realized. A wider energy separation between the ground and first excited radiative transitions of up to 102meV was observed at room temperature. Furthermore, the comparative study proves that luminescence properties of InAs/GaAs QDs overgrown with combined InAlAs and InGaAs SRLs are much better than that of one capped with InGaAs or InAlAs SRL

Coherent beam combination of two nanosecond fiber amplifiers by an all-optical feedback loop

A passive coherent beam combination of two nanosecond amplifiers is realized by using an all-optical feedback loop. The width of the combined pulses is 9.7 ns, and the pulse repetition frequency is 2.023 MHz. With the least mismatch between pulse period and time of the cavity round trip in our loop, the visibility of far-field coherent patterns is more than 71%. The dynamics of passive phase locking is studied, and the established time of phase locking of two pulsed amplifiers is at least 10 cavity round trips in the all-optical feedback loop.

Compact continuous-wave blue lasers by direct frequency doubling of laser diodes with periodically poled lithium niobate waveguide crystals

A compact continuous-wave blue laser has been demonstrated by direct frequency doubling of a laser diode with a periodically poled lithium niobate (PPLN) waveguide crystal. The optimum PPLN temperature is near 28 degrees C, and the dependence of waveguide crystals on crystal temperature is less sensitive than that of bulk crystals. A total of 14.8 mW of 488-nm laser power has been achieved.

Selective removal of cobalt binder in surface ablation of tungsten carbide hardmetal with pulsed UV laser

Abstract A novel method using pulsed laser ablation to selectively remove cobalt binder from the surface layer of cemented tungsten carbide hardmetal is proposed in this paper. A 308-nm, 20-ns XeCl excimer laser was used as the light source in this process. The dependence of surface morphology and XRD spectra on laser conditions have been investigated, respectively. The experimental results showed that the microstructure and crystalline structure of the irradiated surface layer varied greatly with laser conditions. After 300 shots of laser irradiation at fluence of 2.5 J/cm2, the surface morphology is characterized by a uniform framework pattern of ‘hills–valleys’. With the increment of laser shots at a laser fluence of 2.5 J/cm2, the microstructure of cemented tungsten carbide was transformed after 300 shots of laser irradiation from the original polygon grains with a size of 3 μm to interlaced large and long grains, and finally, after 700 shots, to gross grains with a size of 10 μm and clear grain boundaries . The crystalline structure of the irradiated area has partly transformed from: the original WC to β-WC1−x; then to α-W2C and CW3; and finally to W crystal. It was demonstrated that, at proper laser fluence and pulse numbers, cobalt binder could be selectively removed from the surface layer of hardmetal.