Zhaoyang Ye

Fine tuning micellar core-forming block of poly(ethylene glycol)-block-poly(ε-caprolactone) amphiphilic copolymers based on chemical modification for the solubilization and delivery of doxorubicin.

This study aimed to optimize poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL)-based amphiphilic block copolymers for achieving a better micellar drug delivery system (DDS) with improved solubilization and delivery of doxorubicin (DOX). First, the Flory-Huggins interaction parameters between DOX and the core-forming segments [i.e., poly(ε-caprolactone) (PCL) and poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (P(CL-co-CABCL))] was calculated to assess the drug-polymer compatibility. The results indicated a better compatibility between DOX and P(CL-co-CABCL) than that between DOX and PCL, motivating the synthesis of monomethoxy-poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (mPEG-b-P(CL-co-CABCL)) block copolymer. Second, two novel block copolymers of mPEG-b-P(CL-co-CABCL) with different compositions were prepared via ring-opening polymerization of CL and CABCL using mPEG as a macroinitiator and characterized by (1)H NMR, FT-IR, GPC, WAXD, and DSC techniques. It was found that the introduction of CABCL decreased the crystallinity of mPEG-b-PCL copolymer. Micellar formation of the copolymers in aqueous solution was investigated with fluorescence spectroscopy, DLS and TEM. mPEG-b-P(CL-co-CABCL) copolymers had a lower critical micelle concentration (CMC) than mPEG-b-PCL and subsequently led to an improved stability of prepared micelles. Furthermore, both higher loading capacity and slower in vitro release of DOX were observed for micelles of copolymers with increased content of CABCL, attributed to both improved drug-core compatibility and favorable amorphous core structure. Meanwhile, DOX-loaded micelles facilitated better uptake of DOX by HepG2 cells and were mainly retained in the cytosol, whereas free DOX accumulated more in the nuclei. However, possibly because of the slower intracellular release of DOX, DOX-loaded micelles were less potent in inhibiting cell proliferation than free DOX in vitro. Taken together, the introduction of CABCL in the core-forming block of mPEG-b-PCL resulted in micelles with superior properties, which hold great promise for drug delivery applications.

Myocardial regeneration: Roles of stem cells and hydrogels.

Heart failure remains the leading cause of morbidity and mortality. Recently, it was reported that the adult heart has intrinsic regenerative capabilities, prompting a great wave of research into applying cell-based therapies, especially with skeletal myoblasts and bone marrow-derived cells, to regenerate heart tissues. While the mechanism of action for the observed beneficial effects of bone marrow-derived cells remains unclear, new cell candidates are emerging, including embryonic stem (ES) and introduced pluripotent stem (iPS) cells, as well as cardiac stem cells (CSCs) from adult hearts. However, the very low engraftment efficiency and survival of implanted cells prevent cell therapy from turning into a clinical reality. Injectable hydrogel biomaterials based on hydrophilic, biocompatible polymers and peptides have great potential for addressing many of these issues by serving as cell/drug delivery vehicles and as a platform for cardiac tissue engineering. In this review, we will discuss the application of stem cells and hydrogels in myocardial regeneration.

Engineering aligned electrospun PLLA microfibers with nano-porous surface nanotopography for modulating the responses of vascular smooth muscle cells

