Zhandong Wang

Determination of absolute photoionization cross‐sections of alkanes and cyclo‐alkanes

Absolute photoionization and dissociative photoionization cross-sections of eleven n-alkanes (n-pentane, n-hexane, n-heptane, n-nonane, n-decane, n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentadecane and n-hexadecane), three cyclo-alkanes (cyclopentane, methylcyclohexane and trans-decahydronaphthalene) and iso-octane were measured for photon energies from the ionization thresholds to 11.5 eV. The measurements were performed with the binary-liquid-mixture method utilizing the photoionization cross-sections of benzene as a calibration standard. The ionization energies of n-alkanes and cyclo-alkanes were also calculated at the B3P86/6-31 + +G(d,p) level and by the G3B3 method.

Study of the Low Temperature Oxidation of Propane

The low-temperature oxidation of propane was investigated using a jet-stirred reactor at atmospheric pressure and two methods of analysis: gas chromatography and synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) with direct sampling through a molecular jet. The second method allowed the identification of products, such as molecules with hydroperoxy functions, which are not stable enough to be detected by gas chromatography. Mole fractions of the reactants and reaction products were measured as a function of the temperature (530-730 K), with a particular attention to reaction products involved in the low temperature oxidation, such as cyclic ethers, aldehydes, alcohols, ketones, and hydroperoxides. A new model has been obtained from an automatically generated one, which was used as a starting point, with a large number of re-estimated thermochemical and kinetic data. The kinetic data of the most sensitive reactions, i.e., isomerizations of alkylperoxy radicals and the subsequent decompositions, have been calculated at the CBS-QB3 level of theory. The model allows a satisfactory prediction of the experimental data. A flow rate analysis has allowed highlighting the important reaction channels.

Products from the oxidation of linear isomers of hexene.

The experimental study of the oxidation of the three linear isomers of hexene was performed in a quartz isothermal jet-stirred reactor (JSR) at temperatures ranging from 500 to 1100 K including the negative temperature coefficient (NTC) zone, at quasi-atmospheric pressure (1.07 bar), at a residence time of 2 s and with dilute stoichiometric mixtures. The fuel and reaction product mole fractions were measured using online gas chromatography. In the case of 1-hexene, the JSR has also been coupled through a molecular-beam sampling system to a reflectron time-of-flight mass spectrometer combined with tunable synchrotron vacuum ultraviolet photoionization. A difference of reactivity between the three fuels, which varies with the temperature range has been observed and is discussed according to the changes in the possible reaction pathways when the double bond is displaced. An enhanced importance of the reactions via the Waddington mechanism and of those of allylic radicals with HO2 radicals can be noted for 2- and 3-hexenes compared to 1-hexene.

Modeling Ignition of a Heptane Isomer: Improved Thermodynamics, Reaction Pathways, Kinetics, and Rate Rule Optimizations for 2-Methylhexane

Accurate chemical kinetic combustion models of lightly branched alkanes (e.g., 2-methylalkanes) are important to investigate the combustion behavior of real fuels. Improving the fidelity of existing kinetic models is a necessity, as new experiments and advanced theories show inaccuracies in certain portions of the models. This study focuses on updating thermodynamic data and the kinetic reaction mechanism for a gasoline surrogate component, 2-methylhexane, based on recently published thermodynamic group values and rate rules derived from quantum calculations and experiments. Alternative pathways for the isomerization of peroxy-alkylhydroperoxide (OOQOOH) radicals are also investigated. The effects of these updates are compared against new high-pressure shock tube and rapid compression machine ignition delay measurements. It is shown that rate constant modifications are required to improve agreement between kinetic modeling simulations and experimental data. We further demonstrate the ability to optimize the kinetic model using both manual and automated techniques for rate parameter tunings to improve agreement with the measured ignition delay time data. Finally, additional low temperature chain branching reaction pathways are shown to improve the models performance. The present approach to model development provides better performance across extended operating conditions while also strengthening the fundamental basis of the model.

