Yusoff Mohd Amin

The thermoluminescence response of Ge-doped optical fibre subjected to photon irradiation

A radiation dosimeter based on Ge-doped silica fibre is described. Parameters concerning thermoluminescence (TL) induced by 60Co irradiation are investigated, including activation energies, frequency factors, and reproducibility with dose and fading. It is concluded that Ge-doped silica fibres provide a good basis for medical radiation dosimetry at therapy levels. In particular, doses are reproducible to within 3%, the fibres are reusable and show linearity of dose versus TL output over the approximate range of dose 1 Gy to in excess of 100 Gy. At room temperatures, fading within the first 30 d following irradiation has been found to be of the order of 7%.

Investigation of some commercial TLD chips/discs as UV dosimeters

Using a deuterium UV source, we have investigated the response of a number of commercially available thermoluminescence (TL) dosimeters (TLDs) to UV radiation (UVR), including LiF : Mg, Cu, P (TLD-100 H), CaF2 : Dy (TLD-200), CaF2 : Mn (TLD-400), Al2O3 (TLD-500), 7LiF : Mg, Cu, P (TLD-700 H) and CaSO4 : Dy (TLD-900). The intrinsic method was used to detect UVR, while trap depth and frequency factors were estimated using the initial rise method. We have studied TL intensity as a function of exposure time, observing high sensitivity of TLD-500 to UVR. Conversely, TLD-400 displays weak sensitivity to these same radiations. Although TLD-900 and TLD-200 are both less sensitive to UVR than TLD-500, they each provide a linear response to UVR. The possible use of these phosphors as UV dosimeters has been further appraised, examining thermal fading effects and fading due to light exposure.

RADIOMETRIC ANALYSIS OF CONSTRUCTION MATERIALS USING HPGe GAMMA-RAY SPECTROMETRY

Concentrations of primordial radionuclides in common construction materials collected from the south-west coastal region of India were determined using a high-purity germanium gamma-ray spectrometer. Average specific activities (Bq kg(-1)) for (238)U((226)Ra) in cement, brick, soil and stone samples were obtained as 54 ± 13, 21 ± 4, 50 ± 12 and 46 ± 8, respectively. Respective values of (232)Th were obtained as 65 ± 10, 21 ± 3, 58 ± 10 and 57 ± 12. Concentrations of (40)K radionuclide in cement, brick, soil and stone samples were found to be 440 ± 91, 290 ± 20, 380 ± 61 and 432 ± 64, respectively. To evaluate the radiological hazards, radium equivalent activity, various hazard indices, absorbed dose rate and annual effective dose have been calculated, and compared with the literature values. Obtained data could be used as reference information to assess any radiological contamination due to construction materials in future.

UV-VIS and FTIR spectral studies of CR-39 plastics irradiated with X-rays

Abstract A study has been made on the UV-VIS and FTIR spectra of CR-39 plastics irradiated with 50 kVp tube X-rays in the dose range 0ndash;45 MR. The optical transmittance over the wavelength region of 200–1000nm decreases with the X-ray exposure, much greater decrease being observed in the UV region. The IR absorption spectra of the irradiated samples show the presence of two new strong absorption bands at the frequencies 655 and 2340 cm −1 , indicative of the gas CO 2 produced inside the plastic.The absorbance of these bands increases linearly with the X-ray dose.

Soil-to-root vegetable transfer factors for 226Ra, 232Th, 40K, and 88Y in Malaysia

Soil-to-plant transfer factors (TFs) are of fundamental importance in assessing the environmental impact due to the presence of radioactivity in soil and agricultural crops. Tapioca and sweet potato, both root crops, are popular foodstuffs for a significant fraction of the Malaysian population, and result in intake of radionuclides. For the natural field conditions experienced in production of these foodstuffs, TFs and the annual effective dose were evaluated for the natural radionuclides (226)Ra, (232)Th, (40)K, and for the anthropogenic radionuclide (88)Y, the latter being a component of fallout. An experimental tapioca field was developed for study of the time dependence of plant uptake. For soil samples from all study locations other than the experimental field, it has been shown that these contain the artificial radionuclide (88)Y, although the uptake of (88)Y has only been observed in the roots of the plant Manihot esculenta (from which tapioca is derived) grown in mining soil. The estimated TFs for (226)Ra and (232)Th for tapioca and sweet potato are very much higher than that reported by the IAEA. For all study areas, the annual effective dose from ingestion of tapioca and sweet potato are estimated to be lower than the world average (290 μSv y(-1)).

