Zhixiong Zhu

Role of Ti and N in line pipe steel welds

Abstract High strength line pipe steels exhibit a combination of excellent toughness and high strength achieved through microalloy additions and thermomechanical controlled processing. During welding, severe thermal cycles experienced by the heat affected zone (HAZ) result in precipitate coarsening/dissolution and subsequent grain growth. This significantly reduces toughness in this region. It is well known that small Ti additions are utilised to control grain growth in the HAZ through grain boundary pinning action of TiN precipitates. Because of a lack of systematic and controlled study, it has been difficult to quantify the effect of TiN in the variety of steels. Hence, the optimum levels proposed in the literature are inconsistent and even contradict each other when compared. This paper mainly reviews the effect of different levels of Ti, N and Ti/N ratios on steels and pipes manufactured using different processes, with particular focus on the HAZ toughness.

The Effect of Chemical Composition on Microstructure and Properties of Intercritically Reheated Coarse-Grained Heat-Affected Zone in X70 Steels

The current study investigates the effect of different levels of Ti, N, and Ti/N ratios on microstructure and properties in the intercritically reheated coarse-grained heat-affected zone (ICCGHAZ) of two-pass submerged arc welds in API 5L grade X70 pipe. Gleeble simulation was employed to reproduce the ICCGHAZ of actual welds. Hardness and Charpy V-notch (CVN) tests were performed on the simulated samples. The microstructure of simulated ICCGHAZ was characterized by optical microscopy and scanning electron microscopy (SEM). LePera color etching technique was employed to identify and quantify the martensitic–austenitic (M–A) constituent. Results show that the simulated ICCGHAZ exhibited extremely low toughness, but in the studied range of Ti and N, there was no correlation with Ti/N ratio. The beneficial effect of near-stoichiometric Ti/N ratio observed in coarse-grained heat-affected zone (CGHAZ) did not translate to ICCGHAZ. This was because of the negative effect of the blocky M–A constituent formed on prior austenite grain boundaries.

Influence of Ti/N ratio on simulated CGHAZ microstructure and toughness in X70 steels

Abstract Three API 5L X70 steels with different Ti and N contents and otherwise identical chemistry were selected to investigate the effect of Ti/N ratio on the toughness in coarse grained heat affected zone (CGHAZ). A Gleeble 3500 thermomechanical simulator was used to simulate the thermal profile of CGHAZ of double submerged arc welding process. The microstructure was examined by optical microscopy. Statistics of CGHAZ grain coarsening were compiled by measuring the prior austenite grain size. Toughness of the simulated CGHAZ regions was evaluated by Charpy V-notch testing at −20 and −40°C. Morphology of the impact fracture surface was investigated using SEM. Steel B with Ti/N ratio of 3·22 (slightly below stoichiometric) showed slightly higher toughness in the simulated CGHAZ due to higher volume fraction of austenite grains less than 80 μm in diameter.

Control of Weld HAZ Properties in Modern High Strength Pipeline Steels

Critical performance of modern high strength linepipe is related to the ability of the steel to maintain mechanical properties in the weld heat affected zone (HAZ). The region most susceptible to mechanical property degradation is the coarse grained HAZ, however in multipass welds, the intercritically reheated CGHAZ (ICCGHAZ) also presents challenges to maintain toughness.Currently Ti is employed to minimise austenite grain coarsening through the grain boundary pinning action of TiN precipitates. This is effective because of the high thermal stability of TiN but control of the precipitate size distribution is very much dependent on alloy design and processing conditions to ensure final weld HAZ properties, particularly toughness. This can be difficult to maintain and alternative methods are required to further improve performance of the weldments.It is now evident that increased additions of Nb in modern high temperature processed (HTP) steels have demonstrated increased control of HAZ microstructures with improved fracture toughness [1, 2]. The present paper details the microstructure - property relationship of two pipe steel grades with different alloy designs. Evaluation of the critical CGHAZ was achieved by simulation techniques, calibrated using real weld thermal cycles, to determine the influence of alloy design and specifically level of Nb on weld zone properties.The results reveal that the fracture toughness of the simulated CGHAZ in the HTP steel is superior to that of a conventional microalloyed pipeline steel grade. Toughness was related to the distribution of martensite-austenite (M-A) constituent and the effective grain size which appeared to correspond to prior austenite grain size as evidenced by examination of cleavage facet size (CFS) on fractured Charpy specimens.Copyright

Microstructural characteristics and mechanical properties of bobbin-tool friction stir welded 2024–T3 aluminum alloy

Cold-rolled 2024–T3 sheet alloy was subjected to bobbin-tool friction stir welding (BTFSW). The microstructural characteristics and mechanical properties of the nugget zone in the as-welded state were investigated. The results show that the equiaxed grain size of BTFSW 2024–T3 alloy decreases from 7.6 to 2.8 μm as the welding speed is increased from 80 to 120 mm/min; in addition, fine grains are generated in the nugget zone and the size distribution is non-uniform. All Al2CuMg (S′) precipitates dissolve into the Al matrix, whereas Mn-rich phases confirmed as T phases (Al20Cu2Mn3, Al6Mn, or Al3Mn) remain unchanged. The optimized parameters for BTFSW are verified as the rotation speed of 350 r/min and the travel speed of 100 mm/min. The variations in precipitation and dislocation play more important roles than grain size in the nugget zone with respect to influencing the mechanical properties during the BTFSW process. After the BTFSW process, the fracture mode of base material 2024–T3 alloy transforms from ductile rupture to ductile-brittle mixed fracture.