Quantification of the Keto-Hydroperoxide (HOOCH2OCHO) and Other Elusive Intermediates during Low-Temperature Oxidation of Dimethyl Ether

This work provides new temperature-dependent mole fractions of elusive intermediates relevant to the low-temperature oxidation of dimethyl ether (DME). It extends the previous study of Moshammer et al. [ J. Phys. Chem. A 2015 , 119 , 7361 - 7374 ] in which a combination of a jet-stirred reactor and molecular beam mass spectrometry with single-photon ionization via tunable synchrotron-generated vacuum-ultraviolet radiation was used to identify (but not quantify) several highly oxygenated species. Here, temperature-dependent concentration profiles of 17 components were determined in the range of 450-1000 K and compared to up-to-date kinetic modeling results. Special emphasis is paid toward the validation and application of a theoretical method for predicting photoionization cross sections that are hard to obtain experimentally but essential to turn mass spectral data into mole fraction profiles. The presented approach enabled the quantification of the hydroperoxymethyl formate (HOOCH2OCH2O), which is a key intermediate in the low-temperature oxidation of DME. The quantification of this keto-hydroperoxide together with the temperature-dependent concentration profiles of other intermediates including H2O2, HCOOH, CH3OCHO, and CH3OOH reveals new opportunities for the development of a next-generation DME combustion chemistry mechanism.

Experimental Investigation of the Low Temperature Oxidation of the Five Isomers of Hexane

The low-temperature oxidation of the five hexane isomers (n-hexane, 2-methyl-pentane, 3-methyl-pentane, 2,2-dimethylbutane, and 2,3-dimethylbutane) was studied in a jet-stirred reactor (JSR) at atmospheric pressure under stoichiometric conditions between 550 and 1000 K. The evolution of reactant and product mole fraction profiles were recorded as a function of the temperature using two analytical methods: gas chromatography and synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS). Experimental data obtained with both methods were in good agreement for the five fuels. These data were used to compare the reactivity and the nature of the reaction products and their distribution. At low temperature (below 800 K), n-hexane was the most reactive isomer. The two methyl-pentane isomers have about the same reactivity, which was lower than that of n-hexane. 2,2-Dimethylbutane was less reactive than the two methyl-pentane isomers, and 2,3-dimethylbutane was the least reactive isomer. These observations are in good agreement with research octane numbers given in the literature. Cyclic ethers with rings including 3, 4, 5, and 6 atoms have been identified and quantified for the five fuels. While the cyclic ether distribution was notably more detailed than in other literature of JSR studies of branched alkane oxidation, some oxiranes were missing among the cyclic ethers expected from methyl-pentanes. Using SVUV-PIMS, the formation of C2-C3 monocarboxylic acids, ketohydroperoxides, and species with two carbonyl groups have also been observed, supporting their possible formation from branched reactants. This is in line with what was previously experimentally demonstrated from linear fuels. Possible structures and ways of decomposition of the most probable ketohydroperoxides were discussed. Above 800 K, all five isomers have about the same reactivity, with a larger formation from branched alkanes of some unsaturated species, such as allene and propyne, which are known to be soot precursors.

Unimolecular decomposition of ethyl hydroperoxide: ab initio/Rice-Ramsperger-Kassel-Marcus theoretical prediction of rate constants.

Alkyl hydroperoxides are found to be important intermediates in the combustion and oxidation processes of hydrocarbons. However, studies of ethyl hydroperoxide (CH(3)CH(2)OOH) are limited. In this work, kinetics and mechanisms for unimolecular decomposition of CH(3)CH(2)OOH have been investigated. The potential energy surface of decomposition reactions have first been predicted at the CCSD(T)/6-311+G(3df,2p)//B3LYP/6-311G(d,p) level. The results show that the formation of CH(3)CH(2)O + OH via O-O direct bond dissociation is dominant, the branching ratio of which is over 99% in the whole temperature range from 300 to 1000 K, and its rate constant can be expressed as k1 = 9.26 × 10(52)T(-11.91)exp(-26879/T) s(-1) at 1 atm. The rate constants of the reaction CH(3)CH(2)OOH → CH(3)CH(2)O + OH at different temperatures and pressures have been calculated, which can help us to comprehend the reactions of CH(3)CH(2)OOH at experimental conditions.

Unraveling the structure and chemical mechanisms of highly oxygenated intermediates in oxidation of organic compounds