In tissue engineering research, aligned electrospun ultrafine fibers have been shown to regulate cellular alignment and relevant functional expression, but the imposed effect of individual fiber surface nanotopography on cell behaviour has not been examined closely. This work investigates the impact of superimposing a nano-pore feature atop individual fiber surfaces on the responsive behaviour of human vascular smooth muscle cells (vSMCs) for blood vessel tissue engineering. Well-aligned ultrafine poly(l-lactic acid) (PLLA) microfibers with an average fiber diameter of ca. 1.6 μm were fabricated by using a novel stable jet electrospinning (SJES) method. Ellipse-shaped nano-pores with varied aspect ratios (defined as long-to-short axis ratio) of 2.7-3.9, corresponding to a surface nano-roughness in the range of 54.8-110.0 nm, were in situ generated onto individual fiber surfaces by varying ambient humidity from 45% to 75% during the SJES process. The presence of elliptical nano-pores on fiber surfaces affected the characteristic anisotropic wettability of the aligned PLLA fibers and contributed to greater protein adsorption (up to 17.59 μg mg-1). A 7 day in vitro assessment of human umbilical arterial SMCs cultured on these aligned nano-porous fiber substrates indicated that cellular responses were in close correlation with the elliptical nano-pore feature. A pronounced fiber surface nanotopography was superior in soliciting favorable cellular responses, leading to enhanced cell attachment, proliferation, alignment, expression of the vascular matrix proteins and maintenance of a contractile phenotype. This study thus suggests that introduction of an elliptical nano-pore feature to the aligned microfiber surfaces could provide additional dimensionality of topographical cues to modulate the vSMC responses when using the aligned electrospun ultrafine fibers for engineering vascular constructs.

Fabrication of three-dimensional poly(ε-caprolactone) scaffolds with hierarchical pore structures for tissue engineering.

The physical properties of tissue engineering scaffolds such as microstructures play important roles in controlling cellular behaviors and neotissue formation. Among them, the pore size stands out as a key determinant factor. In the present study, we aimed to fabricate porous scaffolds with pre-defined hierarchical pore sizes, followed by examining cell growth in these scaffolds. This hierarchical porous microstructure was implemented via integrating different pore-generating methodologies, including salt leaching and thermal induced phase separation (TIPS). Specifically, large (L, 200-300 μm), medium (M, 40-50 μm) and small (S, <10 μm) pores were able to be generated. As such, three kinds of porous scaffolds with a similar porosity of ~90% creating pores of either two (LS or MS) or three (LMS) different sizes were successfully prepared. The number fractions of different pores in these scaffolds were determined to confirm the hierarchical organization of pores. It was found that the interconnectivity varied due to the different pore structures. Besides, these scaffolds demonstrated similar compressive moduli under dry and hydrated states. The adhesion, proliferation, and spatial distribution of human fibroblasts within the scaffolds during a 14-day culture were evaluated with MTT assay and fluorescence microscopy. While all three scaffolds well supported the cell attachment and proliferation, the best cell spatial distribution inside scaffolds was achieved with LMS, implicating that such a controlled hierarchical microstructure would be advantageous in tissue engineering applications.

Mesenchymal Stem Cells Downregulate Articular Chondrocyte Differentiation in Noncontact Coculture Systems: Implications in Cartilage Tissue Regeneration

While chondrogenesis of mesenchymal stem cells (MSCs) in vitro has been extensively studied, their participation in cartilage tissue repair remains unresolved. This study was designed to elucidate if MSCs affect the phenotype of articular chondrocytes (ACs). A combination of noncontact coculture modes was developed. Human or rabbit MSCs and rabbit ACs (rACs) were encapsulated in alginate hydrogel beads [three-dimensional (3D)] or cultured in a monolayer [two-dimensional (2D)] and subsequently cocultured in the Transwell(®) system. After coculture, cell morphology, growth, deposition of the cartilaginous extracellular matrix (ECM), and gene expression of rACs were investigated. It was found that upon coculture without a cell-cell contact, both 2D and 3D cultured MSCs dramatically induced the morphological transformation of 2D cultured rACs from round to a spindle-like shape, and however inhibited the generation of cellular aggregates of 3D cultured rACs. Most strikingly, a coculture resulted in a significantly less deposition of the cartilaginous ECM, including glycosaminoglycans and collagen type II by both 2D and 3D cultured rACs. Importantly, similar observations were achieved for rACs cultured in an MSC-conditioned medium, confirming the definite paracrine interactions between MSCs and rACs. Based on the analysis of gene expression, this phenotypic change of rACs was not identical as the dedifferentiation. To the best of our knowledge, this is a first study demonstrating that MSCs could downregulate chondrocytic differentiation of ACs and warrants considerations in cartilage tissue repair.

