Aashish A. Clerk

Quantum theory of cavity-assisted sideband cooling of mechanical motion.

We present a quantum-mechanical theory of the cooling of a cantilever coupled via radiation pressure to an illuminated optical cavity. Applying the quantum noise approach to the fluctuations of the radiation pressure force, we derive the optomechanical cooling rate and the minimum achievable phonon number. We find that reaching the quantum limit of arbitrarily small phonon numbers requires going into the good-cavity (resolved phonon sideband) regime where the cavity linewidth is much smaller than the mechanical frequency and the corresponding cavity detuning. This is in contrast to the common assumption that the mechanical frequency and the cavity detuning should be comparable to the cavity damping.

Introduction to Quantum Noise, Measurement and Amplication

The topic of quantum noise has become extremely timely due to the rise of quantum information physics and the resulting interchange of ideas between the condensed matter and atomic, molecular, optical--quantum optics communities. This review gives a pedagogical introduction to the physics of quantum noise and its connections to quantum measurement and quantum amplification. After introducing quantum noise spectra and methods for their detection, the basics of weak continuous measurements are described. Particular attention is given to the treatment of the standard quantum limit on linear amplifiers and position detectors within a general linear-response framework. This approach is shown how it relates to the standard Haus-Caves quantum limit for a bosonic amplifier known in quantum optics and its application to the case of electrical circuits is illustrated, including mesoscopic detectors and resonant cavity detectors.

Cooling a nanomechanical resonator with quantum back-action

Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radio-frequency nanomechanical resonator. The conductance of the SSET, which is capacitively coupled to the resonator, provides a sensitive probe of the latters position; back-action effects manifest themselves as an effective thermal bath, the properties of which depend sensitively on SSET bias conditions. Surprisingly, when the SSET is biased near a transport resonance, we observe cooling of the nanomechanical mode from 550 mK to 300 mK—an effect that is analogous to laser cooling in atomic physics. Our measurements have implications for nanomechanical readout of quantum information devices and the limits of ultrasensitive force microscopy (such as single-nuclear-spin magnetic resonance force microscopy). Furthermore, we anticipate the use of these back-action effects to prepare ultracold and quantum states of mechanical structures, which would not be accessible with existing technology.

Preparation and Detection of a Mechanical Resonator Near the Ground State of Motion

Cold, macroscopic mechanical systems are expected to behave contrary to our usual classical understanding of reality; the most striking and counterintuitive predictions involve the existence of states in which the mechanical system is located in two places simultaneously. Various schemes have been proposed to generate and detect such states, and all require starting from mechanical states that are close to the lowest energy eigenstate, the mechanical ground state. Here we report the cooling of the motion of a radio-frequency nanomechanical resonator by parametric coupling to a driven, microwave-frequency superconducting resonator. Starting from a thermal occupation of 480 quanta, we have observed occupation factors as low as 3.8 ± 1.3 and expect the mechanical resonator to be found with probability 0.21 in the quantum ground state of motion. Further cooling is limited by random excitation of the microwave resonator and heating of the dissipative mechanical bath. This level of cooling is expected to make possible a series of fundamental quantum mechanical observations including direct measurement of the Heisenberg uncertainty principle and quantum entanglement with qubits.

Using interference for high fidelity quantum state transfer in optomechanics.

We revisit the problem of using a mechanical resonator to perform the transfer of a quantum state between two electromagnetic cavities (e.g., optical and microwave). We show that this system possesses an effective mechanically dark mode which is immune to mechanical dissipation; utilizing this feature allows highly efficient transfer of intracavity states, as well as of itinerant photon states. We provide simple analytic expressions for the fidelity for transferring both gaussian and non-gaussian states.

