Zhaohui Ma

High-Performance All-Solid-State Lithium–Sulfur Battery Enabled by a Mixed-Conductive Li2S Nanocomposite

All-solid-state lithium-sulfur batteries (ASSLSBs) using highly conductive sulfide-based solid electrolytes suffer from low sulfur utilization, poor cycle life, and low rate performance due to the huge volume change of the electrode and the poor electronic and ionic conductivities of S and Li2S. The most promising approach to mitigate these challenges lies in the fabrication of a sulfur nanocomposite electrode consisting of a homogeneous distribution of nanosized active material, solid electrolyte, and carbon. Here, we reported a novel bottom-up method to synthesize such a nanocomposite by dissolving Li2S as the active material, polyvinylpyrrolidone (PVP) as the carbon precursor, and Li6PS5Cl as the solid electrolyte in ethanol, followed by a coprecipitation and high-temperature carbonization process. Li2S active material and Li6PS5Cl solid electrolyte with a particle size of ∼4 nm were uniformly confined in a nanoscale carbon matrix. The homogeneous nanocomposite electrode consisting of different nanoparticles with distinct properties of lithium storage capability, mechanical reinforcement, and ionic and electronic conductivities enabled a mechanical robust and mixed conductive (ionic and electronic conductive) sulfur electrode for ASSLSB. A large reversible capacity of 830 mAh/g (71% utilization of Li2S) at 50 mA/g for 60 cycles with a high rate performance was achieved at room temperature even at a high loading of Li2S (∼3.6 mg/cm(2)). This work provides a new strategy to design a mechanically robust, mixed conductive nanocomposite electrode for high-performance all-solid-state lithium sulfur batteries.

Zn/MnO2 Battery Chemistry With H+ and Zn2+ Coinsertion

Rechargeable aqueous Zn/MnO2 battery chemistry in a neutral or mildly acidic electrolyte has attracted extensive attention recently because all the components (anode, cathode, and electrolyte) in a Zn/MnO2 battery are safe, abundant, and sustainable. However, the reaction mechanism of the MnO2 cathode remains a topic of discussion. Herein, we design a highly reversible aqueous Zn/MnO2 battery where the binder-free MnO2 cathode was fabricated by in situ electrodeposition of MnO2 on carbon fiber paper in mild acidic ZnSO4+MnSO4 electrolyte. Electrochemical and structural analysis identify that the MnO2 cathode experience a consequent H+ and Zn2+ insertion/extraction process with high reversibility and cycling stability. To our best knowledge, it is the first report on rechargeable aqueous batteries with a consequent ion-insertion reaction mechanism.

High power rechargeable magnesium/iodine battery chemistry

Rechargeable magnesium batteries have attracted considerable attention because of their potential high energy density and low cost. However, their development has been severely hindered because of the lack of appropriate cathode materials. Here we report a rechargeable magnesium/iodine battery, in which the soluble iodine reacts with Mg2+ to form a soluble intermediate and then an insoluble final product magnesium iodide. The liquid–solid two-phase reaction pathway circumvents solid-state Mg2+ diffusion and ensures a large interfacial reaction area, leading to fast reaction kinetics and high reaction reversibility. As a result, the rechargeable magnesium/iodine battery shows a better rate capability (180 mAh g−1 at 0.5 C and 140 mAh g−1 at 1 C) and a higher energy density (∼400 Wh kg−1) than all other reported rechargeable magnesium batteries using intercalation cathodes. This study demonstrates that the liquid–solid two-phase reaction mechanism is promising in addressing the kinetic limitation of rechargeable magnesium batteries.

