Yutang Liu

Amino siloxane oligomer-linked graphene oxide as an efficient adsorbent for removal of Pb(II) from wastewater

A high performance sorbent, oligomer-linked graphene oxide (GO) composite, was prepared through simple cross-linking reactions between GO sheets and poly3-aminopropyltriethoxysilane (PAS) oligomers as crosslinking agents. The three-dimensional PAS oligomers prevented GO sheets from aggregation, provided foreign molecules with easier access, and introduced a large amount of amino functional groups. The morphology, structure and property of the PAS-GO composite were determined by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourie transform infrared (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The adsorption performance of PAS-GO was investigated in removing Pb(II) ions from water. Compared to 3-aminopropyltriethoxysilane functionalized GO (AS-GO) which was prepared by the direct reaction between 3-aminopropyltriethoxysilane and GO, PAS-GO exhibited much higher adsorptivity toward Pb(II) with the maximum adsorption capacity of 312.5mg/g at 303 K and furthermore the maximum adsorption capacity increased with increasing temperature. The adsorption could be conducted in a wide pH range of 4.0-7.0. Importantly, PAS-GO had a priority tendency to adsorb Pb, Cu and Fe from a mixed solution of metal ions, especially from a practical industrial effluent.

Analysis and characterization of cultivable heavy metal-resistant bacterial endophytes isolated from Cd-hyperaccumulator Solanum nigrum L. and their potential use for phytoremediation

This study investigates the heavy metal-resistant bacterial endophytes of Cd-hyperaccumulator Solanum nigrum L. grown on a mine tailing by using cultivation-dependent technique. Thirty Cd-tolerant bacterial endophytes were isolated from roots, stems, and leaves of S. nigrum L. and classified by amplified ribosomal DNA-restriction analysis into 18 different types. Phylogenetic analysis based on 16S rDNA sequences showed that these isolates belonged to four groups: Actinobacteria (43%), Proteobacteria (23%), Bacteroidetes (27%) and Firmicutes (7%). All the isolates were then characterized for their plant growth promoting traits as well as their resistances to different heavy metals; and the actual plant growth promotion and colonization ability were also assessed. Four isolates were re-introduced into S. nigrum L. under Cd stress and resulted in Cd phytotoxicity decrease, as dry weights of roots increased from 55% to 143% and dry weights of above-ground from 64% to 100% compared to the uninoculated ones. The total Cd accumulation of inoculated plants increased from 66% to 135% (roots) and from 22% to 64% (above-ground) compared to the uninoculated ones. Our research suggests that bacterial endophytes are a most promising resource and may be the excellent candidates of bio-inoculants for enhancing the phytoremediation efficiency.

Treatment of landfill leachate using immobilized Phanerochaete chrysosporium loaded with nitrogen-doped TiO2 nanoparticles

This study investigated the performance of immobilized Phanerochaete chrysosporium loaded with nitrogen-doped TiO2 nanoparticles in the treatment of raw landfill leachate with a very low biodegradability ratio (BOD5/COD) of 0.09. The effects of various operating parameters, such as initial chemical oxygen demand (COD) concentration, pH, temperature, and biosorbent dosage, were evaluated with respect to the removal efficiency of total organic carbon (TOC) and ammonia nitrogen (NH3-N). For the immobilized biosorbents, an optimum pH of 6.0 for TOC and 7.0 for NH3-N were found suitable for TOC and NH3-N removal at temperature of 37°C, respectively. The most superior removal efficiencies of TOC and NH3-N of landfill leachate were over 75% and 74% in 72 h at an initial COD concentration of 200 mg L(-1), respectively. In addition, heavy metals were partly removed by the immobilized biosorbents during the process of landfill leachate treatment. The species and mass percentage of organic compounds in landfill leachate after the treatment were found to have considerably declined according to the gas chromatography coupled with mass spectrometry (GC-MS) system. These results indicate that the immobilized P. chrysosporium loaded with nitrogen-doped TiO2 nanoparticles could be a convenient and efficient method for the treatment of landfill leachate.

