Yvonne Henskens

Mean Platelet Volume as a Diagnostic Marker for Cardiovascular Disease: Drawbacks of Preanalytical Conditions and Measuring Techniques

After the first description of platelets more than a century ago, the knowledge about their origin and function grew continuously. The development of the impedance method as a completely automated assay allowed integrating mean platelet volume (MPV) measurement as a routine parameter of the complete blood count. This enabled us to focus more on the association of platelet function and size. Since then, many authors described MPV as a marker of platelet reactivity and risk factor for cardiovascular diseases. Hence, the preanalytical variability of this parameter is known from its introduction as standard laboratory value. Unfortunately no preanalytical standards have been implemented. This review shows the high variability in the literature with MPV as a risk factor for cardiovascular disease. After a brief description of the biology of platelets, we provide an in-depth survey of the measurement methods and their drawbacks. Finally, we propose a possible approach to standardization.

A high-throughput sequencing test for diagnosing inherited bleeding, thrombotic, and platelet disorders

Inherited bleeding, thrombotic, and platelet disorders (BPDs) are diseases that affect ∼300 individuals per million births. With the exception of hemophilia and von Willebrand disease patients, a molecular analysis for patients with a BPD is often unavailable. Many specialized tests are usually required to reach a putative diagnosis and they are typically performed in a step-wise manner to control costs. This approach causes delays and a conclusive molecular diagnosis is often never reached, which can compromise treatment and impede rapid identification of affected relatives. To address this unmet diagnostic need, we designed a high-throughput sequencing platform targeting 63 genes relevant for BPDs. The platform can call single nucleotide variants, short insertions/deletions, and large copy number variants (though not inversions) which are subjected to automated filtering for diagnostic prioritization, resulting in an average of 5.34 candidate variants per individual. We sequenced 159 and 137 samples, respectively, from cases with and without previously known causal variants. Among the latter group, 61 cases had clinical and laboratory phenotypes indicative of a particular molecular etiology, whereas the remainder had an a priori highly uncertain etiology. All previously detected variants were recapitulated and, when the etiology was suspected but unknown or uncertain, a molecular diagnosis was reached in 56 of 61 and only 8 of 76 cases, respectively. The latter category highlights the need for further research into novel causes of BPDs. The ThromboGenomics platform thus provides an affordable DNA-based test to diagnose patients suspected of having a known inherited BPD.

Obstetric hemorrhage and coagulation: an update. Thromboelastography, thromboelastometry, and conventional coagulation tests in the diagnosis and prediction of postpartum hemorrhage.

Globally, postpartum hemorrhage (PPH) is the leading cause of maternal morbidity and mortality. In the current treatment of severe PPH, first-line therapy includes transfusion of packed cells and fresh-frozen plasma in addition to uterotonic medical management and surgical interventions. In persistent PPH, tranexamic acid, fibrinogen, and coagulation factors are often administered. Secondary coagulopathy due to PPH or its treatment is often underestimated and therefore remains untreated, potentially causing progression to even more severe PPH. In most cases, medical and transfusion therapy is not based on the actual coagulation state because conventional laboratory test results are usually not available for 45 to 60 minutes. Thromboelastography and rotational thromboelastometry are point-of-care coagulation tests. A good correlation has been shown between thromboelastometric and conventional coagulation tests, and the use of these in massive bleeding in nonobstetric patients is widely practiced and it has been proven to be cost-effective. As with conventional laboratory tests, there is an influence of fluid dilution on coagulation test results, which is more pronounced with colloid fluids. Fibrinogen seems to play a major role in the course of PPH and can be an early predictor of the severity of PPH. The FIBTEM values (in thromboelastometry, reagent specific for the fibrin polymerization process) decline even more rapidly than fibrinogen levels and can be useful for early guidance of interventions. Data on thromboelastography and thromboelastometry in pregnant women are limited, particularly during the peripartum period and in women with PPH, so more research in this field is needed. Target Audience: Obstetricians & Gynecologists, Family Physicians Learning Objectives: After participating in this CME activity, physicians should be better able to manage postpartum hemorrhage and to evaluate the possible uses of thromboelastography and thromboelastometry to treat obstetric hemorrhage.

