Zhisheng Zhao

Ultrahard nanotwinned cubic boron nitride

Cubic boron nitride (cBN) is a well known superhard material that has a wide range of industrial applications. Nanostructuring of cBN is an effective way to improve its hardness by virtue of the Hall–Petch effect—the tendency for hardness to increase with decreasing grain size. Polycrystalline cBN materials are often synthesized by using the martensitic transformation of a graphite-like BN precursor, in which high pressures and temperatures lead to puckering of the BN layers. Such approaches have led to synthetic polycrystalline cBN having grain sizes as small as ∼14 nm (refs 1, 2, 4, 5). Here we report the formation of cBN with a nanostructure dominated by fine twin domains of average thickness ∼3.8 nm. This nanotwinned cBN was synthesized from specially prepared BN precursor nanoparticles possessing onion-like nested structures with intrinsically puckered BN layers and numerous stacking faults. The resulting nanotwinned cBN bulk samples are optically transparent with a striking combination of physical properties: an extremely high Vickers hardness (exceeding 100 GPa, the optimal hardness of synthetic diamond), a high oxidization temperature (∼1,294 °C) and a large fracture toughness (>12 MPa m1/2, well beyond the toughness of commercial cemented tungsten carbide, ∼10 MPa m1/2). We show that hardening of cBN is continuous with decreasing twin thickness down to the smallest sizes investigated, contrasting with the expected reverse Hall–Petch effect below a critical grain size or the twin thickness of ∼10–15 nm found in metals and alloys.

Nanotwinned diamond with unprecedented hardness and stability

Although diamond is the hardest material for cutting tools, poor thermal stability has limited its applications, especially at high temperatures. Simultaneous improvement of the hardness and thermal stability of diamond has long been desirable. According to the Hall−Petch effect, the hardness of diamond can be enhanced by nanostructuring (by means of nanograined and nanotwinned microstructures), as shown in previous studies. However, for well-sintered nanograined diamonds, the grain sizes are technically limited to 10−30 nm (ref. 3), with degraded thermal stability compared with that of natural diamond. Recent success in synthesizing nanotwinned cubic boron nitride (nt-cBN) with a twin thickness down to ∼3.8 nm makes it feasible to simultaneously achieve smaller nanosize, ultrahardness and superior thermal stability. At present, nanotwinned diamond (nt-diamond) has not been fabricated successfully through direct conversions of various carbon precursors (such as graphite, amorphous carbon, glassy carbon and C60). Here we report the direct synthesis of nt-diamond with an average twin thickness of ∼5 nm, using a precursor of onion carbon nanoparticles at high pressure and high temperature, and the observation of a new monoclinic crystalline form of diamond coexisting with nt-diamond. The pure synthetic bulk nt-diamond material shows unprecedented hardness and thermal stability, with Vickers hardness up to ∼200 GPa and an in-air oxidization temperature more than 200 °C higher than that of natural diamond. The creation of nanotwinned microstructures offers a general pathway for manufacturing new advanced carbon-based materials with exceptional thermal stability and mechanical properties.

Tetragonal Allotrope of Group 14 Elements

Group 14 elements (C, Si, and Ge) exist as various stable and metastable allotropes, some of which have been widely applied in industry. The discovery of new allotropes of these elements has long attracted considerable attention; however, the search is far from complete. Here we computationally discovered a tetragonal allotrope (12 atoms/cell, named T12) commonly found in C, Si, and Ge through a particle swarm structural search. The T12 structure employs sp(3) bonding and contains extended helical six-membered rings interconnected by pairs of five- and seven-membered rings. This arrangement results in favorable thermodynamic conditions compared with most other experimentally or theoretically known sp(3) species of group 14 elements. The T12 polymorph naturally accounts for the experimental d spacings and Raman spectra of synthesized metastable Ge and Si-XIII phases with long-puzzling unknown structures, respectively. We rationalized an alternative experimental route for the synthesis of the T12 phase via decompression from the high-pressure Si- or Ge-II phase.

Flexible All-Solid-State Supercapacitors based on Liquid-Exfoliated Black-Phosphorus Nanoflakes.

Flexible all-solid-state supercapacitors are fabricated with liquid-exfoliated black-phosphorus (BP) nanoflakes as an electrode material. These devices deliver high specific volumetric capacitance, power density, and energy density, up to 13.75 F cm(-3) , 8.83 W cm(-3) , and 2.47 mW h cm(-3) , respectively, and an outstanding long life span of over 30 000 cycles, demonstrating the excellent performance of the BP nanoflakes as a flexible electrode material in electrochemical energy-storage devices.

