Zhongshan Liu

Recent development of hybrid organic-silica monolithic columns in CEC and capillary LC

As an attractive alternative to organic and silica monoliths, hybrid organic–inorganic monolith somewhat combines the advantages of them, such as high surface area, excellent mechanical strength, and thermal stability. We have reviewed the preparation and application of hybrid monoliths in 2011 and 2013. The preparation approaches have been mainly summarized into three categories: (1) common sol–gel process using trialkoxysilanes and tetraalkoxysilanes as precursors; (2) “one‐pot” process of alkoxysilanes and organic monomers simultaneously via sol–gel chemistry and free radical polymerization; and (3) other polymerization of silane‐containing monomers. Herein, we would focus on the recent progress and development of preparation approaches, mainly covering the literatures since July of 2012. First, the direct synthesis approach of hybrid monoliths via sol–gel chemistry and following postmodification was an important route to fabricate various monolithic stationary phases, particularly, to modify the hybrid monoliths containing amino, epoxy, vinyl, and other groups. Second, “one‐pot” process, as a novel preparation approach of hybrid monoliths, was further developed in the past 2 years, in which various organic functional monomers, not only water‐soluble monomers, but also hydrophobic monomers could be added in the preparation system. Other polymerization techniques in the preparation of organic monolithic materials, particularly, free radical polymerization and ring‐opening polymerization, were successfully transferred to fabricate the hybrid monoliths by using silane‐containing monomers including POSS monomers or other self‐synthesized monomers.

Facile construction of macroporous hybrid monoliths via thiol-methacrylate Michael addition click reaction for capillary liquid chromatography

A facile approach based on thiol-methacrylate Michael addition click reaction was developed for construction of porous hybrid monolithic materials. Three hybrid monoliths were prepared via thiol-methacrylate click polymerization by using methacrylate-polyhedral oligomeric silsesquioxane (POSS) (cage mixture, n=8, 10, 12, POSS-MA) and three multi-thiol crosslinkers, 1,6-hexanedithiol (HDT), trimethylolpropane tris(3-mercaptopropionate) (TPTM) and pentaerythritol tetrakis(3-mercaptopropionate) (PTM), respectively, in the presence of porogenic solvents (n-propanol and PEG 200) and a catalyst (dimethylphenylphosphine, DMPP). The obtained monoliths possessed high thermal and chemical stabilities. Besides, they all exhibited high column efficiencies and excellent separation abilities in capillary liquid chromatography (cLC). The highest column efficiency could reach ca. 195,000N/m for butylbenzene on the monolith prepared with POSS-MA and TPTM (monolith POSS-TPTM) in reversed-phase (RP) mode at 0.64mm/s. Good chromatographic performance were all achieved in the separations of polycyclic aromatic hydrocarbons (PAHs), phenols, anilines, EPA 610 as well as bovine serum albumin (BSA) digest. The high column efficiencies in the range of 51,400-117,000N/m (achieved on the monolith POSS-PTM in RP mode) convincingly demonstrated the high separation abilities of these thiol-methacrylate based hybrid monoliths. All the results demonstrated the feasibility of the phosphines catalyzed thiol-methacrylate Michael addition click reaction in fabrication of monolithic columns with high efficiency for cLC applications.

Preparation of Monolithic Polymer Columns with Homogeneous Structure via Photoinitiated Thiol-yne Click Polymerization and Their Application in Separation of Small Molecules

Two monolithic polymer columns were directly prepared in the UV-transparent fused-silica capillaries via photoinitiated thiol-yne click polymerization of 1,7-octadiyne (ODY) with a dithiol (1,6-hexanedithiol, 2SH) or a tetrathiol (pentaerythriol tetrakis(3-mercaptopropionate), 4SH) within 15 min. The rapid polymerization provided a time-saving approach to optimize preparation conditions. Then, two porogenic systems of diethylene glycol diethyl ether (DEGDE)/tetrahydrofuran (THF) and DEGDE/poly(ethylene glycol) (PEG, Mn = 200) were found to effectively control the porous structure of two kinds of polymeric monoliths (O2SH and O4SH), respectively. The almost disappearance of thiol and alkynyl vibrations (2560 and 2115 cm(-1), respectively) in infrared spectra and Raman spectra indicated a high conversion of the thiol-yne polymerization reaction. The thiol-yne polymerization was further proved by analyzing the energy-dispersive X-ray spectrum (EDS), MALDI-TOF mass spectrum, and elemental data. Scanning electron microscopy (SEM) images showed the monolithic polymer columns with homogeneous porous structure and macropore size of 0.5-1.0 μm, which facilitated the minimum plate heights of 10.0-12.0 μm for alkylbenzenes in reversed-phase liquid chromatography (RPLC). The low values of the A and C terms (<1.0 μm and <15.5 ms, respectively) in the van Deemter equation were similar to those obtained by some monolithic silica columns. The BSA tryptic digest was also separated on the monolithic polymer column by cLC-MS/MS. The result with 85% protein coverage was better than those given by some hybrid monolithic columns. The monolithic polymer columns were further applied for separation of phenols, natural products, and standard proteins and demonstrated satisfactory separation ability.

