Yuuya Nagata

High-Molecular-Weight Polyquinoxaline-Based Helically Chiral Phosphine (PQXphos) as Chirality-Switchable, Reusable, and Highly Enantioselective Monodentate Ligand in Catalytic Asymmetric Hydrosilylation of Styrenes

A polyquinoxaline-based helical polymer ligand bearing both helical-sense-determining chiral side chains and coordinating diarylphosphino side chains exhibits solvent-dependent formation of P- or M-helical structures, with which either the S- or R-hydrosilylation product was obtained with high (>93% enantiomeric excess) enantioselectivities.

Highly luminescent BODIPY-based organoboron polymer exhibiting supramolecular self-assemble structure.

A novel class of rod-coil type-organoboron polymers with p-phenylene-ethynylene as the rod segment and long alkyl chain (decyl group) as coil segment has been prepared from a Sonogashira-Hagihara coupling reaction of a BODIPY-based monomer having bis-iodophenyl and decyl groups with diyne monomers, 1,4-diethynylbenzene (a), 1,4-diethynyl-2,5-bis(trifluoromethyl)benzene (b), and 2,7-diethynyl-9,9-dihexyl-9H-fluorene (c). The characterization by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the strong tendency of the obtained polymers, 2a, 2b, and 2c, to self-assemble into particles in solution and as-casted films on a micron-nm scale. Especially, 2a showed the presence of nm-sized particles and micron-sized fiber-like structures formed by aggregation of each particle. Further, in CHCl3, the gelation of 2a by three-dimensional aggregation of each fiber was observed at room temperature after 24 h. Their luminescent properties showed high energy transfer efficiency from pi-conjugated polymer linkers to BODIPY moieties (PhiF > 71%).

Highly Intense Fluorescent Diarylboron Diketonate

Diarylboron diketonates were successfully prepared by the reaction of 1,3-diketone derivatives and arylboron compounds such as triphenylborane [BPh3] and fluorobis(pentafluorophenyl)borane diethyl etherate [(C6F5)2BF x OEt2]. The fluorescent emission of their complexes took place depending on the substituent of the arylboron moiety. In particular, a boron 1,3-bis(4-methoxyphenyl)-1,3-diketonate chelated by a strong electron-withdrawing C6F5 group exhibited the most intense fluorescence.

Solid Polymer Films Exhibiting Handedness-Switchable, Full-Color-Tunable Selective Reflection of Circularly Polarized Light

Poly(quinoxaline-2,3-diyl)s bearing (S)-2-methylbutyl, n-butyl, and 8-chlorooctyl groups as side chains were synthesized to fabricate dry solid polymer thin films. These films exhibited selective reflection of right-handed circular polarized light (CPL) in the visible region after annealing in CHCl3 vapor at room temperature. The handedness of reflected CPL was inverted to the left after annealing in 1,2-dichloroethane vapor. It was also found that the color of a particular single film along with the handedness of reflected CPL were fully tuned reversibly, upon exposure of the film to the vapor of various mixtures of chloroform and 1,2-dichloroethane in different ratios.

Catalytic asymmetric synthesis using chirality-switchable helical polymer as a chiral ligand

Single-handed PQXphos, i.e., helical poly(quinoxaline-2,3-diyl)s bearing diarylphosphino pendant groups, served as remarkable chiral ligands in palladium-catalyzed asymmetric hydrosilylation of styrenes and asymmetric biaryl synthesis by Suzuki–Miyaura coupling, affording up to 98 % enantiomeric excess (e.e.) in both reactions. A palladium complex of high-molecular-weight variant (1000mer) of PQXphos could be reused eight times by virtue of the formation of an insoluble polymer complex. PQXphos underwent solvent-dependent inversion of the helical sense, enabling production of either of two enantiomeric products using a single PQXphos.

Poly(quinoxaline-2,3-diyl)s Bearing (S)-3-Octyloxymethyl Side Chains as an Efficient Amplifier of Alkane Solvent Effect Leading to Switch of Main-Chain Helical Chirality

Poly(quinoxaline-2,3-diyl) containing (S)-3-octyloxymethyl side chains was synthesized to investigate the induction of a single-handed helical sense to the main chain in various alkane solvents. The polymer showed an efficient solvent dependent helix inversion between n-octane (M-helix) and cyclooctane (P-helix). After a screening of alkane solvents, it was found that linear alkanes having large molecular aspect ratios induced M-helical structure, and branched or cyclic alkanes having small molecular aspect ratios induced P-helical structure. A polymer ligand containing (S)-3-octyloxymethyl side chains and diphenylphosphino pendants also exhibited solvent-dependent helical inversion between n-octane and cyclooctane, leading to the highly enantioselective production of the both enantiomeric product in a palladium-catalyzed asymmetric hydrosilylation reaction of styrene (R-product 94% ee in n-octane and S-product 90% ee in cyclooctane).

