A.P. Paulikas

Enhancing Hydrogen Evolution Activity in Water Splitting by Tailoring Li+-Ni(OH)2-Pt Interfaces

Combining two different types of catalysts accelerated the hydrogen-generation step in water electrolysis. Improving the sluggish kinetics for the electrochemical reduction of water to molecular hydrogen in alkaline environments is one key to reducing the high overpotentials and associated energy losses in water-alkali and chlor-alkali electrolyzers. We found that a controlled arrangement of nanometer-scale Ni(OH)2 clusters on platinum electrode surfaces manifests a factor of 8 activity increase in catalyzing the hydrogen evolution reaction relative to state-of-the-art metal and metal-oxide catalysts. In a bifunctional effect, the edges of the Ni(OH)2 clusters promoted the dissociation of water and the production of hydrogen intermediates that then adsorbed on the nearby Pt surfaces and recombined into molecular hydrogen. The generation of these hydrogen intermediates could be further enhanced via Li+-induced destabilization of the HO–H bond, resulting in a factor of 10 total increase in activity.

Design and synthesis of bimetallic electrocatalyst with multilayered Pt-skin surfaces.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

Multimetallic Au/FePt3 Nanoparticles as Highly Durable Electrocatalyst

We report the design and synthesis of multimetallic Au/Pt-bimetallic nanoparticles as a highly durable electrocatalyst for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. This system was first studied on well-defined Pt and FePt thin films deposited on a Au(111) surface, which has guided the development of novel synthetic routes toward shape-controlled Au nanoparticles coated with a Pt-bimetallic alloy. It has been demonstrated that these multimetallic Au/FePt(3) nanoparticles possess both the high catalytic activity of Pt-bimetallic alloys and the superior durability of the tailored morphology and composition profile, with mass-activity enhancement of more than 1 order of magnitude over Pt catalysts. The reported synergy between well-defined surfaces and nanoparticle synthesis offers a persuasive approach toward advanced functional nanomaterials.

Time-dependent structural phenomena at room temperature in quenched YBa2Cu3O6.41 : local oxygen ordering and superconductivity

Abstract The superconducting transition temperature, T c , of YBa 2 Cu 3 O 6.41 quenched from 500°C into liquid nitrogen increases from 0 to 20 K while annealing at room temperature during the first few days following the quench. Using neutron powder diffraction and Rietveld refinement we show that this time-dependent increase of T c is accompanied by changes in the structural properties. The a -and c -axes contract by 0.04%, while the percentage shortening of the b -axis is three times smaller. We attribute this behavior to charge transfer between the chains and planes, with the smaller contraction along the b -axis arising from oxygen ordering in the chains. Clear evidence for this charge transfer is seen in the relevant Cu-O and Cu-Cu distances. No significant changes in the average occupancies of oxygen sites are observed. We attribute the increase in T c to local ordering of oxygen atoms around the Cu(1) atoms with no change in the average site occupancies.

Improving the hydrogen oxidation reaction rate by promotion of hydroxyl adsorption.

The development of hydrogen-based energy sources as viable alternatives to fossil-fuel technologies has revolutionized clean energy production using fuel cells. However, to date, the slow rate of the hydrogen oxidation reaction (HOR) in alkaline environments has hindered advances in alkaline fuel cell systems. Here, we address this by studying the trends in the activity of the HOR in alkaline environments. We demonstrate that it can be enhanced more than fivefold compared to state-of-the-art platinum catalysts. The maximum activity is found for materials (Ir and Pt₀.₁Ru₀.₉) with an optimal balance between the active sites that are required for the adsorption/dissociation of H₂ and for the adsorption of hydroxyl species (OHad). We propose that the more oxophilic sites on Ir (defects) and PtRu material (Ru atoms) electrodes facilitate the adsorption of OHad species. Those then react with the hydrogen intermediates (Had) that are adsorbed on more noble surface sites.

Enhancing the Alkaline Hydrogen Evolution Reaction Activity through the Bifunctionality of Ni(OH)2/Metal Catalysts

Active in alkaline environment: The activity of nickel, silver, and copper catalysts for the electrochemical transformation of water to molecular hydrogen in alkaline solutions was enhanced by modification of the metal surfaces by Ni(OH)(2) (see picture; I = current density and η = overpotential). The hydrogen evolution reaction rate on a Ni electrode modified by Ni(OH)(2) nanoclusters is about four times higher than on a bare Ni surface.

