Yuxiao Lai

Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: A general review†

As a bioabsorbable metal with mechanical properties close to bone, pure magnesium or its alloys have great potential to be developed as medical implants for clinical applications. However, great efforts should be made to avoid its fast degradation in vivo for orthopedic applications when used for fracture fixation. Therefore, how to decease degradation rate of pure magnesium or its alloys is one of the focuses in Research and Development (R&D) of medical implants. It has been recognized that surface modification is an effective method to prevent its initial degradation in vivo to maintain its desired mechanical strength. This article reviews the recent progress in surface modifications for prevention of fast degradation of magnesium or its alloys using in vitro testing model, a fast yet relevant model before moving towards time-consuming and expensive in vivo testing. Pros and cons of various surface modifications are also discussed for the goal to design available products to be applied in clinical trials.

Bacterial inhibition potential of 3D rapid-prototyped magnesium-based porous composite scaffolds–an in vitro efficacy study

Bone infections are common in trauma-induced open fractures with bone defects. Therefore, developing anti-infection scaffolds for repairing bone defects is desirable. This study develoepd novel Mg-based porous composite scaffolds with a basal matrix composed of poly(lactic-co-glycolicacid) (PLGA) and tricalcium phosphate (TCP). A unique low-temperature rapid prototyping technology was used to fabricate the scaffolds, including PLGA/TCP (PT), PLGA/TCP/5%Mg (PT5M), PLGA/TCP/10%Mg (PT10M), and PLGA/TCP/15%Mg (PT15M). The bacterial adhesion and biofilm formation of Staphylococcus aureus were evaluated. The results indicated that the Mg-based scaffolds significantly inhibited bacterial adhesion and biofilm formation compared to PT, and the PT10M and PT15M exhibited significantly stronger anti-biofilm ability than PT5M. In vitro degratation tests revealed that the degradation of the Mg-based scaffolds caused an increase of pH, Mg2+ concentration and osmolality, and the increased pH may be one of the major contributing factors to the antibacterial function of the Mg-based scaffolds. Additionally, the PT15M exhibited an inhibitory effect on cell adhesion and proliferation of MC3T3-E1 cells. In conclusion, the PLGA/TCP/Mg scaffolds could inhibit bacterial adhesion and biofilm formation, and the PT10M scaffold was considered to be an effective composition with considerable antibacterial ability and good cytocompatibility.

Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair

Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis. STATEMENT OF SIGNIFICANCE This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.

Src blockage by siRNA inhibits VEGF-induced vascular hyperpemeability and osteoclast activity - an in vitro mechanism study for preventing destructive repair of osteonecrosis.

INTRODUCTION Destructive repair is the pathological feature of ONFH characterized with the elevated vascular permeability and persistent bone resorption, which is associated with higher VEGF expression, activated c-Src, and vascular leakage. Activated c-Src also participates in mediating endothelial permeability and osteoclasts activity. However, the molecular mechanism of the VEGF and c-Src contributing to the destructive repair process remains unknown. The purpose of this study is to delineate the role of VEGF and c-Src in triggering destructive repair of osteonecrosis in vitro, as well as to elucidate if VEGF mediating vascular permeability and osteoclastic bone resorption are Src dependent. METHODS We employed pharmacological VEGF to induce higher endothelial permeability and osteoclasts activity for simulating related pathological features of destructive repair in vitro. Src specific pp60(c-src)siRNA was used for determining the contribution of VEGF and Src to destructive repair. The primary endothelial cells and osteoclasts were treated with 50ng/ml VEGF and/or transfected with the pp60(c-src)siRNA, while equivalent PBS and non-targeting siRNA were treated in the control groups. RESULTS VEGF enhanced Src bioactivity through promoting dephosphorylation of Src at Y527 and phosphorylation of Src at Y416. Meanwhile, Src specific pp60(c-src)siRNA significantly reduced Src expression in both cells. VEGF destroyed the junctional integrity of endothelial cells resulting in higher endothelial permeability. However, Src blockade significantly relieved VEGF induced actin stress and inhibited caveolae and VVOs formation, meanwhile further stabilized the complex β-catenin/VE-cadherin/Flk-1 through decreasing phosphorylation of VE-cadherin, ultimately decreasing VEGF-mediating higher vascular permeability. In addition, VEGF promoted osteoclasts formation and function without affecting the adhesion activity and cytoskeleton. We further found that Src blockade significantly impaired cytoskeleton resulting in a lower adhesion activity through down-regulation of phosphorylation of Src, Pyk2 and Cbl, and ultimately inhibited osteoclasts formation and function. CONCLUSIONS These findings provide a new insight into VEGF and c-Src mode of reaction in triggering destructive repair of osteonecrosis and further indicate that VEGF mediating vascular permeability and osteoclasts activity are Src-dependent. Blockade of Src may have great potential as an effective therapy targeting destructive repair in osteonecrosis.

