Zulfiqar Ali

Multifunctional g-C3N4 nanofibers: A template-free fabrication and enhanced optical, electrochemical, and photocatalyst properties

We have developed a facile, scale up, and efficient method for the preparation of graphitic-C3N4 nanofibers (GCNNFs) as electrodes for supercapacitors and photocatalysts. The as-synthesized GCNNFs have 1D structure with higher concentration of nitrogen that is favorable for higher conductivity and electrochemical performance. Secondly, the high surface area of GCNNF provides a large electrode-electrolyte contact area, sufficient light harvesting and mass transfer, as well as increased redox potential. Thus, the GCNNF supercapacitor electrode shows high capacitance of 263.75 F g(-1) and excellent cyclic stability in 0.1 M Na2SO4 aqueous electrolyte with the capacitance retention of 93.6% after 2000 cycles at 1 A g(-1) current density. GCNNFs exhibit high capacitance of 208 F g(-1) even at 10 A g(-1), with the appreciable capacitance retention of 89.5%, which proves its better rate capability. Moreover, the GCNNF shows enhanced photocatalytic activity in the photodegradation of RhB in comparison to the bulk graphitic-C3N4 (GCN). The degradation rate constant of GCNNF photocatalyst is almost 4 times higher than GCN. The enhanced photocatalytic activity of GCNNF is mainly due to the higher surface area, appropriate bandgap, and fewer defects in GCNNF as compared to GCN. As an economical precursor (melamine) and harmless, facile, and template-free synthesis method with excellent performance both in supercapacitors and in photodegradation, GCNNF is a strong candidate for energy storage and environment protection applications.

Genome-Wide Sequence Characterization and Expression Analysis of Major Intrinsic Proteins in Soybean (Glycine max L.)

Water is essential for all living organisms. Aquaporin proteins are the major facilitator of water transport activity through cell membranes of plants including soybean. These proteins are diverse in plants and belong to a large major intrinsic (MIP) protein family. In higher plants, MIPs are classified into five subfamilies including plasma membrane intrinsic proteins (PIP), tonoplast intrinsic proteins (TIP), NOD26-like intrinsic proteins (NIP), small basic intrinsic proteins (SIP), and the recently discovered X intrinsic proteins (XIP). This paper reports genome wide assembly of soybean MIPs, their functional prediction and expression analysis. Using a bioinformatic homology search, 66 GmMIPs were identified in the soybean genome. Phylogenetic analysis of amino acid sequences of GmMIPs divided the large and highly similar multi-gene family into 5 subfamilies: GmPIPs, GmTIPs, GmNIPs, GmSIPs and GmXIPs. GmPIPs consisted of 22 genes and GmTIPs 23, which showed high sequence similarity within subfamilies. GmNIPs contained 13 and GmSIPs 6 members which were diverse. In addition, we also identified a two member GmXIP, a distinct 5th subfamily. GmMIPs were further classified into twelve subgroups based on substrate selectivity filter analysis. Expression analyses were performed for a selected set of GmMIPs using semi-quantitative reverse transcription (semi-RT-qPCR) and qPCR. Our results suggested that many GmMIPs have high sequence similarity but diverse roles as evidenced by analysis of sequences and their expression. It can be speculated that GmMIPs contains true aquaporins, glyceroporins, aquaglyceroporins and mixed transport facilitators.

Synthesis of novel ZnV2O4 hierarchical nanospheres and their applications as electrochemical supercapacitor and hydrogen storage material

Hierarchical nanostructures (Hs) have recently garnered enormous attention due to their remarkable performances in catalysis, electronic devices, energy storage and conversion. Considering the advantage of hierarchical nanostructures, we have formulated a facile and template free method to synthesize novel hierarchical nanospheres (NHNs) of ZnV2O4. Both zinc and vanadium are earth abundant, relatively economical and can offer several oxidation states, which can render a broad range of redox reactions favorable for electrochemical energy storage applications. Keeping these points in mind, we investigated for the first time the electrochemical supercapacitor performance of NHNs. The electrochemical measurements were performed in 2 M KOH solution. The measured specific capacitance of ZnV2O4 electrode is 360 F/g at 1 A/g with good stability and retention capacity of 89% after 1000 cycles. Moreover, the hydrogen storage properties of NHNs were measured at 473, 573, and 623 K with an absorption of 1.76, 2.03, and 2.49 wt %. respectively. These studies pave the way to consider ZnV2O4 as prospective material for energy storage applications.

Large scale production of novel g-C3N4 micro strings with high surface area and versatile photodegradation ability

An easy, scalable and environmentally benign chemical method has been developed to synthesize micro strings of graphitic-C3N4 (msg-C3N4) through pre-treatment of melamine with HNO3 in alkaline solvent at low temperature. This methodology results in a unique string type morphology of msg-C3N4 with higher surface area. These msg-C3N4 micro strings were used as a photocatalyst under visible light for photodegradation of rhodamine B, methyl blue and methyl orange. The msg-C3N4 shows enhanced photodegradation efficiency due to its high surface area and favourable bandgap. The first order rate constant for msg-C3N4 was measured which confirms the higher performance of msg-C3N4 in comparison to other reported materials such as g-C3N4, Fe2O3/g-C3N4 and TiO2 nanotubes. Thus, the method developed here is favourable for the synthesis of materials with higher surface area and unique morphology, which are favourable for high photodegradation activity.

