Zehui Cao

Molecular Engineering of DNA: Molecular Beacons

Molecular beacons (MBs) are specifically designed DNA hairpin structures that are widely used as fluorescent probes. Applications of MBs range from genetic screening, biosensor development, biochip construction, and the detection of single-nucleotide polymorphisms to mRNA monitoring in living cells. The inherent signal-transduction mechanism of MBs enables the analysis of target oligonucleotides without the separation of unbound probes. The MB stem-loop structure holds the fluorescence-donor and fluorescence-acceptor moieties in close proximity to one another, which results in resonant energy transfer. A spontaneous conformation change occurs upon hybridization to separate the two moieties and restore the fluorescence of the donor. Recent research has focused on the improvement of probe composition, intracellular gene quantitation, protein-DNA interaction studies, and protein recognition.

Cell-Specific Aptamer Probes for Membrane Protein Elucidation in Cancer Cells

Disease biomarkers play critical roles in the management of various pathological conditions of diseases. This involves diagnosing diseases, predicting disease progression and monitoring the efficacy of treatment modalities. While efforts to identify specific disease biomarkers using a variety of technologies has increased the number of biomarkers or augmented information about them, the effective use of disease-specific biomarkers is still scarce. Here, we report that a high expression of protein tyrosine kinase 7 (PTK7), a transmembrane receptor protein tyrosine kinase-like molecule, was discovered in a series of leukemia cell lines using whole cell aptamer selection. With the implementation of a two-step strategy (aptamer selection and biomarker discovery), combined with mass spectrometry, PTK7 was ultimately identified as a potential biomarker for T-cell acute lymphoblastic leukemia (T-ALL). Specifically, the aptamers for T-ALL cells were selected using the cell-SELEX process, without any prior knowledge of the cell biomarker population, conjugated with magnetic beads and then used to capture and purify their binding targets on the leukemia cell surface. This demonstrates that a panel of molecular aptamers can be easily generated for a specific type of diseased cells. It further demonstrates that this two-step strategy, that is, first selecting cancer cell-specific aptamers and then identifying their binding target proteins, has major clinical implications in that the technique promises to substantially improve the overall effectiveness of biomarker discovery. Specifically, our strategy will enable efficient discovery of new malignancy-related biomarkers, facilitate the development of diagnostic tools and therapeutic approaches to cancer, and markedly improve our understanding of cancer biology.

General Peroxidase Activity of G-Quadruplex−Hemin Complexes and Its Application in Ligand Screening

DNA sequences with repetitive G-rich structural motifs, which form special structures called G-quadruplexes, widely exist in the human genome. Here we report the general peroxidase activity of G-quadruplex-hemin complexes and discuss the connection between peroxidase activity and G-quadruplex structures. The high peroxidase activity of hemin complexed with intramolecular parallel G-quadruplex-forming sequences in gene promoters (such as c-Myc, VEGF, c-Kit21, HIF-1alpha, and RET) may imply a potential mechanism of hemin-mediated cellular injury. This peroxidase activity has also been demonstrated to be applicable for screening G-quadruplex ligands (potential anticancer reagents) using colorimetric and visual detection strategies.

Molecular assembly for high-performance bivalent nucleic acid inhibitor

It is theorized that multivalent interaction can result in better affinity and selectivity than monovalent interaction in the design of high-performance ligands. Accordingly, biomolecular engineers are increasingly taking advantage of multivalent interactions to fabricate novel molecular assemblies, resulting in new functions for ligands or enhanced performance of existing ligands. Substantial efforts have been expended in using small molecules or epitopes of antibodies for designing multifunctional or better-performing ligands. However, few attempts to use nucleic acid aptamers as functional domains have been reported. In this study, we explore the design of bivalent nucleic acid ligands by using thrombin and its aptamers as the model by which to evaluate its functions. By assembling two thrombin-binding aptamers with optimized design parameters, this assembly has resulted in the successful development of a nucleic acid-based high-performance bivalent protein inhibitor. Our experimentation proved (i) that the simultaneous binding of two aptamers after linkage achieved 16.6-fold better inhibition efficiency than binding of the monovalent ligand and (ii) that such an improvement originated from changes in the kinetics of the binding interactions, with a koff rate ≈1/50 as fast. In addition, the newly generated aptamer assembly is an excellent anticoagulant reagent when tested with different samples. Because this optimized ligand design offers a simple and noninvasive means of accomplishing higher performance from known functional aptamers, it holds promise as a potent antithrombin agent in the treatment of various diseases related to abnormal thrombin activities.

Single-DNA Molecule Nanomotor Regulated by Photons

We report the design of a single-molecule nanomotor driven by photons. The nanomotor is a DNA hairpin-structured molecule incorporated with azobenzene moieties to facilitate reversible photocontrollable switching. Upon repeated UV-vis irradiation, this nanomotor displayed 40-50% open-close conversion efficiency. This type of nanomotor displays well-regulated responses and can be operated under mild conditions with no output of waste. In contrast to multiple-component DNA nanomachines, the intramolecular interaction in this single-molecule system offers unique concentration-independent motor functionality. Moreover, the hairpin structure of the motor backbone can significantly improve the efficiency of light-to-movement energy conversion. These results suggest that azobenzene-incorporated, hairpin-structured single-molecule DNA nanomotors have promising potential for applications which require highly efficient light-driven molecular motors.