Significance Highly oxygenated molecules are involved in autooxidation reactions leading to the formation of secondary organic aerosols (SOAs); they are also critical intermediates in autooxidation processes for liquid hydrogen degradation and the ignition of fuels in advanced combustion systems. However, these reactions are still poorly understood. In this study, we unveil a generalized reaction mechanism involving the autooxidation of peroxy radicals with at least three stages of sequential O2 addition. We elucidate important underlying kinetics and structural characteristics of autooxidation processes used for developing new technologies including those aimed at reducing climatically active SOAs and pollutants from fuel combustion. We show that advances can be made by bridging experimental and theoretical methods used by atmospheric and combustion scientists. Decades of research on the autooxidation of organic compounds have provided fundamental and practical insights into these processes; however, the structure of many key autooxidation intermediates and the reactions leading to their formation still remain unclear. This work provides additional experimental evidence that highly oxygenated intermediates with one or more hydroperoxy groups are prevalent in the autooxidation of various oxygenated (e.g., alcohol, aldehyde, keto compounds, ether, and ester) and nonoxygenated (e.g., normal alkane, branched alkane, and cycloalkane) organic compounds. These findings improve our understanding of autooxidation reaction mechanisms that are routinely used to predict fuel ignition and oxidative stability of liquid hydrocarbons, while also providing insights relevant to the formation mechanisms of tropospheric aerosol building blocks. The direct observation of highly oxygenated intermediates for the autooxidation of alkanes at 500–600 K builds upon prior observations made in atmospheric conditions for the autooxidation of terpenes and other unsaturated hydrocarbons; it shows that highly oxygenated intermediates are stable at conditions above room temperature. These results further reveal that highly oxygenated intermediates are not only accessible by chemical activation but also by thermal activation. Theoretical calculations on H-atom migration reactions are presented to rationalize the relationship between the organic compound’s molecular structure (n-alkane, branched alkane, and cycloalkane) and its propensity to produce highly oxygenated intermediates via extensive autooxidation of hydroperoxyalkylperoxy radicals. Finally, detailed chemical kinetic simulations demonstrate the influence of these additional reaction pathways on the ignition of practical fuels.

Hydroperoxide Measurements During Low-Temperature Gas-Phase Oxidation of n-Heptane and n-Decane

A wide range of hydroperoxides (C1-C3 alkyl hydroperoxides, C3-C7 alkenyl hydroperoxides, C7 ketohydroperoxides, and hydrogen peroxide (H2O2)), as well as ketene and diones, have been quantified during the gas-phase oxidation of n-heptane. Some of these species, as well as C10 alkenyl hydroperoxides and ketohydroperoxides, were also measured during the oxidation of n-decane. These experiments were performed using an atmospheric-pressure jet-stirred reactor at temperatures from 500 to 1100 K and one of three analytical methods, time-of-flight mass spectrometry combined with tunable synchrotron photoionization with a molecular beam sampling: time-of-flight mass spectrometry combined with laser photoionization with a capillary tube sampling, continuous wave cavity ring-down spectroscopy with sonic probe sampling. The experimental temperature at which the maximum mole fraction is observed increases significantly for alkyl hydroperoxides, alkenyl hydroperoxides, and then more so again for hydrogen peroxide, compared to ketohydroperoxides. The influence of the equivalence ratio from 0.25 to 4 on the formation of these peroxides has been studied during n-heptane oxidation. The up-to-date detailed kinetic oxidation models for n-heptane and for n-decane found in the literature have been used to discuss the possible pathways by which these peroxides, ketene, and diones are formed. In general, the model predicts well the reactivity of the two fuels, as well as the formation of major intermediates.

Study of the Formation of the First Aromatic Rings in the Pyrolysis of Cyclopentene

The thermal decomposition of cyclopentene was studied in a jet-stirred reactor operated at constant pressure and temperature to provide new experimental information about the formation of the first aromatic rings from cyclic C5 species. Experiments were carried out at a residence time of 1 s, a pressure of 106.7 kPa, temperatures ranging from 773 to 1073 K and under diluted conditions (cyclopentene inlet mole fraction of 0.04). Species were quantified using three analytical methods: gas chromatography, synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), and single photon laser ionization mass spectrometry (SPI-MS). Several species could be quantified using both methods allowing comparison of experimental data obtained with the three apparatuses. Discrepancies observed in mole fraction profiles of some large aromatics suggest that the direct sampling in the gas phase (with a molecular beam or a capillary tube) provide more reliable results. The main reaction products are 1,3-cyclopentadiene and hydrogen. The formation of many unsaturated C2-C6 olefins, diolefins and alkynes was also observed but in smaller amounts. Benzene, toluene, styrene, indene, and naphthalene were detected from 923 K. SVUV-PIMS data allowed the identification of another C6H6 isomer which is 1,5-hexadien-3-yne rather than fulvene. The quantification of the cyclopentadienyl radical was obtained from SVUV-PIMS and SPI-MS data with some uncertainty induced by the possible contribution to the signal for m/z 65 of a fragment from the decomposition of a larger ion. This is the first time that a radical is quantified in a jet-stirred reactor using non-optical techniques. SPI-MS analyses allowed the detection of species likely being combination products of allyl and cyclopentadienyl radicals. A model was developed for the pyrolysis of cyclopentene. This model includes routes of formation of aromatics from the cyclopentadienyl radical. The comparison of experimental and computed data is overall satisfactory for primary reaction products whereas discrepancies are still observed for aromatics.