an Zhu

Atomic cobalt on nitrogen-doped graphene for hydrogen generation

Reduction of water to hydrogen through electrocatalysis holds great promise for clean energy, but its large-scale application relies on the development of inexpensive and efficient catalysts to replace precious platinum catalysts. Here we report an electrocatalyst for hydrogen generation based on very small amounts of cobalt dispersed as individual atoms on nitrogen-doped graphene. This catalyst is robust and highly active in aqueous media with very low overpotentials (30 mV). A variety of analytical techniques and electrochemical measurements suggest that the catalytically active sites are associated with the metal centres coordinated to nitrogen. This unusual atomic constitution of supported metals is suggestive of a new approach to preparing extremely efficient single-atom catalysts.

Efficient hydrogen evolution by ternary molybdenum sulfoselenide particles on self-standing porous nickel diselenide foam

With the massive consumption of fossil fuels and its detrimental impact on the environment, methods of generating clean power are urgent. Hydrogen is an ideal carrier for renewable energy; however, hydrogen generation is inefficient because of the lack of robust catalysts that are substantially cheaper than platinum. Therefore, robust and durable earth-abundant and cost-effective catalysts are desirable for hydrogen generation from water splitting via hydrogen evolution reaction. Here we report an active and durable earth-abundant transition metal dichalcogenide-based hybrid catalyst that exhibits high hydrogen evolution activity approaching the state-of-the-art platinum catalysts, and superior to those of most transition metal dichalcogenides (molybdenum sulfide, cobalt diselenide and so on). Our material is fabricated by growing ternary molybdenum sulfoselenide particles on self-standing porous nickel diselenide foam. This advance provides a different pathway to design cheap, efficient and sizable hydrogen-evolving electrode by simultaneously tuning the number of catalytic edge sites, porosity, heteroatom doping and electrical conductivity.

Outstanding hydrogen evolution reaction catalyzed by porous nickel diselenide electrocatalysts

To relieve our strong reliance on fossil fuels and to reduce greenhouse effects, there is an ever-growing interest in using electrocatalytic water splitting to produce green, renewable, and environment-benign hydrogen fuel via the hydrogen evolution reaction. For commercially feasible water electrolysis, it is imperative to develop electrocatalysts that perform as efficiently as Pt but using only earth-abundant commercial materials. However, the highest performance current catalysts consist of nanostructures made by using complex methods. Here we report a porous nickel diselenide (NiSe2) catalyst that is superior for water electrolysis, exhibiting much better catalytic performance than most first-row transition metal dichalcogenide-based catalysts, well-studied MoS2, and WS2-based catalysts. Indeed NiSe2 performs comparably to the state-of-the-art Pt catalysts. We fabricate NiSe2 directly from commercial nickel foam by acetic acid-assisted surface roughness engineering. To understand the origin of the high performance, we use first-principles calculations to identify the active sites. This work demonstrates the commercial possibility of hydrogen production via water electrolysis using porous bulk NiSe2 catalysts.

Higher thermoelectric performance of Zintl phases (Eu0.5Yb0.5)1-xCaxMg2Bi2 by band engineering and strain fluctuation.

Significance The search for high-efficiency thermoelectric materials encompasses many classes of semiconductors. Zintl phases are attractive thermoelectric materials for thermoelectric applications. Here, we report the high thermoelectric performance of the rarely studied bismuth (Bi)-based Zintl phases (Eu0.5Yb0.5)1−xCaxMg2Bi2 with the record figure-of-merit ZT as high as 1.3 at 873 K. This ZT value is, to our knowledge, the highest ever reported in CaAl2Si2-based structures, especially compared with the best antimony (Sb)-based YbZn0.4Cd1.6Sb2 compound. Because Sb-based Zintl compounds have been studied for many decades, this Bi-based Zintl phase with high thermoelectric properties could be a good thermoelectric material candidate in the future. Complex Zintl phases, especially antimony (Sb)-based YbZn0.4Cd1.6Sb2 with figure-of-merit (ZT) of ∼1.2 at 700 K, are good candidates as thermoelectric materials because of their intrinsic “electron–crystal, phonon–glass” nature. Here, we report the rarely studied p-type bismuth (Bi)-based Zintl phases (Ca,Yb,Eu)Mg2Bi2 with a record thermoelectric performance. Phase-pure EuMg2Bi2 is successfully prepared with suppressed bipolar effect to reach ZT ∼ 1. Further partial substitution of Eu by Ca and Yb enhanced ZT to ∼1.3 for Eu0.2Yb0.2Ca0.6Mg2Bi2 at 873 K. Density-functional theory (DFT) simulation indicates the alloying has no effect on the valence band, but does affect the conduction band. Such band engineering results in good p-type thermoelectric properties with high carrier mobility. Using transmission electron microscopy, various types of strains are observed and are believed to be due to atomic mass and size fluctuations. Point defects, strain, dislocations, and nanostructures jointly contribute to phonon scattering, confirmed by the semiclassical theoretical calculations based on a modified Debye–Callaway model of lattice thermal conductivity. This work indicates Bi-based (Ca,Yb,Eu)Mg2Bi2 is better than the Sb-based Zintl phases.