Monolayer MoS2 with S vacancies from interlayer spacing expanded counterparts for highly efficient electrochemical hydrogen production

It is challenging to prepare monolayer MoS2 with activated basal planes in a simple and efficient way. In this study, an interlayer spacing expanded counterpart, ammonia-intercalated MoS2, was obtained by a simple hydrothermal reaction of ammonium molybdate and elemental sulfur in hydrazine monohydrate solution. Then, the ammonia-intercalated MoS2 could be easily exfoliated by ultrasonication to get monolayer MoS2. Importantly, this monolayer MoS2 possessed rich S vacancies. The produced MoS2 demonstrated a proliferated active site density as well as low-loss electrical transport for efficient electrochemical hydrogen production from water. As expected, the monolayer MoS2 with S vacancies exhibited an excellent electrocatalytic hydrogen evolution reaction performance with a low overpotential (at 10 mA cm−2) of 160 mV (V vs. RHE) in acid media and a small Tafel slope of 54.9 mV dec−1. Furthermore, the catalyst displayed a good long-term stability and chemical stability during the electrochemical hydrogen production process. Computational studies prove that the S vacancies enabled the inert basal planes by introducing localized donor states into the bandgap and lowered the hydrogen adsorption free energy. This study could open new opportunities for the rational design and a better understanding of structure–property relationships of MoS2-based catalysts for water splitting or other applications.

A three-dimensional graphitic carbon nitride belt network for enhanced visible light photocatalytic hydrogen evolution

Three-dimensional (3D) network-like graphitic carbon nitride nanobelts (g-C3N4 NBs) were facilely achieved by the hydrothermal treatment of bulk g-C3N4 in a medium strong oxalic acid solution (1 M, pH 0.89). The positions of the conduction band (CB) and valence band (VB) were upraised from −0.90 and +1.86 eV for bulk g-C3N4 to −0.92 and +1.92 eV for g-C3N4 NB networks with enhanced redox ability, respectively. With an optimized Pt loading of 3%, the g-C3N4 NB networks showed excellent visible-light photocatalytic H2 production activity (1360 μmol g−1 h−1), which was 10.9 times higher than that of optimized 2% Pt@bulk g-C3N4 (124.7 μmol g−1 h−1) using triethanolamine as a sacrificial agent. Furthermore, Pt@g-C3N4 NBs exhibited a considerable rate of H2 evolution of 33.3 μmol g−1 h−1, much higher than 1.79 μmol g−1 h−1 for Pt@bulk g-C3N4 in distilled water without any sacrificial agents, revealing a great potential for photocatalytic overall water splitting. This outstanding performance not only originates from its unique 3D nanostructure and prolonged electron lifetime, but also from the electronic structure modulation and improved redox capacities of the CB and VB. The pH effect of hydrothermal conditions on the g-C3N4 molecular structure, chemical elements, optical properties and catalytic performance is also expounded. This study demonstrates a facile and environmentally friendly strategy to design highly efficient g-C3N4 catalysts for potential applications in solar energy driven photocatalytic water splitting.

A bamboo-inspired hierarchical nanoarchitecture of Ag/CuO/TiO2 nanotube array for highly photocatalytic degradation of 2,4-dinitrophenol

The optimized geometrical configuration of muitiple active materials into hierarchical nanoarchitecture is essential for the creation of photocatalytic degradation system that can mimic natural photosynthesis. A bamboo-like architecture, CuO nanosheets and Ag nanoparticles co-decorated TiO2 nanotube arrays (Ag/CuO/TiO2), was fabricated by using simple solution-immersion and electrodeposition process. Under simulated solar light irradiation, the 2,4-dinitrophenol (2,4-DNP) photocatalytic degradation rate over Ag/CuO/TiO2 was about 2.0, 1.5 and 1.2 times that over TiO2 nanotubes, CuO/TiO2 and Ag/TiO2, respectively. The enhanced photocatalytic activity of ternary Ag/CuO/TiO2 photocatalyst was ascribed to improved light absorption, reduced carrier recombination and more exposed active sites. Moreover, the excellent stability and reliability of the Ag/CuO/TiO2 photocatalyst demonstrated a promising application for organic pollutant removal from water.

Cracked monolayer 1T MoS2 with abundant active sites for enhanced electrocatalytic hydrogen evolution

Molybdenum disulfide (MoS2) is a promising non-precious-metal catalyst, but its performance is limited by its density of active sites and poor electrical transport. Here, we report the design and preparation of cracked monolayer 1T MoS2 with a porous structure through the ultrasonication enhanced lithium intercalation of hydrothermally synthesized MoS2 nanosheets. The unique resulting catalyst can have more active sites introduced via the formation of porosity within the monolayer nanosheet, and the electrical transport ability can be increased through the change in electronic states from semiconducting in the 2H phase to metallic in the 1T phase. As is expected, the cracked monolayer 1T MoS2 exhibited good durability and an excellent hydrogen evolution reaction performance with a low overpotential (at 10 mA cm−2) of 156 mV (V vs. RHE) in acid media and a small Tafel slope of 42.7 mV dec−1. This work will provide an intriguing and effective approach to designing electrocatalysts based on MoS2 or other layered materials with enhanced HER performance.