Influence of adsorption parameters on cesium uptake from aqueous solutions- a brief review

Due to rapid population growth, technological advancement and industrial revolution, the rate of generated waste effluents has become a grave concern. Cesium which possesses high fission yield is generally transferred to liquid wastes especially those emanated from the nuclear power plants, reprocessing of spent fuels, nuclear weapon testing and radionuclides production facilities for medical applications etc. Radiocesium (137Cs) is one of the hazardous radionuclides creating adverse effects on human health and environment. Due to its physical (T1/2 = 30.17y) and chemical characteristics (alkalinity, solubility etc.), it can be easily assimilated by the living organisms. As a result, the removal of cesium from wastewater is imperative from the health point of view. Several techniques are implemented but in recent time, adsorption has been gaining increasing attention to the scientific community owing to a number of reasons. Hence, this paper presents an overview on sorption of cesium from wastewaters. Consequently, several critical parameters such as sorption capacity, percentage efficiency and the influence of several factors on cesium uptake by various adsorbents have been reviewed in details.

Radionuclide emissions from a coal-fired power plant

Current study concerns measurement of radioactivity levels in areas surrounding a 2420 MW thermal power plant fueled predominantly by bituminous coal. The concentrations of (226)Ra, (232)Th and (40)K in onsite bottom-ash were found to be 139 Bq/kg, 108 Bq/kg and 291 Bq/kg, respectively, the levels for these radiolnuclides in soil decreasing with distance from the power plant. At the plant perimeter the respective radionuclide concentrations were 87 Bq/kg, 74 Bq/kg and 297 Bq/kg. In a nearby town, the corresponding concentrations were 104 Bq/kg, 52 Bq/kg and 358 Bq/kg, suggestive of use of TENORM affected soils. The mean radium equivalent activities (Raeq) in soil and ash sample in the town were 205 Bq/kg and 316 Bq/kg, respectively. The Kapar plant ash/slag appears to contain a higher level of TENORM than the world average. The degree of contamination is much higher inside the town where slag has been mixed with topsoil as landfill or as simple domestic waste. For the prevailing levels of exposure and a worst case senario, the predicted committed effective dose due to ingestion and inhalation for intake durations of 1- and 30 years would be 4.2 μSv and 220 μSv, respectively.

Synthesis of boron nitride nanotubes via chemical vapour deposition: a comprehensive review

Boron nitride nanotubes (BNNTs) have been synthesized by various methods over the last two decades. Among the various growth techniques, chemical vapor deposition (CVD) is one of the best methods for the synthesis of BNNTs in terms of quality and quantity. It offers relatively easy control of different growth parameters such as growth mechanism, experimental set up, precursor variables, catalyst type and temperature, and hence has become very convenient to grow BNNTs with desired size and morphologies leading to various advanced applications. Here, we present a comprehensive review on BNNT growth by CVD techniques ranging from catalytic to plasma assisted CVD. Moreover, the importance of certain variables for an efficient production of BNNTs, and their effects on the size and morphology of the tubes are also discussed elaborately.

Effective Synthesis of Vertically Aligned Boron Nitride Nanotubes via a Simple CCVD

A simple catalytic chemical vapor deposition technique based on the combined logic of previously synthesized vertically aligned carbon nanotubes and pattern growth of boron nitride nanotubes (BNNTs) along with a few simple modifications in the experimental setup is successfully used for the synthesis of vertically aligned BNNTs. Field emission scanning electron microscope images show the top and side view of the as grown pure BNNTs. High-resolution transmission electron microscope images confirm the tubular structure as well as the highly crystalline nature of the tubes. X-ray photon spectroscopy and Raman spectroscopy indicate h-BN as a main constituent of BNNTs synthesized in the present work.

Synthesis of Boron Nitride Microtubes and Formation of Boron Nitride Nanosheets

Boron nitride microtubes are synthesized in a dual zone quartz tube furnace at 1200°C with ammonia as a reaction atmosphere. Field emission scanning electron microscopy (FE-SEM) results show a unique cone-like morphology of the tubes with larger internal space and thin walls structure. The diameters of the tubes were found to be in the range of 1 to ∼2 µm with the walls thickness estimated to be from 10 to 100 nm. XPS survey shows N 1 s and B 1 s peaks at 398.7 and 191 eV, respectively, that represent h-BN in the sample. Raman spectroscopy indicates a high-intensity peak at 1372.53 (cm−1) that corresponds to the E2g mode of h-BN. Along with the novel tubular morphology of boron nitride microtubes, the present work also explains a mechanism for the formation of boron nitride nanosheets (from boron nitride microtubes) found in the FE-SEM results of the current sample.