Superconducting Gap in Bi-Sr-Ca-Cu-O by High-Resolution Angle-Resolved Photoelectron Spectroscopy

Detailed studies indicate a superconducting gap in the high-temperature superconductor Bi2Sr2CaCu2O8. Photoemission measurements with high energy and angle resolution isolate the behavior of a single band as it crosses the Fermi level in both the normal and superconducting states, giving support to the Fermi liquid picture. The magnitude of the gap is 24 millielectron volts.

Superconductivity in YBa2−xSrxCu3O7−δ

We report structure, resistivity, and Meissner effect measurements on YBa2−xSrxCu3O7−δ for 0<x<2.0. We find a region of solid solubility extending at least to x=1.0 and a monotonic depression of Tc with x. Using arguments based on structural changes with Sr doping, we speculate that the depression of Tc is due to the local distortion of the lattice in the neighborhood of the Sr site and the introduction of additional oxygen vacancies.

Unique electrochemical adsorption properties of Pt-skin surfaces.

PtM alloys (M = Co, Ni, Fe, etc.) have been extensively studied for their use in fuel cells, both in well-defined extended surfaces, as well as in nanoparticles. After the report about exceptional activity of Pt3Ni(111)-skin surface [1a] for the oxygen reduction reaction (ORR) a lot of efforts have been made to mimic this catalytic behavior at the nanoscale. It has been shown that a Pt3Ni(111) crystal annealed in ultrahigh vacuum (UHV) shows an oscillating segregation profile, with the outermost layer consisting of pure platinum while the second layer is enriched in nickel compared to the bulk composition. Such a surface we termed Pt skin, and owing to the presence of the non-noble metal in the subsurface layer it has altered electronic properties compared to the monometallic Pt single crystal with the same orientation. Accordingly, altered electronic properties induce a change in adsorption behavior, specifically a shift of surface-oxide formation to higher potentials. This adsorption behavior is believed to be the origin of the high activity for the ORR. On the opposite side of the potential scale, the adsorption of hydrogenated species, denoted as underpotentially adsorbed hydrogen (Hupd), is also largely affected on Pt-skin surfaces. [4] Despite numerous efforts dedicated to synthesize nanocatalysts with Pt-skin-type surfaces, it still remains a challenge to claim their existence at the nanoscale. To systematically resolve this issue, we attempt to provide fundamental insight into the adsorption properties of well-defined Pt-skin surfaces under relevant electrochemical conditions and to transfer that knowledge to corresponding nanocatalysts. For that reason, we first examine the formation and composition of Pt-skin surfaces by low-energy ion scattering (LEIS) and scanning tunneling microscopy (STM) in UHV, and second we study the composition of the surfaces in an electrochemical environment to establish their adsorption properties. We demonstrate by cyclic voltammetry that the surface coverage of Hupd on Pt skin is about half of that found on Pt(111), whereas the surface coverage of a saturated monolayer of carbon monoxide is similar for both surfaces. This is an important finding, which provides a link towards accurate determination of the electrochemically active surface area of nanoscale catalysts. The developed methodology provides additional evidence for the existence of Pt-skin surfaces on Pt-bimetallic nanocatalysts and can substantially diminish errors in the evaluation of the real surface area and catalytic activity. A thorough examination of the Pt-skin surfaces was performed in view of their importance in electrocatalysis as well as in response to recent questions and doubts in the

Pressure-induced charge transfer and dTc/dP in YBa2Cu3O7−x

Abstract Subtle pressure-induced structural changes in YBa2Cu3O6.93 and YBa2Cu3O6.60 have been measured by neutron powder diffraction for samples in a hydrostatic helium-gas pressure cell. Small, but significant, differences in the compression of particular Cu-O bonds (notably Cu(2)-O(4)) are observed. However, when the charges on the two copper sites are calculated, requiring overall charge conservation versus pressure, it is found that the net pressure-induced charge transfer of holes from Cu(1) to Cu(2) is essentially the same for both systems. We conclude that the much smaller value of dTc/dP for YBa2Cu3O6.93 results from the fact that, in the 90 K superconductor, the Tc has already reached its optimum value and the introduction of additional hole carriers cannot further increase Tc.