Review of various treatment options and potential therapies for osteonecrosis of the femoral head

Summary Size and location of the lesion, subchondral collapse occurrence, and articular cartilage involvement are general disease progression criteria for direct osteonecrosis of the femoral head (ONFH) classifications. Treatment options for ONFH are usually based on individual factors and lesion characteristics. Although spontaneous repair of ONFH occurs in some cases, untreated ONFH is unlikely to escape the fate of subchondral collapse and usually ends up with total hip arthroplasty. Operations to preserve the femoral head, e.g., core decompression and bone grafting, are usually recommended in younger patients. They are helpful to relieve pain and improve function in the affected femoral head without subchondral collapse, however, poor prognosis after surgical procedures remains the major problem for ONFH. Pharmacological and physical therapies only work in the early stage of ONFH and have also been recommended as a supplement or prevention treatment for osteonecrosis. Following advances in basic science, many new insights focus on bone tissue engineering to optimize therapies and facilitate prognosis of ONFH. In this review, disease classifications, current treatment options, potential therapies, and the relevant translational barriers are reviewed in the context of clinical application and preclinical exploration, which would provide guidance for preferable treatment options and translation into novel therapies.

The RAPIDOS project—European and Chinese collaborative research on biomaterials

Summary The research project entitled “rapid prototyping of custom-made bone-forming tissue engineering constructs” (RAPIDOS) is one of the three unique projects that are the result of the first coordinated call for research proposals in biomaterials launched by the European Union Commission and the National Natural Science Foundation of China in 2013 for facilitating bilateral translational research. We formed the RAPIDOS European and Chinese consortium with the aim of applying technologies creating custom-made tissue engineered constructs made of resorbable polymer and calcium phosphate ceramic composites specifically designed by integrating the following: (1) imaging and information technologies, (2) biomaterials and process engineering, and (3) biological and biomedical engineering for novel and truly translational bone repair solutions. Advanced solid free form fabrication technologies, precise stereolithography, and low-temperature rapid prototyping provide the necessary control to create innovative high-resolution medical implants. The use of Chinese medicine extracts, such as the bone anabolic factor icaritin, which has been shown to promote osteogenic differentiation of stem cells and enhance bone healing in vivo, is a safe and technologically relevant alternative to the intensely debated growth factors delivery strategies. This unique initiative driven by a global consortium is expected to accelerate scientific progress in the important field of biomaterials and to foster strong scientific cooperation between China and Europe.

Quantitative determination of residual 1,4-dioxane in three-dimensional printed bone scaffold

Summary Background/Objective A novel porous scaffold poly (lactide-co-glycolide) and tricalcium phosphate (PLGA/TCP) was developed by three-dimensional printing technology for bone defect repair. As a Class 2 solvent with less severe toxicity, content of residual 1,4-dioxane in this newly developed scaffold should be rigorously controlled when it is translated to clinical use. In this study, a headspace gas chromatography-mass spectrometric (HS-GC-MS) method and related testing protocol were developed for quantitative determination of 1,4-dioxane in the PLGA/TCP composite scaffolds. Methods Matrix effect analysis was used to optimise the pretreatment method of the scaffolds. Then, the procedure for testing 1,4-dioxane using HS-GC-MS was set up. The accuracy, precision, and robustness of this newly developed quantitative method were also validated before quantification of 1,4-dioxane in the scaffolds with different drying procedures. Results Dimethyl formamide (DMF) was the optimal solvent for dissolving scaffolds for GC-MS with proper sensitivity and without matrix effect. Then, the optimised procedure was determined as: the scaffolds were dissolved in DMF and kept at 90°C for 40 minutes, separated on a HP-5MS column, and detected by mass spectroscopy. Recovery experiments gave 97.9–100.7% recovery for 1,4-dioxane. The linear range for 1,4-dioxane was determined as 1–40 ppm with linear correlation coefficient ≥ 0.9999. Intraday and interday precision was determined as being within relative standard deviation of below 0.68%. The passable drying procedure was related to lyophilising (−50°C, 50 Pa) the scaffolds for 2 days and drying in vacuum (50 Pa) for 7 days. Conclusion This is the first quantitative method established to test 1,4-dixoane in a novel scaffold. This method was validated with good accuracy and reproducibility, and met the methodological requirements of the Guideline 9101 documented in the Chinese Pharmacopoeia 2015 Edition. The translational potential of this article This quantitative method for determination of residual 1,4-dioxane in the novel scaffolds is a key technical method during its translation into clinical use because this method is an important and indispensable file in the enterprise standard when the porous scaffold is registered as a Class III implanted medical device for bone defect repair, which is used to guarantee the safety of the scaffolds. It is also applied to optimise the drying process of scaffolds and to monitor the quality of scaffolds in the industrialisation process. Further, this method provides references for other solvents quantitative determination in porous scaffolds or materials.