In Situ Controlled Release of rhBMP-2 in Gelatin-Coated 3D Porous Poly(ε-caprolactone) Scaffolds for Homogeneous Bone Tissue Formation

In tissue engineering, incorporation of bone morphogenetic protein-2 (BMP-2) into biomaterial scaffolds is an attractive strategy to stimulate bone repair. However, suboptimal release of BMP-2 remains a great concern, which may cause unfavorable bone formation as well as severe inflammation. In this study, genipin-cross-linked gelatin entrapped with recombinant human BMP-2 (rhBMP-2) was exploited to decorate the interior surface of three-dimensional porous poly(ε-caprolactone) (PCL) scaffolds. With gelatin-coating, PCL scaffolds demonstrated enhanced water uptake and improved compressive moduli. Intriguingly, a unique release profile of rhBMP-2 composed of a transient burst release followed by a sustained release was achieved in coated scaffolds. These coated scaffolds well supported growth and osteogenesis of human mesenchymal stem cells (hMSCs) in vitro, indicating the retaining of rhBMP-2 bioactivity. When hMSCs-seeded scaffolds were implanted subcutaneously in nude mice for 4 weeks, better bone formation was observed in gelatin/rhBMP-2-coated scaffolds. Specifically, the spatial distribution of newly formed bone was more uniform in gelatin-coated scaffolds than in uncoated scaffolds, which displayed preferential bone formation at the periphery. These results collectively demonstrated that gelatin-coating of porous PCL scaffolds is a promising approach for delivering rhBMP-2 to stimulate improved bone regeneration.

Synthesis, characterization, fluorescence labeling and cellular internalization of novel amine -functionalized poly(ethylene glycol)- block -poly(ε-caprolactone) amphiphilic block copolymers

We report in this paper a facile way to prepare novel amine-functionalized monomethoxy-poly(ethylene glycol)-b-poly(e-caprolactone) (mPEG-b-PCL) amphiphilic block copolymers, which are subsequently fluorescently labeled. In our synthetic route, monomethoxy-poly(ethylene glycol)-b-poly[e-caprolactone-co-γ-(carbamic acid benzyl ester)-e-caprolactone] [mPEG-b-P(CL-co-CABCL)] copolymers were synthesized viaring-opening polymerization (ROP) of e-caprolactone (CL) and a newly developed monomer, γ-(carbamic acid benzyl ester)-e-caprolactone (CABCL) at varied ratios using mPEG as macroinitiator and Sn(Oct)2 as catalyst. Subsequent deprotection upon removal of carbobenzoxy (Cbz) group yielded monomethoxy-poly(ethylene glycol)-b-poly(e-caprolactone-co-γ-amino-e-caprolactone) [mPEG-b-P(CL-co-ACL)] copolymers bearing primary amine functional groups on the PCL block. The structures of polymers were characterized with NMR, FT-IR and GPC techniques. These amphiphilic block copolymers self-assembled into micelles in aqueous solution and the critical micelle concentration (CMC) was dependent on the compositions of the copolymers. In addition, the particle size and morphology of micelles were studied with DLS and TEM, respectively. In vitro study demonstrated that the micelles were nontoxic to human fibroblasts based on MTT and live/dead assays. Furthermore, a proof-of-concept usage of amino groups for bioconjugation was illustrated by tagging the copolymer with a fluorophore, fluorescein isothiocyanate (FITC). Internalization of FITC-labeled micelles by fibroblast cells was observed under fluorescence microscopy. Through facile conjugation of chemical moieties such as drugs, peptides, proteins or fluorophores, micelles prepared with these amine-functionalized mPEG-b-PCL copolymers hold great promise in biomedical applications.

