Zhe She

Impedance based detection of pathogenic E. coli O157:H7 using a ferrocene-antimicrobial peptide modified biosensor.

Escherichia coli O157:H7 can cause life-threatening gastrointestinal diseases and has been a severe public health problem worldwide in recent years. A novel biosensor for the detection of E. coli O157:H7 is described here using a film composed of ferrocene-peptide conjugates, in which the antimicrobial peptide magainin I has been incorporated as the biorecognition element. Electrochemical impedance spectroscopy was employed to investigate the surface characteristics of the newly developed biosensor and to monitor the interactions between the peptide film and the pathogenic bacteria. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were employed to confirm the immobilization of ferrocene-conjugate onto the gold surface. Non-pathogenic E. coli K12, Staphylococcus epidermidis and Bacillus subtilis were used in this study to evaluate the selectivity of the proposed biosensor. The results have shown the order of the preferential selectivity of the method is E. coli O157:H7>non-pathogenic E. coli>gram positive species. The detection of E. coli O157:H7 with a sensitivity of 10(3)cfu/mL is enabled by the biosensor. The experimental conditions have been optimized and the plot of changes of charge transfer resistance (ΔRCT) and the logarithm of the cell concentration of E. coli O157:H7 shows a linear correlation in the range of 10(3)-10(7)cfu/mL with a correlation coefficient of 0.983.

Sensitive electrochemical detection of Salmonella with chitosan–gold nanoparticles composite film

An ultrasensitive electrochemical immunosensor for detection of Salmonella has been developed based on using high density gold nanoparticles (GNPs) well dispersed in chitosan hydrogel and modified glassy carbon electrode. The composite film has been oxidized in NaCl solution and used as a platform for the immobilization of capture antibody (Ab1) for biorecognition. After incubation in Salmonella suspension and horseradish peroxidase (HRP) conjugated secondary antibody (Ab2) solution, a sandwich electrochemical immunosensor has been constructed. The electrochemical signal was obtained and improved by comparing the composite film with chitosan film. The result has shown that the constructed sensor provides a wide linear range from 10 to 10(5) CFU/mL with a low detection limit of 5 CFU/mL (at the ratio of signal to noise, S/N=3:1). Furthermore, the proposed immunosensor has demonstrated good selectivity and reproducibility, which indicates its potential in the clinical diagnosis of Salmonella contaminations.

Simple direct formation of self-assembled N-heterocyclic carbene monolayers on gold and their application in biosensing

The formation of organic films on gold employing N-heterocyclic carbenes (NHCs) has been previously shown to be a useful strategy for generating stable organic films. However, NHCs or NHC precursors typically require inert atmosphere and harsh conditions for their generation and use. Herein we describe the use of benzimidazolium hydrogen carbonates as bench stable solid precursors for the preparation of NHC films in solution or by vapour-phase deposition from the solid state. The ability to prepare these films by vapour-phase deposition permitted the analysis of the films by a variety of surface science techniques, resulting in the first measurement of NHC desorption energy (158±10 kJ mol−1) and confirmation that the NHC sits upright on the surface. The use of these films in surface plasmon resonance-type biosensing is described, where they provide specific advantages versus traditional thiol-based films.

Investigation of the Utility of Complementary Electrochemical Detection Techniques to Examine the in Vitro Affinity of Bacterial Flagellins for a Toll-Like Receptor 5 Biosensor

An initial investigation of the fabrication of a novel biosensor utilizing toll-like receptor 5 (TLR5) has been conducted. The detection assay using this sensor platform has been carried out using two complementary electrochemical techniques. The electrochemical properties of the modified bare gold surface following TLR5 immobilization were characterized. The electrochemical response to changes in the sensor film resistance and electron charge-transfer permittivity triggered by independent exposures to flagellins from Salmonella typhimurium (S. typhimurium) and Bacillus subtilis (B. subtilis) were examined and observed. The quantified film resistance data gathered using electrochemical impedance spectroscopy (EIS) over a macroscopic scale are in significant agreement with the corresponding electron charge-transfer permittivity measured locally by scanning electrochemical microscopy (SECM). Unlike other sensors that exploit pathogen recognition elements, TLR5 biosensors have the potential to carry out broad-spectrum detection of flagellated bacterial pathogens in near real time. This broad-spectrum detection platform is a significant step toward the development of fast, inexpensive clinical tools for early warning diagnoses and immediate on-site treatment.

