Zhaodong Huang

One-Dimensional Rod-Like Sb2S3-Based Anode for High-Performance Sodium-Ion Batteries

Due to the high theoretical capacity of 946 mAh g(-1), Sb2S3 can be employed as promising electrode material for sodium-ion batteries (SIBs). Herein, the sodium storage behaviors of one-dimensional (1D) Sb2S3-based materials (Sb2S3 and Sb2S3@C rods) are successfully studied for the first time, displaying good cyclability and rate capability owing to their unique morphology and structure. Specifically, the Sb2S3@C rods electrode presents greatly enhanced electrochemical properties, resulting from the introduction of thin carbon layers which can effectively alleviate the strain caused by the large volume change and simultaneously improve the conductivity of electrode during cycling. At a current density of 100 mA g(-1), it delivers a high capacity of 699.1 mAh g(-1) after 100 cycles, which corresponds to 95.7% of the initial reversible capacity. Even at a high current density of 3200 mA g(-1), the capacity can still reach 429 mAh g(-1). This achievement may be a significant exploration for develpoing novel 1D Sb-based materials or metal sulfide SIBs anodes.

Graphene‐Rich Wrapped Petal‐Like Rutile TiO2 tuned by Carbon Dots for High‐Performance Sodium Storage

Carbon dots inducing petal-like rutile TiO2 wrapped by ultrathin graphene-rich layers are proposed to fabricate superior anodes for sodium-ion batteries, featuring high-rate capabilities and long-term cyclelife, benefiting from promoted electron transport and a shortened Na+ diffusion length. High capacities of 144.4 mA h g-1 (at 837.5 mA g-1 ) after 1100 cycles and 74.6 mA h g-1 (at 3350 mA g-1 ) after 4000 cycles are delivered outstandingly.

Size‐Tunable Olive‐Like Anatase Tio2 Coated with Carbon as Superior Anode for Sodium‐Ion Batteries

Olive-shaped anatase TiO2 with tunable sizes in nanoscale are designed employing polyvinyl alcohol (PVA) as structure directing agents to exert dramatic impacts on structure shaping and size manipulation. Notably, the introduced PVA simultaneously serves as carbon sources, bringing about a homogenous carbon layer with intimate coupling interfaces for boosted electronic conductivity. Constructed from tiny crystalline grains, the uniformly dispersed carbon-coated TiO2 nano-olives (TOC) possess subtle loose structure internally for prompt Na+ transportations. When utilized for sodium-ion storage, the size effects are increasingly significant at high charge-discharge rates, leading to the much superior rate performances of TOC with the smallest size. Bestowed by the improved Na+ adsorption and diffusion kinetics together with the promoted electron transfer, it delivers a high specific capacity of 267 mAh g-1 at 0.1 C (33.6 mA g-1 ) and sustains 110 mAh g-1 at a rather high rate of 20 C. Even after cycled at 10 C over 1000 cycles, a considerable capacity of 125 mAh g-1 with a retention of 94.6% is still obtained, highlighting its marvelous long-term cyclability and high-rate capabilities.

Layer-Tunable Phosphorene Modulated by the Cation Insertion Rate as a Sodium-Storage Anode

Liquid phase exfoliation of few-layer phosphorene (FL-P) is extensively explored in recent years. Nevertheless, their deficiencies such as ultralong sonication time, limited flake size distribution, and uncontrollable thicknesses are major hurdles for the development of phosphorene-based materials. Herein, electrochemical cationic intercalation has been introduced to prepare phosphorene, through which large-area FL-P without surface functional groups can be efficiently attained (less than 1 h). More importantly, its layer number (from 2 to 11 layers) can be manipulated by changing the applied potential. The as-obtained phosphorene delivers superior sodium-storage performances when directly utilized as an anode material in sodium-ion batteries. This electrochemical cation insertion method to prepare phosphorene should greatly facilitate the development of phosphorene-based technologies. Moreover, this work provides the possibility for the scalable preparation of monolayer 2D materials by exploring intercalation ions. Additionally, the successful electrochemical exfoliation of phosphorene can promote the application of electrochemical exfoliation in other 2D materials.

Cypress leaf-like Sb as anode material for high-performance sodium-ion batteries

Cypress leaf-like Sb was prepared by a facile chemical replacement reaction. The sodium storage behavior of the obtained product was firstly investigated, giving a superior electrochemical performance with a high reversible capacity of 629 mA h g−1 after 120 cycles, close to its theoretical capacity (660 mA h g−1).