Fast adsorption of heavy metal ions by waste cotton fabrics based double network hydrogel and influencing factors insight

Massive consumption of cotton fabrics has brought up a serious problem concerning the waste cotton fabrics (WCFs) disposal. It is widely accepted that if WCFs can be reutilized, there will be great business potentials. Herein, we prepared a double network hydrogel based on WCFs and polyacrylamide (Cellulose/PAM DNHs) for heavy metal removal. The DNHs exhibit fast kinetics that sorption equilibrium is achieved in 5min because of the porous and sheet-like laminar structures they possess. The DNHs also illustrate excellent adsorption property and good reusability. The tandem two columns packed with Cellulose/PAM-3 can effectively process simulated and practical wastewater, and the adsorption discrepancy is negligible after three adsorption-desorption cycles. The treatment volumes of simulated wastewater are 172.5 BV (7935mL), 195 BV (8970mL), and 292.5 BV (13455mL) for Cd(II), Cu(II), and Pb(II), respectively. Furthermore, the treatment volumes of practical industrial wastewater reach 42 BV (1932mL) for Cd(II), 63 BV (2898mL) for Cu(II), and 87 BV (4002mL) for Zn(II), Pb(II) and Fe, respectively. This work provides a new avenue for the combination of WCFs reuse and heavy metal removal, which is of great importance to the construction of resource sustainability and environment-friendly society.

MoS2 Quantum Dot Growth Induced by S Vacancies in a ZnIn2S4 Monolayer: Atomic-Level Heterostructure for Photocatalytic Hydrogen Production

It is highly demanded to steer the charge flow in photocatalysts for efficient photocatalytic hydrogen reactions (PHRs). In this study, we developed a smart strategy to position MoS2 quantum dots (QDs) at the S vacancies on a Zn facet in monolayered ZnIn2S4 (Vs-M-ZnIn2S4) to craft a two-dimensional (2D) atomic-level heterostructure (MoS2QDs@Vs-M-ZnIn2S4). The electronic structure calculations indicated that the positive charge density of the Zn atom around the sulfur vacancy (Vs) was more intensive than other Zn atoms. The Vs confined in monolayered ZnIn2S4 established an important link between the electronic manipulation and activities of ZnIn2S4. The Vs acted as electron traps, prevented vertical transmission of electrons, and enriched electrons onto the Zn facet. The Vs-induced atomic-level heterostructure sewed up vacancy structures of Vs-M-ZnIn2S4, resulting in a highly efficient interface with low edge contact resistance. Photogenerated electrons could quickly migrate to MoS2QDs through the intimate Zn-S bond interfaces. As a result, MoS2QDs@Vs-M-ZnIn2S4 showed a high PHR activity of 6.884 mmol g-1 h-1, which was 11 times higher than 0.623 mmol g-1 h-1 for bulk ZnIn2S4, and the apparent quantum efficiency reached as high as 63.87% (420 nm). This work provides a prototype material for looking into the role of vacancies between electronic structures and activities in 2D photocatalytic materials and gives insights into PHR systems at the atomic level.

CdS‐Nanoparticles‐Decorated Perpendicular Hybrid of MoS2 and N‐Doped Graphene Nanosheets for Omnidirectional Enhancement of Photocatalytic Hydrogen Evolution

A new hierarchical nanoarchitecture with integration of multiple active materials has been developed for highly efficient hydrogen evolution reaction (HER), by decorating a perpendicular hybrid of MoS2 and N‐doped graphene nanosheets with CdS nanoparticles. The unique architecture promoted light trapping and absorption for highly efficient light harvesting and photocarrier generation, and offered an unblocked electron transport pathway for rapid charge separation/transport to suppress charge recombination. Its high surface area and high density of active sites result in highly efficient utilization of photogenerated carriers for productive HER. Significantly, without using noble metals as co‐catalysts, the photocatalysts demonstrated rapid HER rates as high as 5.01 mmol h−1 g−1 under visible‐light irradiation, which was approximately 25 times that of pure CdS. The hydrogen production remained stable after a continued test for 30 h, showing an exceedingly high performance and superior stability.