Zhijun Guo

Surface bioactivation through the nanostructured layer on titanium modified by facile HPT treatment

Facile fabrication of nanostructured surface is of great importance for the use of titanium (Ti) implants in biomedical field. In this study, a low-cost and easy-to-operate method called HPT (hydrothermal & pressure) here has been developed and used to fabricate the expected nanostructured surface on Ti substrates. The effects of experimental parameters on the morphology of Ti surface were investigated and characterized. The results indicated that by altering the hydrothermal pressure, NaOH concentration and treating time, surface nanostructure like nanopetals or nanoflakes could be formed on the surface of Ti substrates. The orthogonal experiments were conducted to demonstrate the optimized operation conditions. A formation mechanism of the nanostructured titanate layer was proposed, revealing that the nanostructured layer could be formed via a special upward and downward co-growth manner. In vitro cell culture showed that the HPT treated Ti substrates, especially the T-10 sample, could greatly enhance the cell-material interactions, i.e. the cell proliferation and differentiation, focal protein adhesion, and osteogenic factor expression. The HPT method paves a new way to modify the surface of Ti implants with better bioactivity and promising prospect for future biomedical applications.

Composite elastomeric polyurethane scaffolds incorporating small intestinal submucosa for soft tissue engineering

Although soft tissue replacement has been clinically successful in many cases, the corresponding procedure has many limitations including the lack of resilience and mechanical integrity, significant donor-site morbidity, volume loss with time, and fibrous capsular contracture. These disadvantages can be alleviated by utilizing bio-absorbable scaffolds with high resilience and large strain, which are capable of stimulating natural tissue regeneration. Hence, the chemically crosslinked tridimensional scaffolds obtained by incorporating water-based polyurethane (PU) (which was synthesized from polytetramethylene ether glycol, isophorone diisocyanate, and 2,2-bis(hydroxymethyl) butyric acid) into a bioactive extracellular matrix consisting of small intestinal submucosa (SIS) have been tested in this study to develop a new approach for soft tissue engineering. After characterizing the structure and properties of the produced PU/SIS composites, the strength, Youngs modulus, and resilience of wet PU/SIS samples were compared with those of crosslinked PU. In addition, the fabricated specimens were investigated using human umbilical vein endothelial cells to evaluate their ability to enhance cell attachment and proliferation. As a result, the synthesized PU/SIS samples exhibited high resilience and were capable of enhancing cell viability with no evidence of cytotoxicity. Subcutaneous implantation in animals and the subsequent testing conducted after 2, 4, and 8weeks indicated that sound implant integration and vascularization occurred inside the PU/SIS composites, while the presence of SIS promoted cell infiltration, angiogenesis, and ultimately tissue regeneration. The obtained results revealed that the produced PU/SIS composites were characterized by high bioactivity and resilience, and, therefore, could be used for soft tissue engineering applications. STATEMENT OF SIGNIFICANCE Hybrid composites containing synthetic polymers with high mechanical strength and naturally derived components, which create a bio-mimetic environment, are one of the most promising biomaterials. Although synthetic polymer/ECM composites have been previously used for soft tissue repair, their resilience properties were not investigated in sufficient detail, while the development of elastic composites composed of synthetic polymers and ECMs in nontoxic aqueous solutions remains a rather challenging task. In this study, porous PU/SIS composites were fabricated in a non-toxic manner; the obtained materials exhibited sufficient mechanical support, which promote cell growth, angiogenesis, and tissue regeneration. The described method can be adapted for the development of scaffolds with various acellular matrices and subsequently used during the restoration of particular types of tissue.

Nanostructured titanium surfaces fabricated by hydrothermal method: Influence of alkali conditions on the osteogenic performance of implants

Hydrothermal method is an easy-to-use approach for creating nanostructured surfaces on titanium (Ti). However, whether the alkali conditions of this method influence the osteogenic potential of the modified surfaces remains unknown. In this study, we fabricated nanostructured surfaces, termed the Ti-1, Ti-5, and Ti-10 groups, by using the hydrothermal method in 1 M, 5 M, and 10 M NaOH aqueous solutions, respectively. An untreated Ti surface served as a control. The osteogenic performance of modified surfaces was systemically investigated, including the proliferation and osteogenic differentiation of human osteoblast-like MG63 cells in vitro and the osteointegration of implants in a rabbit femoral condyle defect model. After hydrothermal treatment, the hydrophilicity of modified surfaces was greatly enhanced. The Ti-1 group showed a nanowire-like topography, while the Ti-5 and Ti-10 groups exhibited a nanopetal-like topography with different pore sizes. Compared with the untreated Ti surface, the modified surfaces showed good cytocompatibility and enhanced the osteogenic differentiation of MG-63 cells. Compared with the other modified surfaces, the Ti-5 group was the most favourable for the osteogenic differentiation of cells, showing higher levels of alkaline phosphatase activity, osteogenic gene expression, mineralization and osteoprotegerin secretion. Twelve weeks after implantation at the bone defects, the Ti-5 group showed superior peri-implant bone regeneration and higher peak push-out force than the other groups. Overall, this study revealed the crucial role of alkali conditions of hydrothermal method in modulating the material characteristics of modified surfaces and their osteogenic performance in vitro and in vivo, highlighting the need for optimizing the processing conditions of hydrothermal method for enhanced osteointegration.