Peri-partum reference ranges for ROTEM® thromboelastometry

BACKGROUND Post-partum haemorrhage (PPH) causes rapidly developing deficiencies in clotting factors and contributes to substantial maternal morbidity and mortality. Rotational thromboelastometry (ROTEM(®)) is increasingly used as a point of care coagulation monitoring device in patients with massive haemorrhage; however, there are limited data on reference ranges in the peri-partum period. These are required due to the haemostatic changes in pregnancy. METHODS In a Dutch multi-centre trial, 161 subjects were included; blood samples were obtained during labour (T1) and within 1 h of delivery (T2). Reference ranges of ROTEM(®) INTEM, EXTEM, FIBTEM, and APTEM were set and correlation with laboratory results was investigated using the guidelines of the International Federation of Clinical Chemistry. RESULTS Reference ranges were obtained for clotting time (CT), clot formation time (CFT), α-angle, clot firmness at 10 and 20 min (A10, A20), maximum clot firmness (MCF), and maximum lysis (ML). These were comparable from centre to centre, and between T1 and T2. Reference ranges T1: EXTEM: CT 31-63 s, CFT 41-120 s, and MCF 42-78 mm. INTEM CT 109-225 s, CFT 40-103, and MCF 63-78 mm. FIBTEM CT 31-79 s and MCF 13-45 mm. APTEM CT 33-62 s, CFT 42-118, and MCF 61-79 mm. CONCLUSIONS Reference values for ROTEM(®) parameters are reported. The previously published correlation between FIBTEM parameters and plasma fibrinogen levels by the Clauss method is confirmed. Further research is needed to define threshold values for haemostatic therapy in the course of PPH. Clinical trial registration NTR 2515 (http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=2515).

Rapid and correct prediction of thrombocytopenia and hypofibrinogenemia with rotational thromboelastometry in cardiac surgery.

OBJECTIVES In the present study, the authors have investigated whether rotational thromboelastometry (ROTEM) could predict thrombocytopenia and hypofibrinogenemia in cardiac surgery using the clot amplitude after 5 minutes (A5). Another parameter, PLTEM, in which the contribution of fibrinogen is eliminated by subtracting a fibrin-specific ROTEM test (FIBTEM) from an extrinsically-activated ROTEM test (EXTEM), was investigated. Furthermore, the turnaround time of ROTEM was compared to conventional laboratory tests. DESIGN Prospective cohort study. SETTING Single academic medical center. PARTICIPANTS Ninety-seven patients undergoing cardiac surgery between July 2011 until August 2012. INTERVENTIONS The correlations between EXTEM/FIBTEM A5, A10, and maximal clot formation (MCF), EXTEM/PLTEM (A5/A10, and MCF) and platelet count, and FIBTEM (A5/A10, and MCF) and fibrinogen were evaluated using the Pearsons correlation coefficient and receiver-operating characteristic curves. Turnaround times of ROTEM tests and conventional laboratory tests were assessed in the central laboratory. MEASUREMENTS AND MAIN RESULTS EXTEM A5 and FIBTEM A5 showed an excellent correlation with A10 (R:0.99/1.00) and MCF (R:0.97/0.99). The correlation between EXTEM A5 and platelet count (R:0.74) was comparable with the correlation of A10 (R:0.73) and MCF (R:0.70) with platelet count. FIBTEM A5 predicted fibrinogen levels (R:0.87) as well as A10 (R:0.86) and MCF (R:0.87). PLTEM A5 (R:0.85) correlated better with platelet count than EXTEM A5 (R:0.74; p = 0.04) and showed significantly better area under the curve values than EXTEM for predicting thrombocytopenia (A5 p = 0.012, A10 p = 0.019). Turnaround time for ROTEM tests, 12 minutes, was comparable with emergency requests for platelet count, 13 minutes, and shorter than emergency requests for fibrinogen levels, 37 minutes. CONCLUSIONS Implementation of PLTEM and FIBTEM A5 in ROTEM-guided transfusion protocols may improve transfusion management.

Thrombin Generation Capacity of Prothrombin Complex Concentrate in an In Vitro Dilutional Model

Background The use of PCC for the treatment of trauma-induced coagulopathy potentially increase the risk of thromboembolism and disseminated intravascular coagulation, which is addressed to an imbalance of both pro- and anticoagulants. As PCCs differ in composition, we used an in vitro dilutional approach to assess the overall thrombin generation of five different PCCs through various laboratory assays. Methods The vitamin K-dependent coagulation factors, heparin, and antithrombin were assessed in five commercially available PCCs. The procoagulant potential of the PCCs was assessed in plasma and whole blood from 4 healthy donors by means of classical coagulation assays, thrombin generation assay and thromboelastometry. In order to reflect coagulopathy, whole blood was diluted to 80, 60, 40, and 20% with Ringer’s lactate solution. Results The five different PCCs were characterised by comparable levels of factors II, VII, IX and X (all around 20–30 IU/mL), whereas the heparin (0 to 17.6 IU/mL) and antithrombin (0.06 to 1.29 IU/mL) levels were remarkably different between manufactures. In vitro dilution of blood induced a prolongation of the PT and aPTT, and attenuation of thrombin generation and ExTem induced thromboelastometry. Overall, non- or low-heparin containing PCCs restored the in vitro dilutional coagulopathy, whereas PCCs containing heparin have an anticoagulant effect. The thrombin generation assay showed to be the most sensitive method for assessment of PCC effects. Conclusions This study shows that most available PCCs are not balanced regarding their pro- and anticoagulants. The effect of measured differences in thrombin generation among different PCCs requires further investigations to elaborate the clinical meaning of this finding in the treatment of trauma induced coagulopathy.

