Yvonne Tze Fung Tan

Effect of carbopol and polyvinylpyrrolidone on the mechanical, rheological, and release properties of bioadhesive polyethylene glycol gels

This study examined the mechanical (hardness, compressibility, adhesiveness, and cohesiveness) and rheological (zero-rate viscosity and thixotropy) properties of polyethylene glycol (PEG) gels that contain different ratios of Carbopol 934P (CP) and polyvinylpyrrolidone K90 (PVP). Mechanical properties were examined using a texture analyzer (TA-XT2), and rheological properties were examined using a rheometer (Rheomat 115A). In addition, lidocaine release from gels was evaluated using a release apparatus simulating the buccal condition. The results indicated that an increase in CP concentration significantly increased gel compressibility, hardness, and adhesiveness, factors that affect ease of gel removal from container, ease of gel application onto mucosal membrane, and gel bioadhesion. However, CP concentration was negatively correlated with gel cohesiveness, a factor representing structural reformation. In contrast, PVP concentration as negatively correlated with gel hardness and compressibility, but positively correlated with gel cohesiveness. All PEG gels exhibited pseudoplastic flow with thixotropy, indicating a general loss of consistency with increased shearing stress. Drug release T50% was affected by the flow rate of the simulated saliva solution. A reduction in the flow rate caused a slower drug release and hence a higher T50% value. In addition, drug release was significantly reduced as the concentrations of CP and PVP increased because of the increase in zero-rate viscosity of the gels. Response surfaces and contour plots of the dependent variables further substantiated that various combinations of CP and PVP in the PEG gels offered a wide range of mechanical, rheological, and drug-release characteristics. A combination of CP and PVP with complementary physical properties resulted in a prolonged buccal drug delivery.

Solubility of Core Materials in Aqueous Polymeric Solution Effect on Microencapsulation of Curcumin

Curcumin, the main active constituent of turmeric herb (Curcuma longa L.) have been reported to possess many medicinal values. The application of curcumin in dermatological preparations is limited by their intense yellow color property, which stains the fabric and skin. The objectives of this study were to reduce the color staining effect and enhance the stability of curcumin via microencapsulation using gelatin simple coacervation method. As for curcumin, ethanol and acetone were used as coacervating solvents. Curcumin was dispersed in ethanol while dissolved in acetone. Irrespective of the types of coacervating solvents used, microencapsulation resolved the color-staining problem and enhanced the flow properties and photo-stability of curcumin. Nevertheless, it was found that more spherical curcumin microcapsules with higher yield, higher curcumin loading, and higher entrapment efficiency were obtained with acetone than ethanol. The in vitro release of curcumin after microencapsulation was slightly prolonged. Further evaluation of the effects of solubility of core materials in coacervating solvent or polymeric aqueous solution using six different drug compounds, namely, ketoconazole, ketoprofen, magnesium stearate, pseudoephedrine HCl, diclofenac sodium, and paracetamol, suggested that the solubility of core materials in aqueous polymeric solution determined the successful formation of microcapsules. Microcapsules could only be formed if the core materials were not dissolved in the aqueous polymeric solution while the core materials could either be dissolved or dispersed in the coacervating solvent. In summary, microencapsulation not only circumvents the color-staining problem but also improved the stability and flowability of curcumin. The solubility of core material in aqueous polymeric solution plays a pivotal role in determining the successful formation of microcapsules.

Rehydrated sterically stabilized phospholipid nanomicelles of budesonide for nebulization: physicochemical characterization and in vitro, in vivo evaluations

Background Inhaled corticosteroids provide unique systems for local treatment of asthma or chronic obstructive pulmonary disease. However, the use of poorly soluble drugs for nebulization has been inadequate, and many patients rely on large doses to achieve optimal control of their disease. Theoretically, nanotechnology with a sustained-release formulation may provide a favorable therapeutic index. The aim of this study was to determine the feasibility of using sterically stabilized phospholipid nanomicelles of budesonide for pulmonary delivery via nebulization. Methods PEG5000-DSPE polymeric micelles containing budesonide (BUD-SSMs) were prepared by the coprecipitation and reconstitution method, and the physicochemical and pharmacodynamic characteristics of BUD-SSMs were investigated. Results The optimal concentration of solubilized budesonide at 5 mM PEG5000-DSPE was 605.71 ± 6.38 μg/mL, with a single-sized peak population determined by photon correlation spectroscopy and a particle size distribution of 21.51 ± 1.5 nm. The zeta potential of BUD-SSMs was −28.43 ± 1.98 mV. The percent entrapment efficiency, percent yield, and percent drug loading of the lyophilized formulations were 100.13% ± 1.09%, 97.98% ± 1.95%, and 2.01% ± 0.02%, respectively. Budesonide was found to be amorphous by differential scanning calorimetry, and had no chemical interaction with PEGylated polymer according to Fourier transform infrared spectroscopy. Transmission electron microscopic images of BUD-SSMs revealed spherical nanoparticles. BUD-SSMs exhibited prolonged dissolution behavior compared with Pulmicort Respules® (P < 0.05). Aerodynamic characteristics indicated significantly higher deposition in the lungs compared with Pulmicort Respules®. The mass median aerodynamic, geometric standard deviation, percent emitted dose, and the fine particle fraction were 2.83 ± 0.08 μm, 2.33 ± 0.04 μm, 59.13% ± 0.19%, and 52.31% ± 0.25%, respectively. Intratracheal administration of BUD-SSMs 23 hours before challenge (1 mg/kg) in an asthmatic/chronic obstructive pulmonary disease rat model led to a significant reduction in inflammatory cell counts (76.94 ± 5.11) in bronchoalveolar lavage fluid compared with administration of Pulmicort Respules® (25.06 ± 6.91). Conclusion The BUD-SSMs system might be advantageous for asthma or chronic obstructive pulmonary disease and other inflammatory airway diseases.

