Zhang Jiang-Ying

Design of Polarization Beam Splitter in Two-Dimensional Triangular Photonic Crystals

A design of a polarization beam splitter (PBS) in two-dimensional triangular photonic crystals is proposed and numerically demonstrated, for the first time to our knowledge. The principle of the model is based on the polarization dependence of the photonic band gaps in photonic crystals; the polarization extinction ratios for transverse-magnetic and transverse-electric modes are 11.5 dB and 46.7 dB at the centre of its operating frequency range, respectively. When the central wavelength is tuned at 1550 nm, the possible operation wavelength range of this structure can be as large as 28.5 nm, which almost covers the whole C band in modern optical communication systems. Furthermore, due to its small size and only one kind of material being involved, the PBS structure may have practical applications in the integrated optics field.

Fluorescence Enhancement of a Polymer Planar Waveguide Doped with Rhodamine B and Ag Nanoparticles

Planar polymer multi-model waveguides doped with Ag nano-particles and rhodamine B are fabricated and investigated by the spectroscopy analysis method as well as the M-line method. Experimental results shown that fluorescence enhancement occurs when excited by a wide band wavelength with Ag nano-particle concentration at a certain level. The maximum enhancement factor in our experiment is obtained to be about 3.8 when excited by 350 nm. Our study may have potential applications in polymers optical elements, such as polymer waveguide lasers and amplifiers.

Polarized Emission of an Eu3+ Doped Azo-Polymer Waveguide

We investigate the polarized emission behaviour of an Eu3+ doped azo-polymer waveguide. Affected by the azobenzene groups in the photoinduced orientation process by the 532 nm linearly polarized laser, the ligands were realigned orderly perpendicular to the direction of the orientation direction. This leads to the polarized absorption and emission of the waveguide in the orientation direction. By an m-line apparatus based on the prism coupling technique, two guided propagation modes were observed in the waveguide, and the refractive index at 650 nm in TE polarizations is 1.7505.

Effects of Laser-Induced Heating on the Photoinduced Birefringence in Azobenzene-Side-Chain Copolymer

The photoinduced birefringence was observed in the polymer poly[2-(4-(4-cyanophenyl) diazenyl phenyloxy) ethoxyl methacrylate] with a cw 532 nm laser. The azobenzene polymer character has been studied under the conditions of various illuminating time and light intensities. By analysing the processes of reorientation, the effect of laser-induced heating has been introduced to the buildup of photoinduced birefringence in azobenzene-side-chain copolymer. The curves for the buildup of birefringence were fitted with a modified function, i.e., biexponential curves and Gaussian curves. The relationship among all the parameters has also been presented. With the modified fitting function, we obtain a better fitting result.

Birefringence Grating and Surface Grating in Azobenzene Polymer Liquid Crystal Films Investigated by Near-Field Optical Method

The birefringence grating and the surface grating in azobenzene polymer liquid-crystal (Azo-PLC) films are studied by a near-field scanning optical microscope. With laser irradiation, the refractive index change caused by birefringence and the sinusoidal surface profile are observed at the near-field transmittance image and the surface topography of the grating. The grating period and the peak-to-peak value of the sinusoidal surface profile are 0.8 µm and 40 nm, respectively. The maximum diffractive efficiency of the grating is 2%. The dynamic process of the grating formation is probed and analysed. The mass diffusion responsible for the formation of the surface grating due to the temperature rise is analysed.

A Tapping-Mode Tuning Fork with a Short Fibre Probe Sensor for a Near-Field Scanning Optical Microscope

We report on a tapping-mode tuning fork with a short fibre probe sensor for a near-field scanning optical microscope. The method demonstrates how to fabricate the short fibre probe. This tapping-mode tuning fork with a short fibre probe can provide stable and high Q at the tapping frequency of the tuning fork, and can give high-quality near-field scanning optical microscope and atomic force microscope images of samples. We present the results of using the tapping-mode tuning fork with a short fibre probe sensor for a near-field scanning optical microscope performed on an eight-channel silica waveguide.