Back-action evasion and squeezing of a mechanical resonator using a cavity detector

We study the quantum measurement of a cantilever using a parametrically coupled electromagnetic cavity which is driven at the two sidebands corresponding to the mechanical motion. This scheme, originally due to Braginsky et al (Braginsky V, Vorontsov Y I and Thorne K P 1980 Science 209 547), allows a back-action free measurement of one quadrature of the cantilevers motion, and hence the possibility of generating a squeezed state. We present a complete quantum theory of this system, and derive simple conditions on when the quantum limit on the added noise can be surpassed. We also study the conditional dynamics of the measurement, and discuss how such a scheme (when coupled with feedback) can be used to generate and detect squeezed states of the oscillator. Our results are relevant to experiments in optomechanics, and to experiments in quantum electromechanics employing stripline resonators coupled to mechanical resonators.

Quantum squeezing of motion in a mechanical resonator

Manipulation of a quantum squeeze The uncertainty principle of quantum mechanics dictates that even when a system is cooled to its ground state, there are still fluctuations. This zero-point motion is unavoidable but can be manipulated. Wollman et al. demonstrate such manipulation with the motion of a micrometer-sized mechanical system. By driving up the fluctuations in one of the variables of the system, they are able to squeeze the other related variable below the expected zero-point limit. Quantum squeezing will be important for realizing ultrasensitive sensors and detectors. Science, this issue p. 952 The fluctuating motion of a mechanical system can be squeezed below the zero-point limit. According to quantum mechanics, a harmonic oscillator can never be completely at rest. Even in the ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. Using microwave frequency radiation pressure, we have manipulated the thermal fluctuations of a micrometer-scale mechanical resonator to produce a stationary quadrature-squeezed state with a minimum variance of 0.80 times that of the ground state. We also performed phase-sensitive, back-action evading measurements of a thermal state squeezed to 1.09 times the zero-point level. Our results are relevant to the quantum engineering of states of matter at large length scales, the study of decoherence of large quantum systems, and for the realization of ultrasensitive sensing of force and motion.

Reservoir-engineered entanglement in optomechanical systems.

We show how strong steady-state entanglement can be achieved in a three-mode optomechanical system (or other parametrically coupled bosonic system) by effectively laser cooling a delocalized Bogoliubov mode. This approach allows one to surpass the bound on the maximum stationary intracavity entanglement possible with a coherent two-mode squeezing interaction. In particular, we find that optimizing the relative ratio of optomechanical couplings, rather than simply increasing their magnitudes, is essential for achieving strong entanglement. Unlike typical dissipative entanglement schemes, our results cannot be described by treating the effects of the entangling reservoir via a Linblad master equation.

Fano resonances as a probe of phase coherence in quantum dots.

In the presence of direct trajectories connecting source and drain contacts, the conductance of a quantum dot may exhibit resonances of the Fano type. Since Fano resonances result from the interference of two transmission pathways, their line shape (as described by the Fano parameter q) is sensitive to dephasing in the quantum dot. We show that under certain circumstances the dephasing time can be extracted from a measurement of q for a single resonance. We also show that q fluctuates from level to level, and we calculate its probability distribution for a chaotic quantum dot. Our results are relevant to recent experiments by Göres et al. [Phys. Rev. B 62, 2188 (2000)].

Back -action-evading measurements of nanomechanical motion

When carrying out ultrasensitive continuous measurements of position, one must ultimately confront the fundamental effects of detection back-action. Back-action forces set a lower bound on the uncertainty in the measured position, the ‘standard quantum limit’ (SQL). Recent measurements of nano- and micromechanical resonators are rapidly approaching this limit. Making measurements with sensitivities surpassing the SQL will require a new kind of approach: back-action-evading (BAE), quantum non-demolition measurement techniques. Here we realize a BAE measurement based on the parametric coupling between a nanomechanical and a microwave resonator. We demonstrate for the first time BAE detection of a single quadrature of motion with sensitivity four times the quantum zero-point motion of the mechanical resonator. We identify a limiting parametric instability inherent in BAE measurement, and describe how to improve the technique to surpass the SQL and permit the formation of squeezed states of motion.