Conservative secondary structure motif of streptavidin-binding aptamers generated by different laboratories

Aptamers that are selected in vitro from random pools of DNA or RNA molecules by SELEX (Systematic evolution of ligands by exponential enrichment) technique have been extensively explored for analytical and biomedical applications. Although many aptamers with high affinity and specificity against specific ligands have been reported, there is still a lack of well characterized DNA aptamers. Here we report the selection of a group of aptamer candidates (85 mer) against streptavidin. Through comparing the predicted secondary structures of all the candidates, a conservative bulge-hairpin structure section (about 29 mer) was found, and then it was determined to be the binding motif to streptavidin. This binding motif was further discovered to also exist in streptavidin-binding aptamers (SBAs) selected by three other laboratories using different methods. The primary sequences of this secondary structure motif are very different, only several nucleotides in the loop and bulge area are critical for binding and other nucleotides are variable. The streptavidin binding of all the SBAs could be competed by biotin implying that they bind to the same site on streptavidin. These results suggest that the evolution of SBA is predominated by specific groups on streptavidin. The highly variable sequence composition of streptavidin-binding aptamer would make the design of aptameric sensor or device based on streptavidin more flexible and easy.

Characterization of G‐Quadruplex/Hemin Peroxidase: Substrate Specificity and Inactivation Kinetics

Recently, G-quadruplex/hemin (G4/hemin) complexes have been found to exhibit peroxidase activity, and this feature has been extensively exploited for colorimetric detection of various targets. To further understand and characterize this important DNAzyme, its substrate specificity, inactivation mechanism, and kinetics have been examined by comparison with horseradish peroxidase (HRP). G4/hemin DNAzyme exhibits broader substrate specificity and much higher inactivation rate than HRP because of the exposure of the catalytic hemin center. The inactivation of G4/hemin DNAzyme is mainly attributed to the degradation of hemin by H(2)O(2) rather than the destruction of G4. Both the inactivation rate and catalytic oxidation rate of G4/hemin DNAzyme depend on the concentration of H(2)O(2), which suggests that active intermediates formed by G4/hemin and H(2)O(2) are the branch point of catalysis and inactivation. Reducing substrates greatly inhibit the inactivation of G4/hemin DNAzyme by rapidly reacting with the active intermediates. A possible catalytic and inactivation process of G4/hemin has been proposed. These results imply a potential cause for the hemin-mediated cellular injury and provide insightful information for the future application of G4/hemin DNAzyme.

A Cyanine Dye to Probe Mitophagy: Simultaneous Detection of Mitochondria and Autolysosomes in Live Cells

Mitophagy is a process in which cells remove dysfunctional mitochondria and recycle their constituents in a lysosome-dependent manner. To probe this process, two different fluorescent dyes specific for mitochondria and lysosomes, respectively, are often used in combination. However, current fluorescent dyes for lysosomes cannot distinguish mitochondria-containing autolysosomes from other lysosomes. Therefore, we herein report a cyanine dye, HQO, which can simultaneously probe mitochondria and autolysosomes in live cells by exhibiting different fluorescence properties. HQO selectively accumulates in mitochondria but then transforms to the protonated HQOH(+) form with the decrease of pH when dysfunctional mitochondria evolve into autolysosomes. Since HQO and HQOH(+) exhibit different absorption and emission with Ex/Em at 530/650 and 710/750 nm, respectively, in a low polarity environment, such as that found in micelles, they are uniquely suited to monitor mitophagy with the ability to distinguish autolysosomes from other lysosomes.

Bifunctional combined aptamer for simultaneous separation and detection of thrombin.

Here we report on the construction and evaluation of a bifunctional combined aptamer (BCA) that consists of a DNA streptavidin-binding aptamer (SBA), a DNA thrombin-binding aptamer (TBA) and a fluorophore. The BCA adopts a new conformation that is very different from simply linking the conformations of the two individual aptamers together, so that it does not bind to streptavidin in the absence of thrombin. Binding of this novel DNA aptamer to streptavidin is triggered by the thrombin binding and depends on the concentration of thrombin. Meanwhile, fluorescence from the streptavidin captured BCA reflects the quantity of the target molecule in the sample. This aptamer combination strategy based on the SBA holds good potential for applications in simultaneous detection and separation of targets of aptamers or certain DNA and RNA targets.

Activity Enhancement of G-Quadruplex/Hemin DNAzyme by Flanking d(CCC)

G-quadruplex (G4)/hemin DNAzymes have been extensively applied in bioanalysis and molecular devices. However, their catalytic activity is still much lower than that of proteinous enzymes. The G4/hemin DNAzyme activity is correlated with the G4 conformations and the solution conditions. However, little is known about the effect of the flanking sequences on the activity, though they are important parts of G4s. Here, we report sequences containing d(CCC), flanked on both ends of the G4-core sequences remarkably enhance their DNAzyme activity. By using circular dichroism and UV-visible spectroscopy, the d(CCC) flanking sequences were demonstrated to improve the hemin binding affinity to G4s instead of increasing the parallel G4 formation, which might explain the enhanced DNAzyme activity. Meanwhile, the increased hemin binding ability promoted the degradation of hemin within the DNAzyme by H2O2. Furthermore, the DNAzyme with d(CCC) flanking sequences showed strong tolerance to pH value changes, which makes it more suitable for applications requiring wide pH conditions. The results highlight the influence of the flanking sequences on the DNAzyme activity and provide insightful information for the design of highly active DNAzymes.