Steric and Electronic Influence of Aryl Isocyanides on the Properties of Iridium(III) Cyclometalates.

Cyclometalated iridium complexes with efficient phosphorescence and good electrochemical stability are important candidates for optoelectronic devices. Isocyanide ligands are strong-field ligands: when attached to transition metals, they impart larger HOMO-LUMO energy gaps, engender higher oxidative stability at the metal center, and support rugged organometallic complexes. Aryl isocyanides offer more versatile steric and electronic control by selective substitution at the aryl ring periphery. Despite a few reports of alkyl isocyanide of cyclometalated iridium(III), detailed studies on analogous aryl isocyanide complexes are scant. We report the synthesis, photophysical properties, and electrochemical properties of 11 new luminescent cationic biscyclometalated bis(aryl isocyanide)iridium(III) complexes. Three different aryl isocyanides--2,6-dimethylphenyl isocyanide (CNAr(dmp)), 2,6-diisopropylphenyl isocyanide (CNAr(dipp)), and 2-naphthyl isocyanide (CNAr(nap))--were combined with four cyclometalating ligands with differential π-π* energies--2-phenylpyridine (ppy), 2,4-difluorophenylpyridine (F2ppy), 2-benzothienylpyridine (btp), and 2-phenylbenzothiazole (bt). Five of them were crystallographically characterized. All new complexes show wide redox windows, with reduction potentials falling in a narrow range of -2.02 to -2.37 V and oxidation potentials spanning a wider range of 0.97-1.48 V. Efficient structured emission spans from the blue region for [(F2ppy)2Ir(CNAr)2]PF6 to the orange region for [(btp)2Ir(CNAr)2]PF6, demonstrating that isocyanide ligands can support redox-stable luminescent complexes with a range of emission colors. Emission quantum yields were generally high, reaching a maximum of 0.37 for two complexes, whereas btp-ligated complexes had quantum yields below 1%. The structure of the CNAr ligand has a minimal effect on the photophysical properties, which are shown to arise from ligand-centered excited states with very little contribution from metal-to-ligand charge transfer in most cases.

Surface defection reduces cytotoxicity of Zn(2-methylimidazole)2 (ZIF-8) without compromising its drug delivery capacity

Zn(2-methylimidazole)2 (ZIF-8), as one of the most important metal-organic framework (MOF) molecules, is a promising candidate for drug delivery due to its low-density structure, high surface area, and tunable frameworks. However, ZIF-8 exhibits a high cytotoxicity associated with its external hydrophobic surface, which significantly restricts its application in drug delivery and other biomedical applications. Commonly used chemical functionalization methods would convert the hydrophobic surface of ZIF-8 to hydrophilic, but the generated functional groups on its internal surface may reduce its pore sizes or even block its pores. Herein, a surface defection strategy was applied on the external surface of ZIF-8 to enhance its hydrophilicity without reducing or blocking the internal pores. In this approach, mechanical ball-milling was used to incur defects on the external surface of ZIF-8, leading to unsaturated Zn-sites and N-sites which subsequently bound H2O molecules in an aqueous environment. Furthermore, hydroxyurea delivery and cell cytotoxicity of ZIF-8 with and without the external surface treatment were evaluated. It was found that 5-min ball milling changed the hydrophobic-hydrophilic balance of ZIF-8, resulting in significantly higher cell viability without compromising its hydroxyurea loading and release capacity. Such a simple mechanical ball-milling followed by water-treatment provides a general technique for surface-modification of other MOF molecules, which will undoubtedly magnify their biomedical applications.