Thiol-Epoxy Click Polymerization for Preparation of Polymeric Monoliths with Well-Defined 3D Framework for Capillary Liquid Chromatography

A facile approach was developed for direct preparation of organic monoliths via the alkaline-catalyzed thiol-epoxy click polymerization. Two organic monoliths were prepared by using tetraphenylolethane glycidyl ether as a multiepoxy monomer, and trimethylolpropane tris(3-mercaptopropionate) and pentaerythritol tetrakis(3-mercaptopropionate) as the multithiol monomer, respectively, in the presence of a ternary porogenic system (DMSO/PEG200/H2O). The obtained organic monoliths showed high thermal, mechanical and chemical stabilites. Benefiting from the step-growth polymerization process, two organic monoliths possessed well-defined 3D framework microstructure, and exhibited high permeabilities and column efficiencies in capillary liquid chromatography. A series of neutral, basic and acidic small molecules were used to comprehensively evaluate the separation abilities of these monoliths, and satisfactory chromatographic performance with column efficiencies ranged from 35,500 to 132,200 N/m was achieved, demonstrating good separation abilities of these organic monoliths prepared via thiol-epoxy click polymerization approach. Besides, multiple retention mechanisms, including hydrophobic, hydrophilic and π-π conjugate interactions were observed during the separation of analytes on these monoliths, which would make them promising for more extensive applications in capillary liquid chromatography.

Facile preparation of a stable and functionalizable hybrid monolith via ring-opening polymerization for capillary liquid chromatography

An organic-inorganic hybrid monolith was prepared by a single-step ring-opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS) with poly(ethylenimine) (PEI). The obtained hybrid monoliths possessed high ordered 3D skeletal microstructure with dual retention mechanism that exhibits reversed-phase (RP) mechanism under polar mobile phase and hydrophilic-interaction liquid chromatography (HILIC) retention mechanism under less polar mobile phase. The high column efficiencies of 110,000N/m can be achieved for separation of alkylbenzenes in capillary reversed-phase liquid chromatography (cLC). Due to the robust property of hybrid monolith and the rich primary and secondary amino groups on its surface, the resulting hybrid monolith was easily modified with γ-gluconolactone and physically coated with cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC), respectively. The former was successfully applied for HILIC separation of neutral, basic and acidic polar compounds as well as small peptides, and the latter for enantioseparation of racemates in cLC. The high column efficiencies were achieved in all of those separations. These results demonstrated that the hybrid monolith (POSS-PEI) possessed high stability and good surface tailorbility, potentially being applied for other research fields.

Fast preparation of a highly efficient organic monolith via photo-initiated thiol-ene click polymerization for capillary liquid chromatography

A novel organic monolith was firstly prepared in a UV-transparent fused-silica capillary by a single-step approach via photo-initiated thiol-ene click polymerization reaction of 1,2,4-trivinylcyclohexane (TVCH) and pentaerythriol tetra(3-mercaptopropionate) (4SH) within 10min. The effects of both composition of prepolymerization solution and polymerization time on the morphology and permeability of monolithic column were investigated in detail. Then, the optimal condition was acquired to fabricate a homogeneous and permeable organic monolith. The chemical groups of the monolithic column were confirmed by Fourier transform infrared spectroscopy (FT-IR). The SEM graphs showed the organic monolith possessed a uniform porous structure, which promotes the highest column efficiency of ∼133,000 plates per meter for alkylbenzenes at the linear velocity of 0.65mm/s in reversed-phase liquid chromatography. Finally, the organic monolithic column was further applied for separation of basic compounds, pesticides and EPA610, indicating satisfactory separation ability.

Preparation of polyhedral oligomeric silsesquioxane-based hybrid monolith by ring-opening polymerization and post-functionalization via thiol-ene click reaction

A polyhedral oligomeric silsesquioxane (POSS) hybrid monolith was simply prepared by using octaglycidyldimethylsilyl POSS (POSS-epoxy) and cystamine dihydrochloride as monomers via ring-opening polymerization. The effects of composition of prepolymerization solution and polycondensation temperature on the morphology and permeability of monolithic column were investigated in detail. The obtained POSS hybrid monolithic column showed 3D skeleton morphology and exhibited high column efficiency of ∼71,000 plates per meter in reversed-phase mechanism. Owing to this POSS hybrid monolith essentially possessing a great number of disulfide bonds, the monolith surface would expose thiol groups after reduction with dithiothreitol (DTT), which supplied active sites to functionalize with various alkene monomers via thiol-ene click reaction. The results indicated that the reduction with DTT could not destroy the 3D skeleton of hybrid monolith. Both stearyl methylacrylate (SMA) and benzyl methacrylate (BMA) were selected to functionalize the hybrid monolithic columns for reversed-phase liquid chromatography (RPLC), while [2-(methacryloyloxy)ethyl]-dimethyl-(3-sulfopropyl)-ammonium hydroxide (MSA) was used to modify the hybrid monolithic column in hydrophilic interaction chromatography (HILIC). These modified hybrid monolithic columns could be successfully applied for separation of small molecules with high efficiency. It is demonstrated that thiol-ene click reaction supplies a facile way to introduce various functional groups to the hybrid monolith possessing thiol groups. Furthermore, due to good permeability of the resulting hybrid monoliths, we also prepared long hybrid monolithic columns in narrow-bore capillaries. The highest column efficiency reached to ∼70,000 plates using a 1-m-long column of 75μm i.d. with a peak capacity of 147 for isocratic chromatography, indicating potential application in separation and analysis of complex biosamples.

