Zhiyong Cai

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

Todays consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

Green synthesis of polyvinyl alcohol (PVA)–cellulose nanofibril (CNF) hybrid aerogels and their use as superabsorbents

Cross-linked polyvinyl alcohol (PVA)–cellulose nanofibril (CNF) hybrid organic aerogels were prepared using an environmentally friendly freeze-drying process. The resulting PVA/CNF aerogel was rendered both superhydrophobic and superoleophilic after being treated with methyltrichlorosilane via a simple thermal chemical vapor deposition process. Successful silanization on the surface of the porous aerogel was confirmed by various techniques including scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDS), Fourier transform infrared spectroscopy (FTIR), and contact angle measurements. The silane-treated, cross-linked PVA/CNF aerogels not only exhibited excellent absorption performance for various types of oils (e.g., crude oil) or organic solvents (with a typical weight gain ranging from 44 to 96 times of their own dry weight), but also showed a remarkable scavenging capability for several types of heavy metal ions tested (e.g., Pb2+, Hg2+), making them versatile absorbents for various potential applications including water purification. Furthermore, these PVA/CNF aerogels demonstrated excellent elasticity and mechanical durability after silane-treatment as evidenced by the cyclic compression tests.

Cellulose Nanofibril/Reduced Graphene Oxide/Carbon Nanotube Hybrid Aerogels for Highly Flexible and All-Solid-State Supercapacitors

A novel type of highly flexible and all-solid-state supercapacitor that uses cellulose nanofibril (CNF)/reduced graphene oxide (RGO)/carbon nanotube (CNT) hybrid aerogels as electrodes and H2SO4/poly(vinyl alcohol) (PVA) gel as the electrolyte was developed and is reported here. These flexible solid-state supercapacitors were fabricated without any binders, current collectors, or electroactive additives. Because of the porous structure of the CNF/RGO/CNT aerogel electrodes and the excellent electrolyte absorption properties of the CNFs present in the aerogel electrodes, the resulting flexible supercapacitors exhibited a high specific capacitance (i.e., 252 F g(-1) at a discharge current density of 0.5 A g(-1)) and a remarkable cycle stability (i.e., more than 99.5% of the capacitance was retained after 1000 charge-discharge cycles at a current density of 1 A g(-1)). Furthermore, the supercapacitors also showed extremely high areal capacitance, areal power density, and energy density (i.e., 216 mF cm(-2), 9.5 mW cm(-2), and 28.4 μWh cm(-2), respectively). In light of its excellent electrical performance, low cost, ease of large-scale manufacturing, and environmental friendliness, the CNF/RGO/CNT aerogel electrodes may have a promising application in the development of flexible energy-storage devices.

Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity

AbstractnThe effect of drying method on selected material properties of nanocellulose was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The thermal stability and crystallinity of the dried nanocellulose were evaluated using thermogravimetric analysis (TGA) and X-ray diffraction. Supercritical-drying produced NFCs with the least thermal stability and the lowest crystallinity index. Air-drying or spray-drying produced NFCs which were more thermally stable compared with freeze-dried NFCs. The CNCs dried by the three methods (air-drying, freeze-drying, and spray-drying) have similar onset temperature of thermal degradation. The different drying methods resulted in various char weight percentages at 600xa0°C for the dried NFCs or CNCs from TGA measurements. The dried NFCs are pure cellulose I while the dried CNCs consist of cellulose I and II. The calculated crystallinity indices differ with each drying method. The cellulose II content in CNCs changes as a function of drying method. For the application of nanocellulose in non polar thermoplastics, spray-dried products are recommended according to their higher thermal stability and higher crystallinity index.n

A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches

Various cellulose nanofibrils (CNFs) created by refining and microfluidization, in combination with enzymatic or 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized pretreatment were compared. The morphological properties, degree of polymerization, and crystallinity for the obtained nanofibrils, as well as physical and mechanical properties of the corresponding films were evaluated. Compared to refining, intense microfluidization contributed greater separation of nanofibril bundles, which led to an enhancement of mechanical strength and transparency for the resultant film. The selected enzymatic pre-treatments produced shortened fibers due to preferential hydrolysis of amorphous cellulose and, in combination with mechanical treatments, resulted in short and stiff cellulose nanocrystal (CNC)-like materials. Despite films from these CNC-like fibrils having inferior tensile strength, their tensile modulus and transparency were significantly improved compared to CNFs prepared without pre-treatment. The unique fiber morphology and high crystallinity potentially offer a green and ecologically friendly alternative for the preparation of CNCs and CNFs as part of an integrated biorefinery approach.

