Aaron M. Tondreau

Iron catalysts for selective anti-Markovnikov alkene hydrosilylation using tertiary silanes.

An Iron Hand for Silicon Carbon-silicon bonds are integral to the structure of the silicone materials widely used in adhesives, cosmetics, and numerous other industrial and consumer products. Generally, platinum-based catalysts have performed best in the hydrosilylation reactions that form these bonds, but the expense of the precious metal and, in some cases, by-product formation have motivated a search for alternatives. Tondreau et al. (p. 567) now show that a class of iron compounds readily catalyzes hydrosilylation of certain commercially important substrates with rates and selectivities comparable to, or even exceeding, those associated with platinum. Iron catalysts offer a potentially cheaper route than platinum for certain commercially useful carbon-silicon compounds. Alkene hydrosilylation, the addition of a silicon hydride (Si-H) across a carbon-carbon double bond, is one of the largest-scale industrial applications of homogeneous catalysis and is used in the commercial production of numerous consumer goods. For decades, precious metals, principally compounds of platinum and rhodium, have been used as catalysts for this reaction class. Despite their widespread application, limitations such as high and volatile catalyst costs and competing side reactions have persisted. Here, we report that well-characterized molecular iron coordination compounds promote the selective anti-Markovnikov addition of sterically hindered, tertiary silanes to alkenes under mild conditions. These Earth-abundant base-metal catalysts, coordinated by optimized bis(imino)pyridine ligands, show promise for industrial application.

Bis(imino)pyridine iron complexes for aldehyde and ketone hydrosilylation.

Bis(imino)pyridine iron dinitrogen and dialkyl complexes are well-defined precatalysts for the chemo- and regioselective reduction of aldehydes and ketones. Efficient carbonyl hydrosilylation is observed at low (0.1-1.0 mol %) catalyst loadings and with 2 equiv of either PhSiH(3) or Ph(2)SiH(2), representing one of the most active iron-catalyzed carbonyl reductions reported to date.

Synthesis and Electronic Structure of Cationic, Neutral, and Anionic Bis(imino)pyridine Iron Alkyl Complexes: Evaluation of Redox Activity in Single-Component Ethylene Polymerization Catalysts

A family of cationic, neutral, and anionic bis(imino)pyridine iron alkyl complexes has been prepared, and their electronic and molecular structures have been established by a combination of X-ray diffraction, Mössbauer spectroscopy, magnetochemistry, and open-shell density functional theory. For the cationic complexes, [((iPr)PDI)Fe-R][BPh(4)] ((iPr)PDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)N═CMe)(2)C(5)H(3)N; R = CH(2)SiMe(3), CH(2)CMe(3), or CH(3)), which are known single-component ethylene polymerization catalysts, the data establish high spin ferrous compounds (S(Fe) = 2) with neutral, redox-innocent bis(imino)pyridine chelates. One-electron reduction to the corresponding neutral alkyls, ((iPr)PDI)Fe(CH(2)SiMe(3)) or ((iPr)PDI)Fe(CH(2)CMe(3)), is chelate-based, resulting in a bis(imino)pyridine radical anion (S(PDI) = 1/2) antiferromagnetically coupled to a high spin ferrous ion (S(Fe) = 2). The neutral neopentyl derivative was reduced by an additional electron and furnished the corresponding anion, [Li(Et(2)O)(3)][((iPr)PDI)Fe(CH(2)CMe(3))N(2)], with concomitant coordination of dinitrogen. The experimental and computational data establish that this S = 0 compound is best described as a low spin ferrous compound (S(Fe) = 0) with a closed-shell singlet bis(imino)pyridine dianion (S(PDI) = 0), demonstrating that the reduction is ligand-based. The change in field strength of the bis(imino)pyridine coupled with the placement of the alkyl ligand into the apical position of the molecule induced a spin state change at the iron center from high to low spin. The relevance of the compounds and their electronic structures to olefin polymerization catalysis is also presented.