Majority‐Rules‐Type Helical Poly(quinoxaline‐2,3‐diyl)s as Highly Efficient Chirality‐Amplification Systems for Asymmetric Catalysis

A highly efficient majority-rules effect of poly(quinoxaline-2,3-diyl)s (PQXs) bearing 2-butoxymethyl chiral side chains at the 6- and 7-positions was established and attributed to large ΔG(h) values (0.22-0.41 kJ mol(-1)), which are defined as the energy difference between P- and M-helical conformations per chiral unit. A PQX copolymer prepared from a monomer derived from (R)-2-octanol (23% ee) and a monomer bearing a PPh2 group adopted a single-handed helical structure (>99%) and could be used as a highly enantioselective chiral ligand in palladium-catalyzed asymmetric reactions (products formed with up to 94% ee), in which the enantioselectivity could be switched by solvent-dependent inversion of the helical PQX backbone.

Exerting Control over the Helical Chirality in the Main Chain of Sergeants-and-Soldiers-Type Poly(quinoxaline-2,3-diyl)s by Changing from Random to Block Copolymerization Protocols

Chiral random poly(quinoxaline-2,3-diyl) polymers of the sergeants-and-soldiers-type (sergeant units bearing (S)-3-octyloxymethyl groups) adopt an M- or P-helical conformation in the presence of achiral units bearing propoxymethyl or butoxy groups (soldier units), respectively. Unusual bidirectional induction of the helical sense can be observed for a copolymer with butoxy soldier units upon changing the mole fraction of the sergeant units. In the presence of 16-20% of sergeant units, the selective induction of a P-helix was observed, while the selective induction of an M-helix was observed for a mole fraction of sergeant units of more than 60%. This phenomenon could be successfully employed to control the helical chirality of copolymers by applying either random or block copolymerization protocols. Random or block copolymerization of sergeant and soldier monomers in a 18:82 ratio resulted in the formation of 250mers with almost absolute P- or M-helical conformation, respectively (>99% ee). Incorporation of a small amount of coordination sites into the random and block copolymers resulted in chiral macromolecular ligands, which allowed the enantioselective synthesis of both enantiomers in the Pd-catalyzed asymmetric hydrosilylation of β-methylstyrene.

Luminescent alternating boron quinolate–fluorene copolymers exhibiting high electron mobility

π-Conjugated copolymers composed of 9,9-didodecylfluorene and boron quinolate were synthesized by an efficient chelating reaction of quinolinol-based polyfluorene derivative, as a polymeric ligand, with arylborane compounds such as triphenylborane (BPh3) or fluorobis(pentafluorophenyl)borane diethyl etherate ((C6F5)BF·OEt2). The polymeric ligand was prepared from the deprotection reaction of boron tribromide and benzyloxyquinoline-based polyfluorene, which was produced via the efficient Suzuki cross-coupling reaction of 5,7-dibromo-8-benzylquinoline and 9,9-didodecylfluorene-2,7-diboronic acid in the presence of 2-(2′,6′-dimethoxybiphenyl)dicyclohexylphosphine (S-Phos) and palladium(II) acetate. Their optical properties were studied by UV-vis absorption and photoluminescence spectroscopies. The absorption and PL spectra of the obtained polymers were red-shifted in comparison with those of the polymeric ligand due to the decrease of the LUMO level by the formation of boron complexes, explained by theoretical calculations of the model compounds using the density-functional theory (DFT) method. The molar extinction coefficients and emission maxima of boron-chelating polymers were analogous values to those of (κ2-(N,O)-5,7-bis(9,9-dihexylfluoren-2-yl)-8-quinolinolate)diphenylborane (BFluorene2q). Furthermore, the electron mobilities of the polymers were determined from the space-charge limited current (SCLC) with electron-only device structure of ITO/Ca/polymer/LiF/Al. As a result, the mobilities for the polymers (3.9 or 2.0 × 10−5 cm2 V−1 s−1) were reasonably close to the value (7.9 × 10−5 cm2 V−1 s−1) calculated from the Alq3-fabricated device.

Ether solvent-induced chirality inversion of helical poly(quinoxaline-2,3-diyl)s containing L-lactic acid derived side chains

Poly(quinoxaline-2,3-diyl)s containing (S)-1-(alkoxycarbonyl)ethoxymethyl side chains derived from natural L-lactic acid were synthesized to investigate the induction of single-handed helical chirality of the main chain. In ether solvents, the handedness of the helical chirality of the polymer main chain is crucially dependent on the length of the alkyl chain in the lactate alkoxy groups. A polymer bearing pentyl ester groups showed an effective solvent-dependent helix inversion between 1,2-dimethyxyethane (1,2-DME, M-Helix) and tert-butyl methyl ether (MTBE, P-Helix). A single-handed copolymer bearing both the pentyl lactate moieties and diphenylphosphino groups was prepared to use as a chiral ligand in an asymmetric Suzuki–Miyaura coupling reaction. The chirality of the ligand could be inverted by the choice of solvents (1,2-DME or MTBE) resulting in the production of either R- or S-enantiomers with high enantiomeric excesses.