Unique aqueous Li-ion/sulfur chemistry with high energy density and reversibility

Significance Sulfur as an anode coupled with a lithium-ion intercalation cathode in the superconcentrated aqueous electrolyte creates a unique Li-ion/sulfur chemistry, realizing the highest energy density ever achieved in aqueous batteries, along with high safety and excellent cycle-life. Mechanism investigation finds that the reversible sulfur lithiation/delithiation in such an aqueous electrolyte proceeds with fast kinetics that significantly differ from that in nonaqueous systems, whereas polysulfides’ insolubility in such an aqueous electrolyte essentially eliminates the parasitic shuttling. The excellent performances of Li-ion/sulfur cells not only find an application of “water-in-salt” electrolyte for beyond Li-ion chemistries, more importantly, an alternative pathway is provided to solve the “polysulfide shuttling” that has been plaguing the sulfur chemistries in nonaqueous electrolytes. Leveraging the most recent success in expanding the electrochemical stability window of aqueous electrolytes, in this work we create a unique Li-ion/sulfur chemistry of both high energy density and safety. We show that in the superconcentrated aqueous electrolyte, lithiation of sulfur experiences phase change from a high-order polysulfide to low-order polysulfides through solid–liquid two-phase reaction pathway, where the liquid polysulfide phase in the sulfide electrode is thermodynamically phase-separated from the superconcentrated aqueous electrolyte. The sulfur with solid–liquid two-phase exhibits a reversible capacity of 1,327 mAh/(g of S), along with fast reaction kinetics and negligible polysulfide dissolution. By coupling a sulfur anode with different Li-ion cathode materials, the aqueous Li-ion/sulfur full cell delivers record-high energy densities up to 200 Wh/(kg of total electrode mass) for >1,000 cycles at ∼100% coulombic efficiency. These performances already approach that of commercial lithium-ion batteries (LIBs) using a nonaqueous electrolyte, along with intrinsic safety not possessed by the latter. The excellent performance of this aqueous battery chemistry significantly promotes the practical possibility of aqueous LIBs in large-format applications.

High-Performance All-Inorganic Solid-State Sodium–Sulfur Battery

All-inorganic solid-state sodium-sulfur batteries (ASSBs) are promising technology for stationary energy storage due to their high safety, high energy, and abundant resources of both sodium and sulfur. However, current ASSB shows poor cycling and rate performances mainly due to the huge electrode/electrolyte interfacial resistance arising from the insufficient triple-phase contact among sulfur active material, ionic conductive solid electrolyte, and electronic conductive carbon. Herein, we report an innovative approach to address the interfacial problem using a Na3PS4-Na2S-C (carbon) nanocomposite as the cathode for ASSBs. Highly ionic conductive Na3PS4 contained in the nanocomposite can function as both solid electrolyte and active material (catholyte) after mixing with electronic conductive carbon, leading to an intrinsic superior electrode/electrolyte interfacial contact because only a two-phase contact is required for the charge transfer reaction. Introducing nanosized Na2S into the nanocomposite cathode can effectively improve the capacity. The homogeneous distribution of nanosized Na2S, Na3PS4, and carbon in the nanocomposite cathode could ensure a high mixed (ionic and electronic) conductivity and a sufficient interfacial contact. The Na3PS4-nanosized Na2S-carbon nanocomposite cathode delivered a high initial discharge capacity of 869.2 mAh g-1 at 50 mA g-1 with great cycling and rate capabilities at 60 °C, representing the best performance of ASSBs reported to date and therefore constituting a significant step toward high-performance ASSBs for practical applications.

High-Voltage Aqueous Magnesium Ion Batteries

Nonaqueous rechargeable magnesium (Mg) batteries suffer from the complicated and moisture-sensitive electrolyte chemistry. Besides electrolytes, the practicality of a Mg battery is also confined by the absence of high-performance electrode materials due to the intrinsically slow Mg2+ diffusion in the solids. In this work, we demonstrated a rechargeable aqueous magnesium ion battery (AMIB) concept of high energy density, fast kinetics, and reversibility. Using a superconcentration approach we expanded the electrochemical stability window of the aqueous electrolyte to 2.0 V. More importantly, two new Mg ion host materials, Li superconcentration approach we expanded the electrochemical stability window of the aqueous electrolyte to 2.0 V. More importantly, two new Mg ion host materials, Li3V2(PO4)3 and poly pyromellitic dianhydride, were developed and employed as cathode and anode electrodes, respectively. Based on comparisons of the aqueous and nonaqueous systems, the role of water is identified to be critical in the Mg ion mobility in the intercalation host but remaining little detrimental to its non-diffusion controlled process. Compared with the previously reported Mg ion cell delivers an unprecedented high power density of 6400 W kg ion cell delivers an unprecedented high power density of 6400 W kg while retaining 92% of the initial capacity after 6000 cycles, pushing the Mg ion cell to a brand new stage.

