Zeynep Altinbas

Status of head-on beam-beam compensation in RHIC

In polarized proton operation, the performance of the Relativistic Heavy Ion Collider (RHIC) is limited by the head-on beam-beam effect. To overcome this limitation, two electron lenses are under commissioning. We give an overview of head-on beam-beam compensation in general and in the specific design for RHIC, which is based on electron lenses. The status of installation and commissioning are presented along with plans for the future.

Record Performance of SRF Gun with CsK2Sb Photocathode

High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray and gamma-ray sources, high luminosity hadron colliders, nuclearwaste transmutation or a new generation of microchip production. In this paper we report on our operation of a superconducting RF electron gun with a record-high accelerating gradient at the CsK2Sb photocathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (i.e., 2 nC). We briefly describe the system and then detail our experimental results. INTRODUCTION The coherent electron cooling experiment (CeC PoP) [1, 2] is expected to demonstrate cooling of a single hadron bunch in RHIC. A superconducting RF gun operating at 112 MHz frequencies generates the electron beam. 500MHz normal conducting cavities provide energy chirp for ballistic compression of the beam. 704-MHz superconducting cavity will accelerate beam to the final energy. The electron beam merges with the hadron beam and after cooling process is steered to a dump. The FEL-like structure enhances the electron-hadron interaction. The electron beam parameters are shown in the Table 1. Table 1: Parameters of the Electron Beam

Circular beam scanning power system for isotope production upgrade

To increase the production of medical isotopes, an upgrade to the Brookhaven Linac Isotope Producer (BLIP) facility is now being designed and constructed. Currently, the ion beam strikes the isotope producing target in a single spot. With this upgrade, the ion beam will be directed to hit the target in circular patterns, distributing the heat of collision over a bigger area on the target. The power system to create the circular patterns requires orthogonal dipole magnets with sinusoidal currents which are ninety degrees apart from each other. This paper describes the design concept for powering the magnets and the control system that produces the correct waveforms despite component variations.