Effect of polymer, plasticizer and filler on orally disintegrating film

Abstract Context: Difficulty in swallowing tablets or capsules has been identified as one of the contributing factors to non-compliance of geriatric patients. Although orally disintegrating tablet was designed for fast disintegration in mouth, the fear of taking solid tablets and the risk of choking for certain patient populations still exist. Objective: The objective of this study was to develop and characterize orally disintegrating film (ODF), which was prepared using different combinations of polymers, plasticizers and fillers. Materials and methods: Effects of hydroxypropyl methylcellulose (HPMC), polyethylene glycol 400 (PEG 400), glycerin, polyvinyl pyrrolidone (PVP), mannitol and microcrystalline cellulose (MCC) on physical property of ODF formed were studied. The ODF was prepared using the solvent casting method. Results: Increase in HPMC concentration formed ODF with greater tensile strength. Incorporation of plasticizer (PEG 400 and glycerin) reduced tensile strength but increased elasticity of the ODF formed. PVP increased both tensile strength and elasticity of the ODF. Increase in MCC:mannitol ratio reduced the tensile strength and elasticity of the ODF. Disintegration time of film decreased corresponding to decrease in tensile strength of the film. Formulation R with the optimum tensile strength (13.10 N/mm2), bending flexibility (40 times) and disintegration time (41.50 s) was chosen as final formulation. A total of 80% of the drug was released within five minutes and the ODF was stable at least for one year actual condition. Conclusion: An ODF containing donepezil HCl was developed and characterized. The donepezil HCl ODF has the potential to improve the compliance of Alzheimer disease patients.

Solubilization of beclomethasone dipropionate in sterically stabilized phospholipid nanomicelles (SSMs): physicochemical and in vitro evaluations

Background The local treatment of lung disorders such as asthma and chronic obstructive pulmonary disease via pulmonary drug delivery offers many advantages over oral or intravenous routes of administration. This is because direct deposition of a drug at the diseased site increases local drug concentrations, which improves the pulmonary receptor occupancy and reduces the overall dose required, therefore reducing the side effects that result from high drug doses. From a clinical point of view, although jet nebulizers have been used for aerosol delivery of water-soluble compounds and micronized suspensions, their use with hydrophobic drugs has been inadequate. Aim: To evaluate the feasibility of sterically stabilized phospholipid nanomicelles (SSMs) loaded with beclomethasone dipropionate (BDP) as a carrier for pulmonary delivery. Methods 1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxy-poly(ethylene glycol 5000) polymeric micelles containing BDP (BDP-SSMs) were prepared by the coprecipitation and reconstitution method, and the physicochemical and in vitro characteristics of BDP-SSMs were investigated. Results BDP-SSMs were successfully prepared with a content uniformity and reproducibility suitable for pulmonary administration. The maximum solubility of BDP in SSMs was approximately 1300 times its actual solubility. The particle size and zeta potential of BDP-SSMs were 19.89 ± 0.67 nm and −28.03 ± 2.05 mV, respectively. The SSMs system slowed down the release of BDP and all of the aerodynamic values of the aerosolized rehydrated BDP-SSMs were not only acceptable but indicated a significant level of deposition in the lungs. Conclusion The SSM system might be an effective way of improving the therapeutic index of nebulized, poorly soluble corticosteroids.

Direct effect of khat and garlic extracts on blood lipids contents: Preliminary in vitro study

SUMMARY Khat (Catha edulis) as well as garlic (Allium sativum) has a potential effect on reducing the lipid contents of blood. However, a mechanism by which garlic or khat reduces plasma lipids has not been fully investigated. This study aimed to investigate the direct action of khat and/or garlic (in vitro). The effects of extracted khat and/or garlic on human blood constituents (cholesterol and triglycerides) and on vegetable oil were investigated. The results showed that aqueous garlic extract was able to form an emulsion with oil but not khat extract. Even though, either khat or garlic extract has slight effect on reducing lipid contents of blood; a higher reduction was obtained when the extracts were added in combination. The mechanism of garlic on reducing lipids could be explained by its emulsifying property, while the mechanism of khat is by lipolysis. In conclusion, the synergistic effect of garlic and khat extracts opened an interesting area for further investigation on their roles in combating cardiovascular and obesity disorders.:

Effect of HPMC concentration on β-cyclodextrin solubilization of norfloxacin

The effect of hydroxypropyl methylcellulose (HPMC) concentration on β-cyclodextrin (β-CD) solubilization of norfloxacin was examined. The solubility and dissolution of norfloxacin/β-CD and norfloxacin/β-CD/HPMC inclusion complexes were studied. The presence of β-CD increased significantly the solubility and dissolution of norfloxacin. The addition of HPMC until 5% (w/w) improved the solubilization of norfloxacin but further addition above 5% (w/w), decreased norfloxacin solubilization. Fourier transformed Infra-red (FTIR) showed that norfloxacin was successfully included into β-CD. Differential scanning calorimetry (DSC) showed that the norfloxacin endothermic peak shifted to a lower temperature with reduced intensity indicating the formation of inclusion complex. The addition of HPMC reduced further the intensity of norfloxacin endothermic peak. Most of the sharp and intense peaks of norfloxacin disappeared with the addition of HPMC. In conclusion, the concentration of hydrophilic polymer used to enhance β-CD solubilization of poorly soluble drugs is very critical.

Extraction and Microencapsulation of Khat: Effects on Sexual Motivation and Estradiol Level in Female Rats

INTRODUCTION Khat (Catha edulis) is an evergreen tree/shrub that is thought to affect sexual motivation or libido. Its positive effect on sexual desire is more frequently observed in females than in males and occurs when khat is chewed. Thus, khats effects on sexual behavior may depend on the release mode of its active constituent. AIM This study aimed to investigate the effect of dried khat alkaloids on the sexual motivation and estradiol levels of female rats, with special emphasis on the importance of the sustained release effect. METHODS Dried khat leaves were extracted and isolated. The alkaloids in khat extract were identified and calculated using thin layer chromatography and high-performance liquid chromatography. The isolated khat extract was microencapsulated using a phase separation coacervation method. The morphology, particle size, yield, drug loading, and entrapment efficiency were evaluated. The in vitro release and stability of alkaloids in khat extract and in khat extract microcapsules were determined. The effect of khat extract microcapsules and varying doses of khat extract on sexual motivation in female rats were investigated. Additionally, estradiol levels, vaginal secretions and vaginal pH were determined. MAIN OUTCOME MEASURES The differences in the effect of khat extract and khat extract microcapsules on sexual motivation, vaginal secretion and estradiol levels in female rats were compared. Results. Cathine and norephedrine were identified in the isolated khat extract at composition of 81.3% and 17.2%, respectively. Among the formulations studied, khat extract microcapsules of formulation 2:3:5 (containing a ratio of khat extract to ovalbumin to gelatin of 2:3:5) were found to exhibit higher yield, loading, and entrapment efficiency. Khat extract microcapsules showed sustained in vitro release and were more stable than khat extract. In addition, khat extract microcapsules enhanced sexual motivation, increased vaginal secretions, and upregulated estradiol level in female rats. CONCLUSION The sustained release of alkaloids from dried khat has significantly enhanced the sexual motivation and increased the estradiol level of female rats. Thus the release of dried khat alkaloids from microcapsules might be an effective means of enhancing the libido in females.

Incorporation of Beclomethasone Dipropionate into Polyethylene Glycol‐Diacyl Lipid Micelles as a Pulmonary Delivery System

Strategy, Management and Health Policy Enabling Technology, Genomics, Proteomics Preclinical Research Preclinical Development Toxicology, Formulation Drug Delivery, Pharmacokinetics Clinical Development Phases I‐III Regulatory, Quality, Manufacturing Postmarketing Phase IV

Simultaneous quantification of sildenafil and N-desmethyl sildenafil in human plasma by UFLC coupled with ESI-MS/MS and pharmacokinetic and bioequivalence studies in Malay population

A simple, rapid, specific and reliable UFLC coupled with ESI-MSMS assay method to simultaneously quantify sildenafil and N-desmethyl sildenafil, with loperamide as internal standard, was developed. Chromatographic separation was performed on a Thermo Scientific Accucore C18 column with an isocratic mobile phase composed of 0.1% v/v formic acid in purified water-methanol (20:80, v/v), at a flow rate of 0.3 mL/min. Sildenafil, N-desmethyl sildenafil and loperamide were detected with proton adducts at m/z 475.4 > 58.2, 461.3 > 85.2 and 477.0 > 266.1 in multiple reaction monitoring positive mode, respectively. Both analytes and internal standard were extracted by diethyl ether. The method was validated over a linear concentration range of 10-800 ng/mL for sildenafil and 10-600 ng/mL for N-desmethyl sildenafil with correlation coefficient (r(2) ) ≥0.9976 for sildenafil and (r(2) ) ≥0.9992 for N-desmethyl sildenafil. The method was precise, accurate and stable. The proposed method was applied to study the bioequivalence between a 100 mg dose of two pharmaceutical products: Viagra (original) and Edyfil (generic) products. AUC0-t , Cmax and Tmax were 2285.79 ng h/mL, 726.10 ng/mL and 0.94 h for Viagra and 2363.25 ng h/mL, 713.91 ng/mL and 0.83 hour for Edyfil. The 90% confidence interval of these parameters of this study fall within the regulatory range of 80-125%, hence they are considered as bioequivalent.