Iron-catalyzed intermolecular [2+2] cycloadditions of unactivated alkenes

Iron plays matchmaker to pair up olefins In theory, shining the right wavelength of light onto carbon-carbon double bonds should pair them up into four-membered cyclobutane rings. In practice, however, this route can prove finicky and inefficient, particularly if the necessary wavelength lies deep in the ultraviolet region. Hoyt et al. report an iron catalyst that coaxes a wide variety of simple olefins into such rings without the need for photoexcitation (see the Perspective by Smith and Baran). Systematic optimization of the ligand coordinated to iron effectively eliminated competing pathways to alternative products. Science, this issue p. 960; see also p. 925 A carefully optimized catalyst offers a general route to four-membered carbon rings. [Also see Perspective by Smith and Baran] Cycloadditions, such as the [4+2] Diels-Alder reaction to form six-membered rings, are among the most powerful and widely used methods in synthetic chemistry. The analogous [2+2] alkene cycloaddition to synthesize cyclobutanes is kinetically accessible by photochemical methods, but the substrate scope and functional group tolerance are limited. Here, we report iron-catalyzed intermolecular [2+2] cycloaddition of unactivated alkenes and cross cycloaddition of alkenes and dienes as regio- and stereoselective routes to cyclobutanes. Through rational ligand design, development of this base metal–catalyzed method expands the chemical space accessible from abundant hydrocarbon feedstocks.

Reduction Chemistry of Aryl- and Alkyl-Substituted Bis(imino)pyridine Iron Dihalide Compounds: Molecular and Electronic Structures of [(PDI)2Fe] Derivatives

Sodium amalgam reduction of the aryl-substituted bis(imino)pyridine iron dibromide complex, ((Et)PDI)FeBr2 ((Et)PDI = 2,6-(2,6-Et2-C6H3N=CMe)2C5H3N), under a dinitrogen atmosphere in pentane furnished the bis(chelate)iron compound, ((Et)PDI)2Fe. Characterization by X-ray crystallography established a distorted four-coordinate iron center with two kappa2-bis(imino)pyridine ligands. Reducing the steric demands of the imine substituent to either a less sterically encumbered aryl ring (e.g., C6H4-4-OMe) or an alkyl group (e.g., Cy, iPr, cis-myrtanyl) also yielded bis(chelate) compounds from sodium amalgam reduction of the corresponding dihalide. Characterization of the compounds with smaller imine substituents by X-ray diffraction established six-coordinate, pseudo-octahedral compounds. In one case, a neutral bis(chelate)iron compound was prepared by reduction of the corresponding iron dication, [(PDI)2Fe]2+, providing chemical confirmation of electrochemically generated species that were previously reported as too reducing to isolate. Magnetic measurements, metrical parameters from X-ray structures, Mössbauer spectroscopy, and open-shell, broken symmetry DFT calculations were used to establish the electronic structure of both types (four- and six-coordinate) of neutral bis(chelate) compounds. The experimentally observed S = 1 compounds are best described as having high-spin ferrous (S(Fe) = 2) centers antiferromagnetically coupled to two bis(imino)pyridine radical anions. Thus, the two-electron reduction of the diamagnetic, low-spin complex [(PDI)2Fe]2+ to [(PDI)2Fe] is ligand-based with a concomitant spin change at iron.

Oxidation and reduction of bis(imino)pyridine iron dinitrogen complexes: evidence for formation of a chelate trianion.

Oxidation and reduction of the bis(imino)pyridine iron dinitrogen compound, ((iPr)PDI)FeN(2) ((iPr)PDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)-N═CMe)(2)C(5)H(3)N) has been examined to determine whether the redox events are metal or ligand based. Treatment of ((iPr)PDI)FeN(2) with [Cp(2)Fe][BAr(F)(4)] (BAr(F)(4) = B(3,5-(CF(3))(2)-C(6)H(3))(4)) in diethyl ether solution resulted in N(2) loss and isolation of [((iPr)PDI)Fe(OEt(2))][BAr(F)(4)]. The electronic structure of the compound was studied by SQUID magnetometry, X-ray diffraction, EPR and zero-field (57)Fe Mössbauer spectroscopy. These data, supported by computational studies, established that the overall quartet ground state arises from a high spin iron(II) center (S(Fe) = 2) antiferromagnetically coupled to a bis(imino)pyridine radical anion (S(PDI) = 1/2). Thus, the oxidation event is principally ligand based. The one electron reduction product, [Na(15-crown-5)][((iPr)PDI)FeN(2)], was isolated following addition of sodium naphthalenide to ((iPr)PDI)FeN(2) in THF followed by treatment with the crown ether. Magnetic, spectroscopic, and computational studies established a doublet ground state with a principally iron-centered SOMO arising from an intermediate spin iron center and a rare example of trianionic bis(imino)pyridine chelate. Reduction of the iron dinitrogen complex where the imine methyl groups have been replaced by phenyl substituents, ((iPr)BPDI)Fe(N(2))(2) resulted in isolation of both the mono- and dianionic iron dinitrogen compounds, [((iPr)BPDI)FeN(2)](-) and [((iPr)BPDI)FeN(2)](2-), highlighting the ability of this class of chelate to serve as an effective electron reservoir to support neutral ligand complexes over four redox states.

