Zhuo Yuqun

The development of pollution control technology in coal combustion in China

The recent development of coal combustion pollution control technologies in China, including desulphurization, denitrification, particulate matters and heavy metals emission control technologies, have been reviewed. The development histories and the advantages of China’s self-developed technologies have been introduced in detail. The key points of future research and development in coal combustion pollution control, e.g., combined emission control and CO2 emission control technologies, have also been discussed.

Study on Fine Particles Influence on Sodium Sulfite and Oxygen Gas-Liquid Reaction

Wet limestone scrubbing is the most common flue gas desulfurization process for control of sulfur dioxide emissions from the combustion of fossil fuels, and forced oxidation is a key part of the reaction. During the reaction which controlled by gas-liquid mass transfer, the fine particles’ characteristic, size, solid loading and temperature has a great influence on gas-liquid mass transfer. In the present work is to explain how these factors influence the reaction between Na2SO3 and O2 and find the best react conditions through experiment. The oxidation rate was experimentally studied by contacting pure oxygen with a sodium sulfite solution with active carbon particle in a stirred tank, and the system pressure drop was record by the pressure sensor. At the beginning the pressure is about 215 kPa and Na2SO3 is about 0.5mol/L. The temperature is 40, 50, 60, 70, 80°C. Compare the results of no particles included, we can conclude that high temperature, proper loadings and smaller particles resulting in higher mass transfer coefficients k L .

The Chemical Transformation of Calcium in Shenhua Coal During Combustion in a Muffle Furnace

The chemical reaction characteristics of calcium in three samples of Shenhua coal, i.e. raw sample, hydrochloric acid washed sample and hydrochloric acid washed light fraction, during combustion in a muffle furnace have been investigated in this paper. Ca is bound by calcite and organic matter in Shenhua coal. X ray diffraction (XRD) phase analysis has been conducted to these samples’ combustion products obtained by heating at different temperatures. It has been found that the organically-bound calcium could easily react with clays and transform into gehlenite and anorthite partially if combusted under 815°C, whilst the excluded minerals promoted the conversion of gehlenite to anorthite. Calcite in Shenhua coal decomposed into calcium oxide and partially transformed into calcium sulfate under 815°C, and formed gehlenite and anorthite under 1,050°C. Calcite and other HCl-dissolved minerals in Shenhua coal were responsible mainly for the characteristic that the clay minerals in Shenhua coal hardly became mullite during combustion.