A. G. Bengough

Can root electrical capacitance be used to predict root mass in soil

BACKGROUND Electrical capacitance, measured between an electrode inserted at the base of a plant and an electrode in the rooting substrate, is often linearly correlated with root mass. Electrical capacitance has often been used as an assay for root mass, and is conventionally interpreted using an electrical model in which roots behave as cylindrical capacitors wired in parallel. Recent experiments in hydroponics show that this interpretation is incorrect and a new model has been proposed. Here, the new model is tested in solid substrates. METHODS The capacitances of compost and soil were determined as a function of water content, and the capacitances of cereal plants growing in sand or potting compost in the glasshouse, or in the field, were measured under contrasting irrigation regimes. KEY RESULTS Capacitances of compost and soil increased with increasing water content. At water contents approaching field capacity, compost and soil had capacitances at least an order of magnitude greater than those of plant tissues. For plants growing in solid substrates, wetting the substrate locally around the stem base was both necessary and sufficient to record maximum capacitance, which was correlated with stem cross-sectional area: capacitance of excised stem tissue equalled that of the plant in wet soil. Capacitance measured between two electrodes could be modelled as an electrical circuit in which component capacitors (plant tissue or rooting substrate) are wired in series. CONCLUSIONS The results were consistent with the new physical interpretation of plant capacitance. Substrate capacitance and plant capacitance combine according to standard physical laws. For plants growing in wet substrate, the capacitance measured is largely determined by the tissue between the surface of the substrate and the electrode attached to the plant. Whilst the measured capacitance can, in some circumstances, be correlated with root mass, it is not a direct assay of root mass.

A new physical interpretation of plant root capacitance

Capacitance has been used as a non-destructive measure of root system size for 30 years. The equipment required is cheap and simple to apply in both field and laboratory. Good linear correlations have been reported between capacitance and root mass. A model by F. N. Dalton, predicting a linear relationship between these two variables, has become accepted widely. This model was tested for barley (Hordeum vulgare) grown hydroponically using treatments that included: raising roots out of solution, cutting roots at positions below the solution surface, and varying the distance between plant electrode and the solution surface. Although good linear correlations were found between capacitance and mass for whole root systems, when roots were raised out of solution capacitances were not linearly related to submerged root mass. Excision of roots in the solution had negligible effect on the measured capacitance. These latter observations conflict with Dalton’s model. Capacitance correlated linearly with the sum of root cross-sectional areas at the solution surface and inversely with distance between plant electrode and solution surface. A new model for capacitance is proposed that is consistent with these observations.

Resistance of simple plant root systems to uplift loads

Plant root systems frequently permeate both natural and engineered soil slopes, influencing slope stability via mechanical reinforcement and soil drying. These root systems are often loaded by external forces during slope movements and when plant stems are subject to animal foraging or wind gusts. A series of physical model tests were conducted to examine how root geometries, root properties, and soil effective stress states affect the pullout capacity of simple unbranched model roots. Lengths of wood, rubber, and real roots were pulled from dry and partially saturated sand. The tests revealed the importance of the root to soil stiffness ratio during progressive failure, the mechanical properties of soil (and interfaces) at low effective stresses, the root diameter, and the tortuosity of the root material. Scaling issues due to shear banding are more important, and effective stresses under wet conditions are smaller than in conventional geotechnical practice because roots have a relatively small diameter ...

High-resolution synchrotron imaging shows that root hairs influence rhizosphere soil structure formation

Summary In this paper, we provide direct evidence of the importance of root hairs on pore structure development at the root–soil interface during the early stage of crop establishment. This was achieved by use of high‐resolution (c. 5 μm) synchrotron radiation computed tomography (SRCT) to visualise both the structure of root hairs and the soil pore structure in plant–soil microcosms. Two contrasting genotypes of barley (Hordeum vulgare), with and without root hairs, were grown for 8 d in microcosms packed with sandy loam soil at 1.2 g cm−3 dry bulk density. Root hairs were visualised within air‐filled pore spaces, but not in the fine‐textured soil regions. We found that the genotype with root hairs significantly altered the porosity and connectivity of the detectable pore space (> 5 μm) in the rhizosphere, as compared with the no‐hair mutants. Both genotypes showed decreasing pore space between 0.8 and 0.1 mm from the root surface. Interestingly the root‐hair‐bearing genotype had a significantly greater soil pore volume‐fraction at the root–soil interface. Effects of pore structure on diffusion and permeability were estimated to be functionally insignificant under saturated conditions when simulated using image‐based modelling.