Oxidation and Reduction of Bis(imino)pyridine Iron Dicarbonyl Complexes

The oxidation and reduction of a redox-active aryl-substituted bis(imino)pyridine iron dicarbonyl has been explored to determine whether electron-transfer events are ligand- or metal-based or a combination of both. A series of bis(imino)pyridine iron dicarbonyl compounds, [((iPr)PDI)Fe(CO)(2)](-), ((iPr)PDI)Fe(CO)(2), and [((iPr)PDI)Fe(CO)(2)](+) [(iPr)PDI = 2,6-(2,6-(i)Pr(2)C(6)H(3)N═CMe)(2)C(5)H(3)N], which differ by three oxidation states, were prepared and the electronic structures evaluated using a combination of spectroscopic techniques and, in two cases, [((iPr)PDI)Fe(CO)(2)](+) and [((iPr)PDI)Fe(CO)(2)], metrical parameters from X-ray diffraction. The data establish that the cationic iron dicarbonyl complex is best described as a low-spin iron(I) compound (S(Fe) = ½) with a neutral bis(imino)pyridine chelate. The anionic iron dicarbonyl, [((iPr)PDI)Fe(CO)(2)](-), is also best described as an iron(I) compound but with a two-electron-reduced bis(imino)pyridine. The covalency of the neutral compound, ((iPr)PDI)Fe(CO)(2), suggests that both the oxidative and reductive events are not ligand- or metal-localized but a result of the cooperativity of both entities.

Extending Stannyl Anion Chemistry to the Actinides: Synthesis and Characterization of a Uranium-Tin Bond.

We have synthesized a rare example of a uranium(IV) stannyl (κ(4)-N(CH2CH2NSi((i)Pr)3)3U(SnMe3), 1) via transmetalation with LiSnMe3. This complex has been characterized crystallographically and shown to have a U-Sn bond length of 3.3130(3) Å, substantially longer than the only other crystallographically observed U-Sn bond (3.166 Å). Computational studies suggest that the U-Sn bond in 1 is highly polarized, with significant charge transfer to the stannylate ligand. We briefly discuss plausible mechanistic scenarios for the formation of 1, which may be relevant to other transmetalation processes involving heavy main group atoms. Furthermore, we demonstrate the reducing ability of [SnMe3](-) in the absence of strongly donating ligands on U(IV).

Synthesis and Electronic Structure Diversity of Pyridine(diimine)iron Tetrazene Complexes

A series of pyridine(diimine)iron tetrazene compounds, (iPrPDI)Fe[(NR)NN(NR)] [iPrPDI = 2,6-(ArN = CMe)2C5H3N; Ar = 2,6-iPr2C6H3] has been prepared either by the addition of 2 equiv of an organic azide, RN3, to the corresponding iron bis(dinitrogen) compound, (iPrPDI)Fe(N2)2 or by the addition of azide to the iron imide derivatives, (iPrPDI)FeNR. The electronic structures of these compounds were determined using a combination of metrical parameters from X-ray diffraction, solution and solid-state magnetic measurements, zero-field 57Fe Mössbauer and 1H NMR spectroscopies, and density functional theory calculations. The overall electronic structure of the iron tetrazene compounds is sensitive to the nature of the tetrazene nitrogen substituent with three distinct classes of compounds identified: (i) overall diamagnetic ( S = 0) compounds arising from intermediate-spin iron(II) centers ( SFe = 1) engaged in antiferromagnetic coupling with both pyridine(diimine) and tetrazene radical anions ( SPDI = -1/2 and Stetrazene = -1/2; R = 2-adamantyl, cyclooctyl, benzyl); (ii) overall S = 1 compounds best described as intermediate-spin iron(III) ( SFe = 3/2) derivatives engaged in antiferromagnetic coupling with a pyridine(diimine) radical anion ( SPDI = -1/2; R = 3,5-Me2C6H3, 4-MeC6H4); (iii) overall S = 2 compounds best described as high-spin iron(III) centers ( SFe = 5/2) engaged in antiferromagnetic coupling to a pyridine(diimine) radical anion ( SPDI = -1/2; R = 1-adamantyl). For both the intermediate- and high-spin ferric cases, the tetrazene ligand adopts the closed-shell, dianionic form, [N4R2]2-. For the case where R = SiMe3, spin-crossover behavior is observed, arising from a spin-state change from intermediate- to high-spin iron(III).