Reversible S0/MgSx Redox Chemistry in MgTFSI2-MgCl2 Electrolyte for Rechargeable Mg/S Battery

The redox chemistry of magnesium and its application in rechargeable Mg batteries has received increasing attention owing to the unique benefits of Mg metal electrodes, namely high reversibility without dendrite formation, low reduction potentials, and high specific capacities. The Mg/S couple is of particular interest owing to its high energy density and low cost. Previous reports have confirmed the feasibility of a rechargeable Mg/S battery; however, only limited cycling stability was achieved, and the complicated procedure for the preparation of the electrolytes has significantly compromised the benefits of Mg/S chemistry and hindered the development of Mg/S batteries. Herein, we report the development of the first rechargeable Mg/S battery with a MgTFSI2 /MgCl2 /DME electrolyte (DME=1,2-dimethoxyethane, TFSI=bis(trifluoromethanesulfonyl)imide) and realize the best cycling stability among all reported Mg/S batteries by suppressing polysulfide dissolution. Mechanistic studies show that the battery works via S0 /MgSx redox processes and that the large voltage hysteresis is mainly due to the Mg anode overpotential.

Reverse Microemulsion Synthesis of Sulfur/Graphene Composite for Lithium/Sulfur Batteries

Due to its high theoretical capacity, high energy density, and easy availability, the lithium-sulfur (Li-S) system is considered to be the most promising candidate for electric and hybrid electric vehicle applications. Sulfur/carbon cathode in Li-S batteries still suffers, however, from low Coulombic efficiency and poor cycle life when sulfur loading and the ratio of sulfur to carbon are high. Here, we address these challenges by fabricating a sulfur/carboxylated-graphene composite using a reverse (water-in-oil) microemulsion technique. The fabricated sulfur-graphene composite cathode, which contains only 6 wt % graphene, can dramatically improve the cycling stability as well as provide high capacity. The electrochemical performance of the sulfur-graphene composite is further enhanced after loading into a three-dimensional heteroatom-doped (boron and nitrogen) carbon-cloth current collector. Even at high sulfur loading (∼8 mg/cm2) on carbon cloth, this composite showed 1256 mAh/g discharge capacity with more than 99% capacity retention after 200 cycles.

High energy-density and reversibility of iron fluoride cathode enabled via an intercalation-extrusion reaction

Iron fluoride, an intercalation-conversion cathode for lithium ion batteries, promises a high theoretical energy density of 1922 Wh kg–1. However, poor electrochemical reversibility due to repeated breaking/reformation of metal fluoride bonds poses a grand challenge for its practical application. Here we report that both a high reversibility over 1000 cycles and a high capacity of 420 mAh g−1 can be realized by concerted doping of cobalt and oxygen into iron fluoride. In the doped nanorods, an energy density of ~1000 Wh kg−1 with a decay rate of 0.03% per cycle is achieved. The anion’s and cation’s co-substitutions thermodynamically reduce conversion reaction potential and shift the reaction from less-reversible intercalation-conversion reaction in iron fluoride to a highly reversible intercalation-extrusion reaction in doped material. The co-substitution strategy to tune the thermodynamic features of the reactions could be extended to other high energy conversion materials for improved performance.Poor electrochemical reversibility of the conversion-type cathode materials remains an important challenge for their practical applications. Here, the authors report a highly reversible fluoride cathode material with low hysteresis through concerted doping of cobalt and oxygen into iron fluoride.