Plant exudates may stabilize or weaken soil depending on species, origin and time

&NA; We hypothesized that plant exudates could either gel or disperse soil depending on their chemical characteristics. Barley (Hordeum vulgare L. cv. Optic) and maize (Zea mays L. cv. Freya) root exudates were collected using an aerated hydroponic method and compared with chia (Salvia hispanica L.) seed exudate, a commonly used root exudate analogue. Sandy loam soil was passed through a 500‐μm mesh and treated with each exudate at a concentration of 4.6 mg exudate g−1 dry soil. Two sets of soil samples were prepared. One set of treated soil samples was maintained at 4°C to suppress microbial processes. To characterize the effect of decomposition, the second set of samples was incubated at 16°C for 2 weeks at −30 kPa matric potential. Gas chromatography‐mass spectrometry (GC‐MS) analysis of the exudates showed that barley had the largest organic acid content and chia the largest content of sugars (polysaccharide‐derived or free), and maize was in between barley and chia. Yield stress of amended soil samples was measured by an oscillatory strain sweep test with a cone plate rheometer. When microbial decomposition was suppressed at 4°C, yield stress increased 20‐fold for chia seed exudate and twofold for maize root exudate compared with the control, whereas for barley root exudate decreased to half. The yield stress after 2 weeks of incubation compared with soil with suppressed microbial decomposition increased by 85% for barley root exudate, but for chia and maize it decreased by 87 and 54%, respectively. Barley root exudation might therefore disperse soil and this could facilitate nutrient release. The maize root and chia seed exudates gelled soil, which could create a more stable soil structure around roots or seeds. HighlightsRheological measurements quantified physical behaviour of plant exudates and effect on soil stabilization.Barley root exudates dispersed soil, which could release nutrients and carbon.Maize root and chia seed exudates had a stabilizing effect on soil.Physical engineering of soil in contact with plant roots depends on the nature and origin of exudates.

Correlating hydrologic reinforcement of vegetated soil with plant traits during establishment of woody perennials

Background and aimsVegetation stabilizes slopes via root mechanical reinforcement and hydrologic reinforcement induced by transpiration. Most studies have focused on mechanical reinforcement and its correlation with plant biomechanical traits. The correlations however generally ignore the effects of hydrologic reinforcement. This study aims to quantify the hydrologic reinforcement associated with ten woody species and identify correlations with relevant plant traits.MethodsTen species widespread in Europe, which belong to Aquifoliaceae, Betulaceae, Buxaceae, Celastraceae, Fabaceae, Oleaceae and Salicaceae families, were planted in pots of sandy loam soil. Each planted pot was irrigated and then left to transpire. Soil strength, matric suction and plant traits were measured.ResultsTranspiration-induced suction was linearly correlated with soil penetration resistance for the ten species due to their different transpiration rates i.e. both suction and soil penetration resistance induced by Hazel and Blackthorn (deciduous) were five times greater than those by Holly and European Box (evergreens). Specific leaf area and root length density correlated with hydrologic reinforcement. The root:shoot ratio correlated best with the hydrologic reinforcement.ConclusionsSpecific leaf area, root length density and root:shoot ratio explained the tenfold differences in hydrologic reinforcement provided by the ten different species.

Morphological and genetic characterisation of the root system architecture of selected barley recombinant chromosome substitution lines using an integrated phenotyping approach

Discoveries on the genetics of resource acquisition efficiency are limited by the ability to measure plant roots in sufficient number and with adequate genotypic variability. This paper presents a root phenotyping study that explores ways to combine live imaging and computer algorithms for model-based extraction of root growth parameters. The study is based on a subset of barley Recombinant Chromosome Substitution Lines (RCSLs) and a combinatorial approach was designed for fast identification of the regions of the genome that contribute the most to variations in root system architecture (RSA). Results showed there was a strong genotypic variation in root growth parameters within the set of genotypes studied. The chromosomal regions associated with primary root growth differed from the regions of the genome associated with changes in lateral root growth. The concepts presented here are discussed in the context of identifying root QTL and its potential to assist breeding for novel crops with improved root systems.