Polyvinyl Alcohol-Cellulose Nanofibrils-Graphene Oxide Hybrid Organic Aerogels

Hybrid organic aerogels consisting of polyvinyl alcohol (PVA), cellulose nanofibrils (CNFs), and graphene oxide nanosheets (GONSs) were prepared using an environmentally friendly freeze-drying process. The material properties of these fabricated aerogels were measured and analyzed using various characterization techniques including compression testing, scanning electron microscopy, thermogravimetric (TGA) analysis, Brunauer-Emmet-Teller (BET) surface area analysis, and contact angle measurements. These environmentally friendly, biobased hybrid organic aerogels exhibited a series of desirable properties including a high specific compressive strength and compressive failure strain, ultralow density and thermal conductivity, good thermal stability, and moisture resistance, making them potentially useful for a broad range of applications including thermal insulation.

Comparison of bamboo green, timber and yellow in sulfite, sulfuric acid and sodium hydroxide pretreatments for enzymatic saccharification

The response and behavior of bamboo green, timber, and yellow of moso bamboo (Phyllostachys heterocycla) to three pretreatments, sulfite (SPORL), dilute acid (DA), and alkali (NaOH), were investigated and compared with varied chemical loadings at 180°C for 30 min with a 6.25:1 (v/w) liquor-to-bamboo ratio. All the pretreatments improved the enzymatic digestibility of bamboo substrates. Under the investigated conditions, the DA pretreatment achieved better enzymatic digestibility, but had lower sugar recovery yield, and formed more fermentation inhibitors. The results suggested that the SPORL pretreatment be able to generate more readily digestible bamboo substrate with higher sugar yield and fewer fermentation inhibitors than the corresponding DA pretreatment if hemicelluloses are sufficiently removed by adding more acid to bring down the pretreatment pH. Bamboo timber had higher sugar content and better enzymatic digestibility and therefore was a better feedstock for bioconversion than bamboo green and yellow.

Poly(vinyl alcohol)/Cellulose Nanofibril Hybrid Aerogels with an Aligned Microtubular Porous Structure and Their Composites with Polydimethylsiloxane

Superhydrophobic poly(vinyl alcohol) (PVA)/cellulose nanofibril (CNF) aerogels with a unidirectionally aligned microtubular porous structure were prepared using a unidirectional freeze-drying process, followed by the thermal chemical vapor deposition of methyltrichlorosilane. The silanized aerogels were characterized using various techniques including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and contact angle measurements. The structure of the aerogels fully filled with polydimethylsiloxane (PDMS) was confirmed by SEM and optical microscopy. The mechanical properties of the resulting PDMS/aerogel composites were examined using both compressive and tensile tests. The compressive and tensile Youngs moduli of the fully filled PDMS/aerogel composites were more than 2-fold and 15-fold higher than those of pure PDMS. This study provides a novel alternative approach for preparing high performance polymer nanocomposites with a bicontinuous structure.

Microwave flexible transistors on cellulose nanofibrillated fiber substrates

In this paper, we demonstrate microwave flexible thin-film transistors (TFTs) on biodegradable substrates towards potential green portable devices. The combination of cellulose nanofibrillated fiber (CNF) substrate, which is a biobased and biodegradable platform, with transferrable single crystalline Si nanomembrane (Si NM), enables the realization of truly biodegradable, flexible, and high performance devices. Double-gate flexible Si NM TFTs built on a CNF substrate have shown an electron mobility of 160u2009cm2/V·s and fT and fmax of 4.9u2009GHz and 10.6u2009GHz, respectively. This demonstration proves the microwave frequency capability and, considering todays wide spread use of wireless devices, thus indicates the much wider utility of CNF substrates than that has been demonstrated before. The demonstration may also pave the way toward portable green devices that would generate less persistent waste and save more valuable resources.

Microwave Drying of Wood Strands

Abstract Characteristics of microwave drying of wood strands with different initial moisture contents and geometries were investigated using a commercial small microwave oven under different power inputs. Temperature and moisture changes along with the drying efficiency were examined at different drying scenarios. Extractives were analyzed using gas chromatography/mass spectrometry (GC/MS). The results showed that the microwave drying process consisted of three distinct periods (warm-up period, evaporation period, and heating-up period) during which the temperature, moisture change, and drying efficiency could vary. Most of the extractives were remnant during microwave drying. It was observed that with proper selections of power input, weight of drying material, and drying time, microwave drying could increase the drying rate, save up to 50% of energy consumption, and decrease volatile organic compound (VOC) emissions when compared with the conventional drying method.