Orientation Control of Graphene Flakes by Magnetic Field: Broad Device Applications of Macroscopically Aligned Graphene

Owing to a large diamagnetism, graphene flakes can respond and be aligned to magnetic field like a ferromagnetic material. Aligned graphene flakes exhibit emergent properties approaching single-layer graphene. Anisotropic optical properties also give rise to a magnetic writing board using graphene suspension and a bar magnet as a pen. This simple alignment technique opens up enormous applications of graphene.

Excitonic Resonant Emission–Absorption of Surface Plasmons in Transition Metal Dichalcogenides for Chip-Level Electronic–Photonic Integrated Circuits

The monolithic integration of electronics and photonics has attracted enormous attention due to its potential applications. A major challenge to this integration is the identification of suitable materials that can emit and absorb light at the same wavelength. In this paper we utilize unique excitonic transitions in WS2 monolayers and show that WS2 exhibits a perfect overlap between its absorption and photoluminescence spectra. By coupling WS2 to Ag nanowires, we then show that WS2 monolayers are able to excite and absorb surface plasmons of Ag nanowires at the same wavelength of exciton photoluminescence. This resonant absorption by WS2 is distinguished from that of the ohmic propagation loss of silver nanowires, resulting in a short propagation length of surface plasmons. Our demonstration of resonant optical generation and detection of surface plasmons enables nanoscale optical communication and paves the way for on-chip electronic–photonic integrated circuits.

Fast detection and low power hydrogen sensor using edge-oriented vertically aligned 3-D network of MoS2 flakes at room temperature

The increased usage of hydrogen as a next generation clean fuel strongly demands the parallel development of room temperature and low power hydrogen sensors for their safety operation. In this work, we report strong evidence for preferential hydrogen adsorption at edge-sites in an edge oriented vertically aligned 3-D network of MoS2 flakes at room temperature. The vertically aligned edge-oriented MoS2 flakes were synthesised by a modified CVD process on a SiO2/Si substrate and confirmed by Scanning Electron Microscopy. Raman spectroscopy and PL spectroscopy reveal the signature of few-layer MoS2 flakes in the sample. The sensors performance was tested from room temperature to 150 °C for 1% hydrogen concentration. The device shows a fast response of 14.3 s even at room temperature. The sensitivity of the device strongly depends on temperature and increases from ∼1% to ∼11% as temperature increases. A detail hydrogen sensing mechanism was proposed based on the preferential hydrogen adsorption at MoS2 edge ...

Laser streaming: Turning a laser beam into a flow of liquid

New optofluidic coupling of photoacoustics to acoustic streaming enables laser-driven jet flow via plasmonic-acoustic cavity. Transforming a laser beam into a mass flow has been a challenge both scientifically and technologically. We report the discovery of a new optofluidic principle and demonstrate the generation of a steady-state water flow by a pulsed laser beam through a glass window. To generate a flow or stream in the same path as the refracted laser beam in pure water from an arbitrary spot on the window, we first fill a glass cuvette with an aqueous solution of Au nanoparticles. A flow will emerge from the focused laser spot on the window after the laser is turned on for a few to tens of minutes; the flow remains after the colloidal solution is completely replaced by pure water. Microscopically, this transformation is made possible by an underlying plasmonic nanoparticle-decorated cavity, which is self-fabricated on the glass by nanoparticle-assisted laser etching and exhibits size and shape uniquely tailored to the incident beam profile. Hydrophone signals indicate that the flow is driven via acoustic streaming by a long-lasting ultrasound wave that is resonantly generated by the laser and the cavity through the photoacoustic effect. The principle of this light-driven flow via ultrasound, that is, photoacoustic streaming by coupling photoacoustics to acoustic streaming, is general and can be applied to any liquid, opening up new research and applications in optofluidics as well as traditional photoacoustics and acoustic streaming.