Separation of intact proteins by using polyhedral oligomeric silsesquioxane based hybrid monolithic capillary columns.

High-efficient separation of intact proteins is still a huge challenge in proteome analysis of complex biological samples by using capillary columns. In this study, four POSS-based hybrid monolithic capillary columns were prepared and applied in nano-flow liquid chromatography (Nano-LC) separation of intact proteins. It was observed that the POSS-based hybrid monolithic columns exhibit high permeability, good LC separation reproducibility and column efficiency for intact protein separation. The effects of different LC separation conditions such as flow rate, gradient steepness, column length and mobile phase additives on the LC separation efficiency of the POSS-based hybrid monolithic column were systematically examined. Finally, fast LC separation of 7 proteins mixture was realized in 2.5 min by using the optimized conditions on the 100 μm i.d. POSS-based hybrid monolithic capillary column.

Preparation of well-controlled three-dimensional skeletal hybrid monoliths via thiol-epoxy click polymerization for highly efficient separation of small molecules in capillary liquid chromatography

Two kinds of hybrid monoliths were first prepared via thiol-epoxy click polymerization using a multi-epoxy monomer, octaglycidyldimethylsilyl POSS (POSS-epoxy), and two multi-thiols, trimethylolpropanetris(3-mercaptopropionate) (TPTM) and pentaerythritoltetrakis(3-mercaptopropionate) (PTM), respectively, as the precursors. The resulting two hybrid monoliths (assigned as POSS-epoxy-TPTM and POSS-epoxy-PTM) not only possessed high thermal, mechanical and chemical stabilities, but also exhibited well-controlled 3D skeletal microstructure and high efficiency in capillary liquid chromatography (cLC) separation of small molecules. The highest column efficiency reached 182,700N/m (for butylbenzene) on the monolith POSS-epoxy-PTM at the velocity of 0.75mm/s. Furthermore, the hybrid monolith POSS-epoxy-PTM was successfully applied for cLC separations of various samples, not only standard compounds such as alkylbenzenes, PAHs, phenols and dipeptides, as well as intact proteins, but also complex samples of EPA 610 and BSA digest.

A novel polymeric monolith prepared with multi-acrylate crosslinker for retention-independent efficient separation of small molecules in capillary liquid chromatography.

Low column efficiency for small molecules in reversed-phase chromatography is a major problem commonly encountered in polymer-based monoliths. Herein, a novel highly crosslinked porous polymeric monolith was in situ prepared by using a multi-acrylate monomer, dipentaerythritol penta-/hexa-acrylate (DPEPA), as crosslinker, which copolymerized with lauryl methacrylate (LMA) as functional monomer in a UV-transparent fused-silica capillary via photo-initiated free-radical polymerization within 5 min. The mechanical stability and permeability of the resulting poly(LMA-co-DPEPA) monolith were characterized in detail. One series of highly crosslinked poly(LMA-co-DPEPA) columns were prepared with relatively higher content of crosslinker (63.3%) in the precursor. Although they exhibited lower permeability, high column efficiency for alkylbenzenes was acquired in cLC, and the minimum plate height (column B) was in the range of 6.04-9.00 μm, corresponding to 111,000-165,000 N m(-1). Meanwhile, another series of poly(LMA-co-DPEPA) columns prepared with relatively lower content of crosslinker (52.7%) in the precursor exhibited higher permeability, but the minimum plate height (column E) was relatively low in the range of 10.75-20.04 μm for alkylbenzenes, corresponding to 50,000-93,000 N m(-1). Compared with common poly(LMA-co-EDMA) columns previously reported, the highly crosslinked poly(LMA-co-DPEPA) columns using a multi-acrylate monomer as crosslinker possessed remarkably high column efficiency for small molecules in cLC. By plotting of plate height (H) of alkylbenzenes versus the linear velocity (u) of mobile phase, the results revealed a retention-independent efficient performance of small molecules in the isocratic elution, indicating that the use of multi-functional crosslinker possibly prevents the generation of gel-like micropores in the poly(LMA-co-DPEPA) monolith, reducing the mass transfer resistance (C-term).