Cirrhosis patients have a coagulopathy that is associated with decreased clot formation capacity

The coagulopathy in cirrhosis is associated with thrombosis and bleeding.

Development of novel membranes for blood purification therapies based on copolymers of N-vinylpyrrolidone and n-butylmethacrylate

Developments in membrane based blood purification therapies often come with longer treatment times and therefore longer blood-material contact, which requires long-term membrane biocompatibility. In this study, we develop for the first time membranes for blood purification using the material SlipSkin™, which is a copolymer, made from N-vinylpyrrolidone (NVP) and butylmethacrylate (BMA). Specific attention is focused on understanding the mechanism of pore formation and the tailoring of the membrane mechanical and transport properties to obtain the optimal membrane for blood purification therapies. Polymer composition, solvent type and solvent evaporation time influence membrane morphology and membranes with sieving properties of cascade filters in plasma fractionation applications are developed. The new membranes have very good blood compatibility properties; in fact compared to benchmark flat membranes currently used in the clinic, they have lower platelet adhesion while all other properties (contact activation, thrombogenicity, leukocyte adhesion, hemolysis and complement activation) are also very good and comparable to the benchmarks.

Coated platelets function in platelet-dependent fibrin formation via integrin αIIbβ3 and transglutaminase factor XIII

Coated platelets, formed by collagen and thrombin activation, have been characterized in different ways: i) by the formation of a protein coat of α-granular proteins; ii) by exposure of procoagulant phosphatidylserine; or iii) by high fibrinogen binding. Yet, their functional role has remained unclear. Here we used a novel transglutaminase probe, Rhod-A14, to identify a subpopulation of platelets with a cross-linked protein coat, and compared this with other platelet subpopulations using a panel of functional assays. Platelet stimulation with convulxin/thrombin resulted in initial integrin αIIbβ3 activation, the appearance of a platelet population with high fibrinogen binding, (independently of active integrins, but dependent on the presence of thrombin) followed by phosphatidylserine exposure and binding of coagulation factors Va and Xa. A subpopulation of phosphatidylserine-exposing platelets bound Rhod-A14 both in suspension and in thrombi generated on a collagen surface. In suspension, high fibrinogen and Rhod-A14 binding were antagonized by combined inhibition of transglutaminase activity and integrin αIIbβ3. Markedly, in thrombi from mice deficient in transglutaminase factor XIII, platelet-driven fibrin formation and Rhod-A14 binding were abolished by blockage of integrin αIIbβ3. Vice versa, star-like fibrin formation from platelets of a patient with deficiency in αIIbβ3 (Glanzmann thrombasthenia) was abolished upon blockage of transglutaminase activity. We conclude that coated platelets, with initial αIIbβ3 activation and high fibrinogen binding, form a subpopulation of phosphatidylserine-exposing platelets, and function in platelet-dependent star-like fibrin fiber formation via transglutaminase factor XIII and integrin αIIbβ3.

Platelet Control of Fibrin Distribution and Microelasticity in Thrombus Formation Under Flow

Objective— Platelet- and fibrin-dependent thrombus formation is regulated by blood flow and exposure of collagen and tissue factor. However, interactions between these blood-borne and vascular components are not well understood. Approach and Results— Here, we developed a method to assess whole-blood thrombus formation on microspots with defined amounts of collagen and tissue factor, allowing determination of the mechanical properties and intrathrombus composition. Confining the collagen content resulted in diminished platelet deposition and fibrin formation at high shear flow conditions, but this effect was compensated by a larger thrombus size and increased accumulation of fibrin in the luminal regions of the thrombi at the expense of the base regions. These thrombi were more dependent on tissue factor–triggered thrombin generation. Microforce nanoindentation analysis revealed a significantly increased microelasticity of thrombi with luminal-oriented fibrin. At a low shear rate, fibrin fibers tended to luminally cover the thrombi, again resulting in a higher microelasticity. Studies with blood from patients with distinct hemostatic insufficiencies indicated an impairment in the formation of a platelet–fibrin thrombus in the cases of dilutional coagulopathy, thrombocytopenia, Scott syndrome, and hemophilia B. Conclusions— Taken together, our data indicate that (1) thrombin increases the platelet thrombus volume; (2) tissue factor drives the formation of fibrin outside of the platelet thrombus; (3) limitation of platelet adhesion redirects fibrin from bottom to top of the thrombus; (4) a lower shear rate promotes thrombus coverage with fibrin; (5) the fibrin distribution pattern determines thrombus microelasticity; and (6) the thrombus-forming process is reduced in patients with diverse hemostatic defects.