Zdenko Spitalsky

High volume fraction carbon nanotube?epoxy composites

A versatile processing technique for fabricating epoxy nanocomposites with a high weight fraction of oxidized multi-walled carbon nanotubes is presented. Thin carbon nanotube based preforms were prepared through an oxidation-filtration protocol and then immersed in a pre-polymerized epoxy/curing agent solution in acetone. By adjusting the conditions for the oxidation of carbon nanotubes and the epoxy concentration in the as-prepared solution, high loading of graphitic nanostructures was obtained. Tensile tests indicated that the elastic modulus and strength of certain composites prepared by in situ polymerization as above were improved by 100% and 60%, respectively, compared to neat epoxy. In addition, the composite sheets showed comparable electrical conductivity values to the neat carbon nanotube paper. These results suggest that targeted chemical modification of the carbon nanotube surface is an effective way to enhance the electrical and mechanical properties of carbon nanotube-polymer composites.

Electrical transport properties of poly(aniline-co-p-phenylenediamine) and its composites with incorporated silver particles

Statistical copolymers of aniline and p-phenylenediamine, poly(aniline-co-p-phenylenediamine)s, were synthesised by oxidative polymerisation using various oxidants, ammonium peroxydisulphate or silver nitrate. Depending on the choice of oxidant, copolymers or composites with silver particles were obtained. Different molar concentrations of p-phenylenediamine in the reaction mixture provided materials of different conductivities. The influence of both the copolymer composition and the presence of discrete silver particles on the electric and dielectric properties of the system was studied. The results showed a decrease in the conductivity of copolymers and their composites with the silver content compared with the content of standard polyaniline salt. The reduction in conductivity was described in terms of the decreased density of hopping centres due to defects in the copolymer structure. The dielectric relaxations observed were described in terms of their activation energies and were linked to the corresponding conduction mechanism.

Fast low-temperature plasma reduction of monolayer graphene oxide at atmospheric pressure

We report on an ultrafast plasma-based graphene oxide reduction method superior to conventional vacuum thermal annealing and/or chemical reduction. The method is based on the effect of non-equilibrium atmospheric-pressure plasma generated by the diffuse coplanar surface barrier discharge in proximity of the graphene oxide layer. As the reduction time is in the order of seconds, the presented method is applicable to the large-scale production of reduced graphene oxide layers. The short reduction times are achieved by the high-volume power density of plasma, which is of the order of 100 W cm-3. Monolayers of graphene oxide on silicon substrate were prepared by a modified Langmuir-Schaefer method and the efficient and rapid reduction by methane and/or hydrogen plasma was demonstrated. The best results were obtained for the graphene oxide reduction in hydrogen plasma, as verified by x-ray photoelectron spectroscopy and Raman spectroscopy.

Ambient light induced antibacterial action of curcumin/graphene nanomesh hybrids

Curcumin and its derivates are well-known for their different biological activities including antibacterial. On the other hand there are controversial reports concerning the antibacterial potential of graphene and, in particular, graphene oxide. In this study we have reported for the first time the antibacterial activity of curcumin/graphene nanomesh hybrids under ambient light conditions. The graphene nanomesh was synthesized by electrochemical exfoliation of highly oriented pyrolytic graphite in 1 M solution of ammonium persulfate and further functionalized by curcumin. Identical values of minimum inhibitory concentration (1 mg mL−1) were determined for pure curcumin and curcumin/graphene nanomesh hybrids toward Staphylococcus aureus. All tested samples had more pronounced antibacterial activity against Gram positive bacteria, Staphylococcus aureus compared to Escherichia coli as a representative of Gram negative strains. The poor antibacterial potential of exfoliated graphene improves significantly by the functionalization with curcumin, which allows for its usage as a antibacterial coating.