Pinecone-like hierarchical anatase TiO2 bonded with carbon enabling ultrahigh cycling rates for sodium storage

Hierarchical anatase TiO2 homogeneously tuned by using carbon through Ti–C bonds has been designed, exploiting carbon quantum dots as uniform carbon additives and functionalization inducers for structure tailoring and surface modification. The fabricated pinecone-like structure constructed by ultrafine subunits presents a highly increased surface area (202.4 m2 g−1) and abundant mesopores. Surface bonded carbon significantly boosts its electronic conductivity derived from both the conductive carbon and accompanied oxygen vacancies. When utilized in sodium-ion batteries, it delivers a high reversible specific capacity of 264.1 mA h g−1 at a rate of 0.1C (33.6 mA g−1) and still maintains 108.2 mA h g−1 even after 2000 cycles at 10C with a retention of 94.7% outstandingly. Notably, its Na+ intercalation pseudocapacitive behavior is enhanced by the modulated TiO2/carbon interfaces, facilitating a fast (de-)sodiation process. Combining the elaborate hierarchical structure with the unique surface composition, synergetic merits are noticed when the promoted kinetics, improved electronic conductivity, increased electrolyte penetration areas and shortened Na+ diffusion length are achieved simultaneously, giving rise to remarkable high-rate capabilities and long-term cyclability.

Metal-Organic Framework-Derived Materials for Sodium Energy Storage

Recently, sodium-ion batteries (SIBs) are extensively explored and are regarded as one of the most promising alternatives to lithium-ion batteries for electrochemical energy conversion and storage, owing to the abundant raw material resources, low cost, and similar electrochemical behavior of elemental sodium compared to lithium. Metal-organic frameworks (MOFs) have attracted enormous attention due to their high surface areas, tunable structures, and diverse applications in drug delivery, gas storage, and catalysis. Recently, there has been an escalating interest in exploiting MOF-derived materials as anodes for sodium energy storage due to their fast mass transport resulting from their highly porous structures and relatively simple preparation methods originating from in situ thermal treatment processes. In this Review, the recent progress of the sodium-ion storage performances of MOF-derived materials, including MOF-derived porous carbons, metal oxides, metal oxide/carbon nanocomposites, and other materials (e.g., metal phosphides, metal sulfides, and metal selenides), as SIB anodes is systematically and completely presented and discussed. Moreover, the current challenges and perspectives of MOF-derived materials in electrochemical energy storage are discussed.

Preparation of S/N-codoped carbon nanosheets with tunable interlayer distance for high-rate sodium-ion batteries

The conventional strategies for obtaining S/N-codoped carbon materials suffer from a series of problems caused by their complicated experimental procedures. Here, S,N-codoped carbon nanosheets were firstly prepared by a solvent-free one-pot method, displaying an ultra-thin sheet-like structure, a tunable interlayer distance ranging from 0.37 nm to 0.41 nm, and a large surface area up to 809 m2 g−1. When they were used as an anode for sodium-ion batteries (SIBs), an outstanding sodium-ion storage performance of 380 mA h g−1 was acquired at 100 mA g−1, which can be attributed to the expanded interlayer distance caused by the introduction of the large covalent radius-sulfur. The initial coulombic efficiency improved to 60.9%, which may benefit from N-doping. Most importantly, an excellent rate capability of ∼178 mA h g−1 was observed at a current density of 5 A g−1 after 5000 cycles, which is among best of the state-of-the-art carbon-based SIBs. Interestingly, the morphology of the obtained carbon materials can be tuned from bulk to flake by adjusting the sulfur content or temperature. Given this, this work provides a new method to construct co-doped carbon (especially tri-doped and multi-doped carbon) and shows that the strategy of co-doping of heteroatoms can effectively optimize the nano/microstructure and enhance the rate capability of the carbon materials.

Antimony Anchored with Nitrogen-Doping Porous Carbon as a High-Performance Anode Material for Na-Ion Batteries

Antimony represents a class of unique functional materials in sodium-ion batteries with high theoretical capacity (660 mA h g-1). The utilization of carbonaceous materials as a buffer layer has been considered an effective approach to alleviate rapid capacity fading. Herein, the antimony/nitrogen-doping porous carbon (Sb/NPC) composite with polyaniline nanosheets as a carbon source has been successfully achieved. In addition, our strategy involves three processes, a tunable organic polyreaction, a thermal annealing process, and a cost-effective reduction reaction. The as-prepared Sb/NPC electrode demonstrates a great reversible capacity of 529.6 mA h g-1 and an outstanding cycling stability with 97.2% capacity retention after 100 cycles at 100 mA g-1. Even at 1600 mA g-1, a superior rate capacity of 357 mA h g-1 can be retained. Those remarkable electrochemical performances can be ascribed to the introduction of a hierarchical porous NPC material to which tiny Sb nanoparticles of about 30 nm were well-wrapped to buffer volume expansion and improve conductivity.