AICAR, a Small Chemical Molecule, Primes Osteogenic Differentiation of Adult Mesenchymal Stem Cells:

The chemical approach to controlling stem cell fates is emerging as a powerful tool, holding great promise in tissue engineering and regenerative medicine. Various small molecules have been demonstrated capable of modulating stem cell differentiation. In this paper, we studied the effects of 5-aminoimidazole-4-carboxamide-1-β-riboside (AICAR), an activator of AMP-activated protein kinase (AMPK), on mesenchymal stem cells (MSCs). AICAR at high concentrations (1.0–2.0 mM) significantly inhibited proliferation of both human amnion-derived MSCs (hAMSCs) and rabbit bone marrow-derived MSCs (BM-MSCs). Most importantly, AICAR efficiently promoted the osteogenic differentiation of hAMSCs and BM-MSCs in both growth medium and osteogenic medium. However, Metformin, another AMPK activator, showed no such effects. Meanwhile, AICAR significantly inhibited adipogenic differentiation of hAMSCs and BM-MSCs. Our data suggests that AICAR represents a potent molecule, which can be applied in bone tissue regeneration.

Detailed understanding of enhanced specific productivity in Chinese hamster ovary cells at low culture temperature.

The specific productivity of tumor necrosis factor receptor-immunoglobulin G1 Fc fusion (TNFR-Fc) (q(TNFR-Fc)) in Chinese hamster ovary (CHO) cells at 30°C was approximately 5-fold higher than that at 37°C. To investigate reasons for increased q(TNFR-Fc) at low culture temperature, TNFR-Fc mRNA levels were determined by real-time PCR. It was found that like q(TNFR-Fc), the relative TNFR-Fc mRNA level was increased by lowering culture temperature, and more importantly, the kinetics of the increase in TNFR-Fc mRNA levels were in accordance with the changes in q(TNFR-Fc). The results demonstrated that the increased transcriptional level of TNFR-Fc was responsible for the increased q(TNFR-Fc) at low culture temperature. Enhanced levels of mRNA could derive from increased gene copy number, improved mRNA stability, or enhanced transcriptional rate. There was not a big change of gene copy number by lowering culture temperature. The transcriptional rate of TNFR-Fc was slightly decreased at 30°C, compared to 37°C. However, mRNA stability of TNFR-Fc was significantly improved by lowering culture temperature. The half-life of TNFR-Fc mRNA was 5.55 h at 30°C, whereas that was 3.69h at 37°C. Taken together, the reasons for the increased q(TNFR-Fc) in CHO cells at low culture temperature were mainly the enhanced TNFR-Fc mRNA levels, which resulted from the improved mRNA stability, rather than the changes in the gene copy number or the transcriptional rate.

A combinatorial variation in surface chemistry and pore size of three-dimensional porous poly(ε-caprolactone) scaffolds modulates the behaviors of mesenchymal stem cells.

Biomaterial properties play significant roles in controlling cellular behaviors. The objective of the present study was to investigate how pore size and surface chemistry of three-dimensional (3D) porous scaffolds regulate the fate of mesenchymal stem cells (MSCs) in vitro in combination. First, on poly(ε-caprolactone) (PCL) films, the hydrolytic treatment was found to stimulate the adhesion, spreading and proliferation of human MSCs (hMSCs) in comparison with pristine films, while the aminolysis showed mixed effects. Then, 3D porous PCL scaffolds with varying pore sizes (100-200μm, 200-300μm and 300-450μm) were fabricated and subjected to either hydrolysis or aminolysis. It was found that a pore size of 200-300μm with hydrolysis in 3D scaffolds was the most favorable condition for growth of hMSCs. Importantly, while a pore size of 200-300μm with hydrolysis for 1h supported the best osteogenic differentiation of hMSCs, the chondrogenic differentiation was greatest in scaffolds with a pore size of 300-450μm and treated with aminolysis for 1h. Taken together, these results suggest that surface chemistry and pore size of 3D porous scaffolds may potentially have a synergistic impact on the behaviors of MSCs.