DNA Films Containing the Artificial Nucleobase Imidazole Mediate Charge Transfer in a Silver(I)-Responsive Way

The first sequence-dependent study of DNA films containing metal-mediated base pairs was performed to investigate the charge transfer resistance (RCT ) of metal-modified DNA. The imidazole (Im) deoxyribonucleoside was chosen as a highly AgI -specific ligandoside for the formation of Im-AgI -Im complexes within the duplexes. This new class of site-specifically metal-modified DNA films was characterized by UV, circular dichroism (CD), and X-ray photoelectron spectroscopy (XPS). The electrochemical properties of these systems were investigated by means of electron impedance spectroscopy and scanning electrochemical microscopy. Taken together, these experiments indicated that the incorporation of AgI ions into the DNA films leads to reduced electron transfer through the DNA films. A simple device was proposed that can be switched reversibly between two distinct states with different charge transfer resistance.

Fabrication and characterization of a novel nanoporous Co–Ni–W–B catalyst for rapid hydrogen generation

A highly active nanoporous Co–Ni–W–B alloy has been prepared using chemical reduction in an ethanol solution and tested as a novel catalyst for hydrolysis of ammonia borane. Compared with the alloy prepared in an aqueous solution, the as-prepared alloy shows a much higher surface area and hydrogen generation rate.

Electrochemical detection of carcinoembryonic antigen

In this work, a sandwich-type electrochemical immunosensor for carcinoembryonic antigen (CEA) detection has been constructed and tested. Unlike many other sensors using external electrochemical species in the electrolyte to generate an electrochemical signal, a ferrocene derivative has been integrated into the design of the sensor to provide an internal reporting system, allowing detection of CEA in buffers and biological samples. Gold nanoparticles, which have been used to increase the conductivity of sensing surfaces, also carry immobilized secondary anti-CEA and a ferrocene derivative. The shelf life testing of the sensor shows good performance after storage for 4 weeks. The sensor has been calibrated against different concentration of the target protein using square wave voltammetry. The calibration curve has been obtained in the range of 0.05-20ngmL-1, and the detection limit for CEA is ~ 0.01ngmL-1. The capability of the immunosensor has been verified by performing detection of CEA in human serum samples.

Effects of bipyramidal gold nanoparticles and gold nanorods on the detection of immunoglobulins

Two types of gold nanoparticles are compared for their use in a sensor for immunoglobulin detection - bipyramidal gold nanoparticles (GBPs) and gold nanorods (GNRs). Using surface plasmon resonance spectroscopy and square wave voltammetry allowed us to evaluate the utilities of these two types of gold nanoparticles in a label-free detection of the analyte IgG. However both systems showed a significant enhancement in sensitivity over a nanoparticle free system, showing a 64-fold enhancement for the GBP-containing sensor and a 16-fold enhancement for the GNR-containing sensor systems.

Gold nanoparticles-based multifunctional nanoconjugates for highly sensitive and enzyme-free detection of E.coli K12

Immobilization of proteins on a biocompatible conductive interface is highly desirable for the fabrication of biosensors. In this study, a nanocomposite has been prepared by assembling well-distributed gold nanoparticles (AuNPs) on the surface of a polypyrrole-reduced graphene oxide (PPy-rGO) composite through electrostatic adsorption. This serves as a platform for immobilization of a capture antibody, which was conjugated onto the ferrocene doped polypyrrole-gold nanoparticles (PPy@Fc/AuNPs) composite. The design and performance of the biosensor was tested against detection of a whole-cell bacteria E. coli K12. This nanocomposite has a high surface area, good conductivity and biocompatibility, which is shown to be very suitable for enzyme-free detection of this bacteria. Results show excellent analytical performance with a linear range from 1.0 × 101 to 1.0 × 107 CFU mL-1 and a low detection limit of 10 CFU mL-1. The sensor has high selectivity, excellent reproducibility, and good stability.

Electron Transfer in Spacer-Free DNA Duplexes Tethered to Gold via dA10 Tags

Electrical properties of DNA critically depend on the way DNA molecules are integrated within the electronics, particularly on DNA-electrode immobilization strategies. Here, we show that the rate of electron transport in DNA duplexes spacer-free tethered to gold via the adenosine terminal region (a dA10 tag) is enhanced compared to the hitherto reported DNA-metal electrode tethering chemistries. The rate of DNA-mediated electron transfer (ET) between the electrode and methylene blue intercalated into the dA10-tagged DNA duplex approached 361 s-1 at a ca. half-monolayer DNA surface coverage ΓDNA (with a linear regression limit of 670 s-1 at ΓDNA → 0), being 2.7-fold enhanced compared to phosphorothioated dA5* tethering (6-fold for the C6-alkanethiol linker representing an additional ET barrier). X-ray photoelectron spectroscopy evidenced dA10 binding to the Au surface via the purine N, whereas dA5* predominantly coordinated to the surface via sulfur atoms of phosphothioates. The latter apparently induces the DNA strand twist in the point of surface attachment affecting the local DNA conformation and, as a result, decreasing the ET rates through the duplex. Thus, a spacer-free DNA coupling to electrodes via dA10 tags thus allows a perspective design of DNA electronic circuits and sensors with advanced electronic properties and no implication from more expensive, synthetic linkers.