Direct Band Gap Silicon Allotropes

Elemental silicon has a large impact on the economy of the modern world and is of fundamental importance in the technological field, particularly in solar cell industry. The great demand of society for new clean energy and the shortcomings of the current silicon solar cells are calling for new materials that can make full use of the solar power. In this paper, six metastable allotropes of silicon with direct or quasidirect band gaps of 0.39-1.25 eV are predicted by ab initio calculations at ambient pressure. Five of them possess band gaps within the optimal range for high converting efficiency from solar energy to electric power and also have better optical properties than the Si-I phase. These Si structures with different band gaps could be applied to multiple p-n junction photovoltaic modules.

Three Dimensional Carbon-Nanotube Polymers

Eight fascinating sp(2)- and sp(3)-hybridized carbon allotropes have been uncovered using a newly developed ab initio particle-swarm optimization methodology for crystal structure prediction. These crystalline allotropes can be viewed respectively as three-dimensional (3D) polymers of (4,0), (5,0), (7,0), (8,0), (9,0), (3,3), (4,4), and (6,6) carbon nanotubes, termed 3D-(n, 0) or 3D-(n, n) carbons. The ground-state energy calculations show that the carbons all have lower energies than C(60) fullerene, and some are energetically more stable than the van der Waals packing configurations of their nanotube parents. Owing to their unique configurations, they have distinctive electronic properties, high Youngs moduli, high tensile strength, ultrahigh hardness, good ductility, and low density, and may be potentially applied to a variety of needs.

Superhard F-carbon predicted by ab initio particle-swarm optimization methodology

A simple (5 + 6 + 7)-sp(3) carbon (denoted as F-carbon) with eight atoms per unit cell predicted by a newly developed ab initio particle-swarm optimization methodology on crystal structure prediction is proposed. F-carbon can be seen as the reconstruction of AA-stacked or 3R-graphite, and is energetically more stable than 2H-graphite beyond 13.9 GPa. Band structure and hardness calculations indicate that F-carbon is a transparent superhard carbon with a gap of 4.55 eV at 15 GPa and a hardness of 93.9 GPa at zero pressure. Compared with the previously proposed Bct-, M- and W-carbons, the simulative x-ray diffraction pattern of F-carbon also well matches the superhard intermediate phase of the experimentally cold-compressed graphite. The possible transition route and energy barrier were observed using the variable cell nudged elastic band method. Our simulations show that the cold compression of graphite can produce some reversible metastable carbons (e.g. M- and F-carbons) with energy barriers close to diamond or lonsdaleite.

Compressed carbon nanotubes: A family of new multifunctional carbon allotropes

The exploration of novel functional carbon polymorphs is an enduring topic of scientific investigations. In this paper, we present simulations demonstrating metastable carbon phases as the result of pressure induced carbon nanotube polymerization. The configuration, bonding, electronic, and mechanical characteristics of carbon polymers strongly depend on the imposed hydrostatic/non-hydrostatic pressure, as well as on the geometry of the raw carbon nanotubes including diameter, chirality, stacking manner, and wall number. Especially, transition processes under hydrostatic/non-hydrostatic pressure are investigated, revealing unexpectedly low transition barriers and demonstrating sp2→sp3 bonding changes as well as peculiar oscillations of electronic property (e.g., semiconducting→metallic→semiconducting transitions). These polymerized nanotubes show versatile and superior physical properties, such as superhardness, high tensile strength and ductility, and tunable electronic properties (semiconducting or metallic).

Te‐Doped Black Phosphorus Field‐Effect Transistors

Element doping allows manipulation of the electronic properties of 2D materials. Enhanced transport performances and ambient stability of black-phosphorus devices by Te doping are presented. This provides a facile route for achieving airstable black-phosphorus devices.

First-principles study of O-BN: A sp3-bonding boron nitride allotrope

A fully tetrahedrally bonded boron nitride (BN) allotrope with an orthorhombic structure (O-BN) was investigated through first-principles calculations. O-BN has a bulk modulus of 371.8 GPa and a hardness of 66.4 GPa, thereby making it a superhard material with potential technological and industrial applications. O-BN becomes thermodynamically more stable than layered hexagonal BN (h-BN) at pressure above 1.5 GPa and is more favorable than the recently reported Pct-BN at any pressure. The phase transformations from h-BN and BN nanotubes to O-BN were respectively simulated, indicating the feasible synthesis of this superhard phase.