Abay Gadisa

On the origin of the open-circuit voltage of polymer–fullerene solar cells

The increasing amount of research on solution-processable, organic donor-acceptor bulk heterojunction photovoltaic systems, based on blends of conjugated polymers and fullerenes has resulted in devices with an overall power-conversion efficiency of 6%. For the best devices, absorbed photon-to-electron quantum efficiencies approaching 100% have been shown. Besides the produced current, the overall efficiency depends critically on the generated photovoltage. Therefore, understanding and optimization of the open-circuit voltage (Voc) of organic solar cells is of high importance. Here, we demonstrate that charge-transfer absorption and emission are shown to be related to each other and Voc in accordance with the assumptions of the detailed balance and quasi-equilibrium theory. We underline the importance of the weak ground-state interaction between the polymer and the fullerene and we confirm that Voc is determined by the formation of these states. Our work further suggests alternative pathways to improve Voc of donor-acceptor devices.

Varying polymer crystallinity in nanofiber poly(3-alkylthiophene): PCBM solar cells: Influence on charge-transfer state energy and open-circuit voltage

The effect of poly(3-alkylthiophene) (P3AT) crystallinity in (nanofiber P3AT):PCBM photovoltaic devices on the energy of the charge-transfer state (ECT) and on the open-circuit voltage (Voc) is investigated for poly(3-butythiophene), poly(3-pentylthiophene) and poly(3-hexylhiophene). P3AT crystallinity, expressed as the crystalline nanofiber mass fraction f to the total P3AT mass in the spin-coating dispersion, is varied between ∼0.1 and ∼0.9 by temperature control. ECT, as obtained by Fourier-transform photocurrent spectroscopy decreased with f as ECT=ECT0−0.2f eV. Alkyl side-chain length only influences ECT0. Voc relates to ECT as Voc=ECT/q−0.6 V.

Large area nanofabrication of butterfly wing's three dimensional ultrastructures

The authors report a simple method for the artificial fabrication of the complex three-dimensional (3D) ultrastructures of butterfly wing scales. This method uses chemical vapor deposition, UV lithography, and chemical etching to create the ultrastructures over a large area surpassing previously used focused ion beam techniques that are limited to microscopic areas. Furthermore, this method shows flexibility to modify nanostructure types and can precisely control shapes and dimensions and periodicity. Fabricated 3D ultrastructures are also replicated using a nanoimprint method into soft polymer materials. Reflectivity measurements and simulations of the master and polymer replicas show selective UV reflection consistent with the length scales used in such butterfly-like nanostructures.

Minimizing interfacial losses in inverted organic solar cells comprising Al-doped ZnO

We demonstrated a 35% enhancement in the efficiency of inverted solar cells as a result of increased open-circuit voltage and fill factor by adsorbing an ultrathin layer of a ruthenium dye N719 on an aluminum-doped zinc oxide (ZnO-Al) electron collecting interfacial layer. The interface modification with N719 changes the charge injection levels as indicated by ultraviolet photoemission spectroscopy. The efficiency of inverted solar cells comprising a bulk heterojunction photo-active film of poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester has increased from ∼2.80% to 3.80% upon employing the dye modification of the electrode interface.

Panchromatic Sequentially Cast Ternary Polymer Solar Cells

A sequential-casting ternary method is developed to create stratified bulk heterojunction (BHJ) solar cells, in which the two BHJ layers are spin cast sequentially without the need of adopting a middle electrode and orthogonal solvents. This method is found to be particularly useful for polymers that form a mechanically alloyed morphology due to the high degree of miscibility in the blend.

Ground-state charge-transfer complex formation in hybrid poly(3-hexyl thiophene):titanium dioxide solar cells

The existence of a ground-state charge-transfer (CT) complex in a conjugated polymer:metal oxide nanoparticle bulk heterojunction photovoltaic cell is demonstrated by Fourier-transform photocurrent spectroscopy (FTPS). The CT complex between poly(3-hexylthiophene) (P3HT) and titanium dioxide (TiO2) is characterized by a weak additional photocurrent band (onset 1eV) in the FTPS spectra, situated below the conjugated polymer bandgap of 2eV. The presence of CT interaction between P3HT and TiO2 in relation to frontier orbital alignment is discussed, as well as the contribution of a sub-bandgap interfacial CT state to the electron transfer process in P3HT:TiO2 solar cells.

Effects of nano-patterned versus simple flat active layers in upright organic photovoltaic devices

A scalable procedure for nano-patterning the bulk heterojunction layer in organic photovoltaic (OPV) devices is reported. Nano-patterning is shown to increase light absorption in poly(3-hexylthiophene) : [6,6]-phenyl-C61-butyric acid methyl ester (P3HT : PCBM) devices (ITO\WO3\P3HT : PCBM\Ca\Al). Nano-patterning also modifies electric fields in OPV devices, thus affecting charge harvesting. Nano-patterned OPV devices with a power conversion efficiency of 4% are presented. Comparable efficiencies are also obtained by optimization of thicknesses in a flat-layer device. Trade-offs between absorption enhancement and charge harvesting deterioration induced by nano-patterning are discussed as well as possible optimization strategies.

Role of thin n-type metal-oxide interlayers in inverted organic solar cells.

We have investigated the photovoltaic properties of inverted solar cells comprising a bulk heterojunction film of poly(3-hexylthiophene) and phenyl-C(61)-butyric acid methyl ester, sandwiched between an indium-tin-oxide/Al-doped zinc oxide (ZnO-Al) front, and tungsten oxide/aluminum back electrodes. The inverted solar cells convert photons to electrons at an external quantum efficiency (EQE) exceeding 70%. This is a 10-15% increase over EQEs of conventional solar cells. The increase in EQE is not fully explained by the difference in the optical transparency of electrodes, interference effects due to an optical spacer effect of the metal-oxide electrode buffer layers, or variation in charge generation profile. We propose that a large additional splitting of excited states at the ZnO-Al/polymer interface leads to the considerably large photocurrent yield in inverted cells. Our finding provides new insights into the benefits of n-type metal-oxide interlayers in bulk heterojunction solar cells, namely the splitting of excited states and conduction of free electrons simultaneously.

Solution Processed Al-Doped ZnO Nanoparticles/TiOx Composite for Highly Efficient Inverted Organic Solar Cells

We investigated the electrical properties of solution processed Al-doped ZnO (AZO) nanoparticles, stabilized by mixing with a TiOx complex. Thin solid films cast from the solution of AZO-TiOx (AZOTi) (Ti/Zn ∼0.4 in the bulk and ∼0.8 on its surface) is processable in inert environment, without a need for either ambient air exposure for hydrolysis or high temperature thermal annealing commonly applied to buffer layers of most metal-oxides. It was found that the electronic structure of AZOTi matches the electronic structure of several electron acceptor and donor materials used in organic electronic devices, such as solar cells. Inverted solar cells employing a bulk heterojunction film of poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester, cast on an indium-tin-oxide/AZOTi electrode, and capped with a tungsten oxide/aluminum back electrode, give rise to a nearly 70% fill factor and an optimized open-circuit voltage as a result of efficient hole blocking behavior of AZOTi. The resulting electron collecting/blocking capability of this material solves crucial interfacial recombination issues commonly observed at the organic/metal-oxide interface in most inverted organic bulk heterojunction solar cells.

Bipolar Charge Transport in Fullerene Molecules in a Bilayer and Blend of Polyfluorene Copolymer and Fullerene

Efficient polymer solar cells typically contain the fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which promotes dissociation of excited states and enhances charge transpo ...