Zhejian Li

Detection and discrimination of alpha-fetoprotein with a label-free electrochemical impedance spectroscopy biosensor array based on lectin functionalized carbon nanotubes

A label-free electrochemical impedance spectroscopy (EIS) biosensor for the sensitive determination and discrimination of alpha-fetoprotein (AFP) was developed by employing wheat-germ agglutinin (WGA) lectin as molecular recognition element. The EIS biosensor was fabricated by adsorbing carboxyl-functionalized single-wall carbon nanotubes (SWNTs) onto a screen-printed carbon electrode (SPCE) and subsequently covalently coupling WGA onto the surface of the SWNTs-modified electrode. Upon binding of AFP to the biosensor, the electron transfer resistance was increased and the increase in the electron transfer resistance was linearly proportional to the logarithm of the concentration of AFP in the range from 1 to 100 ng/L with a detection limit of 0.1 ng/L. It was found that the employment of SWNTs as immobilization platform could reduce the background and enhance the EIS response. Moreover, the lectin-based biosensor array fabricated with different lectins was used to evaluate the glycan expression of AFP N-glycan and discriminate AFP between healthy and cancer patients serum samples. This work demonstrates that the employment of carbon nanotubes as immobilization platform and lectin as molecular recognition element in biosensor array is a promising approach for the determination and discrimination of glycoproteins for cancer diagnosis. The strategy proposed in this work could further be used for high-throughput, label-free profiling of the glycan expression of cancer-related glycoproteins and to develop methods for cancer diagnosis in the early stages.

Electrogenerated chemiluminescence biosensing for the detection of prostate PC-3 cancer cells incorporating antibody as capture probe and ruthenium complex-labelled wheat germ agglutinin as signal probe.

A highly selective and sensitive electrogenerated chemiluminescence (ECL) biosensor for the detection of prostate PC-3 cancer cells was designed using a prostate specific antibody as a capture probe and ruthenium complex-labelled wheat germ agglutinin as a signal probe. The ECL biosensor was fabricated by covalently immobilising the capture probe on a graphene oxide-coated glassy carbon electrode. Target PC-3 cells were selectively captured on the surface of the biosensor, and then, the signal probe was bound with the captured PC-3 cells to form a sandwich. In the presence of tripropylamine, the ECL intensity of the sandwich biosensor was logarithmically directly proportion to the concentration of PC-3 cells over a range from 7.0×10(2) to 3.0×10(4) cells mL(-1), with a detection limit of 2.6×10(2) cells mL(-1). The ECL biosensor was also applied to detect prostate specific antigen with a detection limit of 0.1 ng mL(-1). The high selectivity of the biosensor was demonstrated in comparison with that of a lectin-based biosensor. The strategy developed in this study may be a promising approach and could be extended to the design of ECL biosensors for highly sensitive and selective detection of other cancer-related cells or cancer biomarkers using different probes.

Electrogenerated Chemiluminescence Bioanalytic System Based on Biocleavage of Probes and Homogeneous Detection

A novel electrogenerated chemiluminescence (ECL) bioanalytic system based on biocleavage of a ECL probe and homogeneous detection was designed and utilized for the first time for highly sensitive quantification of proteases to overcome drawbacks from probes directly immobilized on electrodes and commercial ECL biosystems, based on bioaffinity reactions. Prostate-specific antigen (PSA) was taken as a model analyte and ruthenium complex-tagged specific peptide (CHSSKLQK) was designed as an ECL probe (peptide-Ru1). ECL bioconjugated magnetic beads were synthesized through a simple solid-phase synthesis. When analyte PSA was introduced into the suspension of ECL bioconjugated magnetic beads, a biocleavage of the peptide occurred and the cleaved Ru1 part was released from the magnetic beads. ECL measurement was carried out in the presence of co-reactant tripropylamine, using two models. One is homogeneous ECL detection on a bare graphite pencil electrode (PGE), and the other is enriching ECL detection after the cleaved Ru1 part of the peptide was concentrated into the surface film of Nafion/gold nanoparticles modified PGE (AuNPs/Nafion/PGE). The extremely low detection limit of 80 fg/mL and high reproducibility (relative standard deviation (RSD) of 5.4% for six measurements of 0.5 pg/mL) for the detection of PSA were achieved at AuNPs/Nafion/PGE. This work demonstrates that the bioanalytic system designed can not only quantify proteases with high sensitivity and selectivity, but also diminish the complicated electrode process and improve the reproducibility by conducting the biocleavage and transduction steps at different surfaces. It can be easily extended for ECL analysis of other proteases in this system and other detection techniques, including optics and electrochemistry.

Electrogenerated chemiluminescence aptasensor for ultrasensitive detection of thrombin incorporating an auxiliary probe.

A novel electrogenerated chemiluminescence (ECL) aptasensor for ultrasensitive detection of thrombin incorporating an auxiliary probe was designed by employing specific anti-thrombin aptamer as a capture probe and a ruthenium(II) complex-tagged reporter probe as an ECL probe and an auxiliary probe to assist the ECL probe close to the surface of the electrode. The ECL aptasensor was fabricated by self-assembling a thiolated capture probe on the surface of gold electrode and then hybridizing the ECL probe with the capture probe, and further self-assembling the auxiliary probe. When analyte thrombin was bound with the capture probe, the part of the dehybridized ECL probe was hybridized with the neighboring auxiliary probe, led to the tagged ruthenium(II) complex close to the electrode surface, resulted in great increase in the ECL intensity. The results showed that the increased ECL intensity was directly related to the logarithm of thrombin concentrations in the range from 5.0 × 10(-15)M to 5.0 × 10(-12)M with a detection limit of 2.0 × 10(-15)M. This work demonstrates that employing an auxiliary probe which exists nearby the capture probe can enhance the sensitivity of the ECL aptasensor. This promising strategy will be extended to the design of other biosensors for detection of other proteins and genes.

Simple and highly sensitive electrogenerated chemiluminescence adenosine aptasensor formed by adsorbing a ruthenium complex-tagged aptamer on single-walled carbon nanotubes

A highly sensitive electrogenerated chemiluminescence (ECL) adenosine aptasensor was designed by simply adsorbing a ruthenium complex-tagged aptamer on single-walled carbon nanotubes (SWNTs). A specific anti-adenosine binding aptamer was used as the recognition molecular element and ruthenium(II) complex (Ru1) was used as the ECL signal compound. Ru1-tagged aptamer was utilized as an ECL probe and the ECL probe was non-covalently assembled on the surface of the SWNTs to form an ECL probe/SWNTs composite. Analyte adenosine was bound with the aptamer of the ECL probe on the SWNTs so that the ECL probe was moved away or dropped from the SWNTs, resulting in the decrease of ECL signal. The results showed that the decreased ECL intensity was directly related to the logarithm of adenosine concentration in the range from 1.0 × 10−10 M to 5.0 × 10−7 M with a detection limit of 5.0 × 10−11 M. This work demonstrates that the strategy of simply adsorbing ECL probe/SWNTs composites as a biosensing platform is a promising approach to design ECL aptasensors with high sensitivity and selectivity.