Template free synthesis of CuS nanosheet-based hierarchical microspheres: an efficient natural light driven photocatalyst

Well controlled nanosheets-based hierarchical microspheres (NSHMS) of pure covellite phase CuS were synthesized using a facile PVP assisted solvothermal process. The reaction conditions were optimized using various amounts of PVP to develop unique hierarchical structured hollow microspheres. CuS hollow structures have a bandgap of ~1.97 eV. These mesoporous structures exhibit excellent photocatalytic activity in degradation of organic dyes (Methylene Blue) under natural light in comparison to other structures of copper sulphide. These photocatalysts show extraordinary reusability with over 96.5% degradation of organic dye after 6th cycle. A “bottom-up” assembly was successfully developed to synthesize hollow microspheres with unique and well defined architectures at large scale, which offer a good opportunity to understand the fundamental significance of unusual and complex hierarchical structures for their potential applications.

Enhanced electrochemical performance of ball milled CoO for supercapacitor applications

In the present work, we report the enhanced electrochemical performance of ball milled CoO nanoparticles for supercapacitor applications. The mechanical ball milling provides clean physical processes to prepare nanoparticles from CoO micropowders for excellent electrochemical performances. The performances of CoO samples at different milling times have been researched. With the increase of milling time the specific capacitance of CoO samples increases. The average size of CoO nanoparticles which have been milled for 96 h is estimated to be 5–20 nm by Transmission Electron Microscopy (TEM) analysis showing clear edges having superior boundary crystallinity. This clear edge superior boundary crystalline shape favours rapid electron and ion transport. The electrochemical behaviour is analyzed in a three electrode system using 1 M KOH solution as the electrolyte in terms of cyclic voltammetry, cyclic charge–discharge, and electrochemical impedance spectra. The CoO nanoparticle electrode exhibits a specific capacitance of 600 F g−1 at 0.5 A g−1 constant discharge current density. The high specific capacitance and the stability of the CoO nanoparticle electrode are attributed to good crystallinity and large specific surface area. The specific capacity retention is 96.6% at a current density of 2 A g−1 and 95.3% at a current density of 4 A g−1 over 2000 charge–discharge cycles. The excellent cyclic stability indicates that nanocrystalline CoO is an excellent supercapacitor electrode material.

Synthesis of CuS flowers exhibiting versatile photo-catalyst response

Hierarchically structured covellite copper sulfide (CuS) microflowers composed of nanosheets have been successfully fabricated via a one-pot sonochemical process, using copper sulfate and thiourea aqueous solution as precursors in the presence of citric acid, without any prefabricated template. Large-scaled architectures are homogeneous and quite separately displaced and assembled by pure hexagonal single-crystalline CuS nanosheets, having thickness within 20 nm. The as obtained hierarchical CuS structures possess rather high surface area and unique double pore size distributions measured from N2 adsorption isotherms. Moreover, a possible growth mechanism for the CuS hierarchical architectures is proposed on the basis of temporal evolution controlled experiments. Most importantly, these hierarchically structured CuS catalysts showed highly efficient and versatile photo-catalytic activities as well as excellent recyclability in degrading highly concentrated dye aqueous solutions of methylene blue (MB), rhodamine B (RhB) and their mixed solution (MB + RhB) with the help of hydrogen peroxide (H2O2) under natural light irradiation, suggesting a promising application in wastewater purification.

The synergistic effect between WO3 and g-C3N4 towards efficient visible-light-driven photocatalytic performance

We have developed a facile, scaled up, efficient and morphology-based novel WO3–g-C3N4 photocatalyst with different mass ratios of WO3 and g-C3N4. It was used for the photodegradation of rhodamine B (RhB) under visible light irradiation and it showed excellent enhanced photocatalytic efficiency as compared to pure g-C3N4 and WO3. The apparent performance of the composite/hybrid was 3.65 times greater than pure WO3 and 3.72 times greater than pure g-C3N4 respectively, and it was also found to be much higher than the previously reported ones. Furthermore, the optical properties of composite samples were evaluated. The bandgap of composite samples lies in the range of 2.3–2.5 eV, which was favourable for photodegradation. The possible mechanism for enhanced catalytic efficiency of the WO3–g-C3N4 photocatalyst is discussed in detail. It was found that the enhanced performance is due to the synergistic effect between the WO3 and g-C3N4 interface, improved optical absorption in the visible region and suitable band positions of WO3–g-C3N4 composites.

Synthesis of mid-infrared SnSe nanowires and their optoelectronic properties

For the first time, high quality SnSe nanowires were synthesized via chemical vapour deposition (CVD). The synthesized SnSe nanowires are single crystalline. The length of the nanowires is in tens of microns with an average diameter of about 30–40 nm. Further, the optical and electrical properties reveal the potential of SnSe nanowires for photovoltaic and optical devices. These studies will enable significant advancements of the next generation photodetection and solar cell applications.

Facile synthesis of novel Nb3O7F nanoflowers, their optical and photocatalytic properties

Novel nanoflowers (NNF) of Nb3O7F have been synthesized by a facile template free route without using any surfactant. The evolution of these NNF have been studied by varying different reaction parameters. Using the UV-Vis spectra absorption peak the calculated bandgap was 2.9 eV. Organic dye rhodamine B (RhB) was degraded with average photodegradation efficiency of 87.8%, 94.23% and 99.7% with higher rate constant k = 1.1559, 1.9011 and 3.8862 for 0.005 g, 0.01 g and 0.1 g respectively. The rate constant for 0.1 g was found to be larger than for Nb2O5, commercial TiO2 Degussa P25, carbon modified Nb2O5/TiO2, g-C3N4, Fe2O3/g-C3N4 composites and SnNb2O6.