Study in Treatment of Collagen-Induced Arthritis in DBA/1 Mice Model by Genistein

BACKGROUND This work aimed to evaluate the effects of genistein treatment in Collagen Induced Arthritis (CIA) mouse model. METHODS CIA was elicited in DBA/1 Mice by an intradermal injection of 100 μL of an emulsion of bovine type II collagen (CII) in isovolumic incomplete Freunds adjuvant (IFA) at the base of the tail. Twenty-one days later, a second injection of CII in IFA was administered at the base of the tail. After the symptoms of arthritis showed in mouse model, we divided animals into two groups according to their clinical symptom scores. The treatment group was intraperitoneally injected daily with genistein (based on the pre-experiment data and literature reported, 5 mg/kg dose was selected and tested) for 12 days, while the control group was injected with phosphate buffered saline. Inflammatory cytokines titer, radiological, and histological observations were completed at different times points after treatment. CT analysis was conducted 3 months after the treatment to observe the articular structures. Immunohistochemical analysis was performed to investigate the expression and distribution of VEGF in joint tissues. RESULTS Genistein suppressed the expressions of IL-1β, IL-6 and TNF-α in the serum. Radiological results showed that bone degradation was inhibited by the treatment. Moreover, hematoxylin and eosin staining showed that the degree of inflammation was relieved. In the cartilage area, TRAP stain-positive cells were detected, which was notably reduced in the treatment group compared to the control group. Micro-CT 3D images clearly exhibited that the joint adhered and structures destroyed in the control group with less destruction in the treatment group. Furthermore, genistein suppressed VEGF expression, and blocked angiogenesis in the synovial tissue. CONCLUSION Our work provides further data regarding the effects of genistein as a potential treatment drug for RA, as well as the role of genistein in the anti-inflammatory pathway in RA therapy.

‘Old drugs for new applications’: can orthopedic research benefit from this strategy?

New drug exploration is difficult in a clinical setting and the development of new drugs may be costly and time consuming. With further research into the pathological mechanisms and etiology of diseases as well as the rapid development of biological techniques, many ‘old drugs’ that have been applied in clinics may have new therapeutic functions which may shed light on clinical management. Based on this, we have investigated the ‘old drugs for new applications’ strategy in pharmacology which may be less expensive and more efficient in the clinical setting. In this paper we have explored and illustrated the potential applications of ‘old drugs’ for the treatment of orthopedic diseases, especially in arthritis and osteoporosis therapy.

Use of a three-dimensional printed polylactide-coglycolide/tricalcium phosphate composite scaffold incorporating magnesium powder to enhance bone defect repair in rabbits

Background The repair of large bone defects remains challenging for orthopaedic surgeons. Bone grafting remains the method of choice; such grafts fill spaces and enhance bone repair. Therapeutic agents also aid bone healing. The objective of this study is to develop a composite bioactive scaffold composed of polylactide-coglycolide (PLGA) and tricalcium phosphate (TCP) (the basic carrier) incorporating osteogenic, bioactive magnesium metal powder (Mg). Method Porous PLGA/TCP scaffolds incorporating Mg were fabricated using a low-temperature rapid-prototyping process. We term the PLGA/TCP/Mg porous scaffold (hereafter, PPS). PLGA/TCP lacking Mg served as the control material when evaluating the efficacy of PPS. A total of 36 New Zealand white rabbits were randomly divided into blank, PLGA/TCP (P/T) and PPS group, with 12 rabbits in each group. We established bone defects 15 mm in length in rabbit radii to evaluate the in vivo osteogenic potential of the bioactive scaffold in terms of the direct controlled release of osteogenic Mg ion during in vivo scaffold degradation. Radiographs of the operated radii were taken immediately after implantation and then at 2, 4, 8 and 12 weeks. Micro-computed tomography of new bone formation and remaining scaffold and histological analysis were performed at 4, 8, 12 weeks after operation. Results X-ray imaging performed at weeks 4, 8 and 12 post-surgery revealed more newly formed bone within defects implanted with PPS and PLGA/TCP scaffolds than blank group (p < 0.05). And micro-computed tomography performed at weeks 4 and 8 after surgery revealed more newly formed bone within defects implanted with PPS scaffolds than PLGA/TCP scaffolds (p < 0.05). Histologically, the PPS group had more newly mineralized bone than controls (p < 0.05). The increases in new bone areas (total implant regions) in the PPS and PLGA/TCP groups were 19.42% and 5.67% at week 4 and 48.23% and 28.93% at week 8, respectively. The percentages of remaining scaffold material in total implant regions in the PPS and PLGA/TCP groups were 53.30% and 7.65% at week 8 and 20.52% and 2.70% at week 12, respectively. Conclusion Our new PPS composite scaffold may be an excellent orthopaedic substitute; it exhibits good biocompatibility and may potentially have clinical utility. Translational potential of this article Magnesium and beta-tricalcium phosphate had osteoinduction. It is significant to print a novel bone composite scaffold with osteoinduction to repair segmental bone defects. This study evaluated efficacy of PPS in the rabbit radius segmental bone defect model. The results showed that the novel scaffold with good biocompatibility may be an excellent graft and potentially have clinical utility.