Yingchi Liu
University of North Carolina at Chapel Hill
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Yingchi Liu.
Nature | 1999
S. Zhu; Yingchi Liu; Miriam Rafailovich; Jonathan C. Sokolov; Dilip Gersappe; D. A. Winesett; Harald Ade
The use of polymer thin films in technology is increasingly widespread—for example, as protective or lithographic surface coatings, or as active (electronic or optical) elements in device architectures. But it is difficult to generate films of polymer mixtures with homogeneous surface properties, because of the tendency of the polymers to phase-separate,. Copolymer compatibilizers can induce miscibility in polymer blends, but only with chemical components that are either close to a critical point in the phase diagram or which have an attractive interaction between them,. Instead of manipulating the chemical composition of the blend, we show here that complete mixing can be obtained in polymer blends by the physical effect of confinement in thin films. The compatibilization results from entropic inhibition of phase separation into micelles, owing to confinement. The result is an intimately mixed microemulsion with a perfectly flat surface and a two-dimensional maze-like structure with columnar domains that extend through the film.
Applied Physics Letters | 2011
Yingchi Liu; Hubert K. Turley; John R. Tumbleston; Edward T. Samulski; Rene Lopez
The minority carrier transport length is a critical parameter limiting the performance of inexpensive Cu2O–ZnO photovoltaic devices. In this letter, this length is estimated to be ∼430 nm for electrochemically deposited Cu2O by linking the cell’s carrier generation profile with back and front incident photon-to-electron conversion efficiency measurements to a one-dimensional transport model. This critical length explains the losses typically presented by these devices and appears to correlate well with the microcrystalline film structure. The consequences of the magnitude of the length on device design with the aim of improving solar cell performance are described.
Physical Review B | 2011
B. Wu; Alexandre Zimmers; Herve Aubin; Rudresh Ghosh; Yingchi Liu; Rene Lopez
We report on local probe measurements of current-voltage and electrostatic force-voltage characteristics of electric-field-induced insulator to metal transition in VO2 thin film. In conducting AFM mode, switching from the insulating to metallic state occurs for electric-field threshold E~6.5\times10^7 Vm-1 at 300K. Upon lifting the tip above the sample surface, we find that the transition can also be observed through a change in electrostatic force and in tunneling current. In this noncontact regime, the transition is characterized by random telegraphic noise. These results show that electric field alone is sufficient to induce the transition; however, the electronic current provides a positive feedback effect that amplifies the phenomena.
Applied Physics Letters | 2012
Abay Gadisa; Yingchi Liu; Edward T. Samulski; Rene Lopez
We demonstrated a 35% enhancement in the efficiency of inverted solar cells as a result of increased open-circuit voltage and fill factor by adsorbing an ultrathin layer of a ruthenium dye N719 on an aluminum-doped zinc oxide (ZnO-Al) electron collecting interfacial layer. The interface modification with N719 changes the charge injection levels as indicated by ultraviolet photoemission spectroscopy. The efficiency of inverted solar cells comprising a bulk heterojunction photo-active film of poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester has increased from ∼2.80% to 3.80% upon employing the dye modification of the electrode interface.
Journal of Physics D | 2013
Yingchi Liu; Christoph Kirsch; Abay Gadisa; Mukti Aryal; Sorin Mitran; Edward T. Samulski; Rene Lopez
A scalable procedure for nano-patterning the bulk heterojunction layer in organic photovoltaic (OPV) devices is reported. Nano-patterning is shown to increase light absorption in poly(3-hexylthiophene) : [6,6]-phenyl-C61-butyric acid methyl ester (P3HT : PCBM) devices (ITO\WO3\P3HT : PCBM\Ca\Al). Nano-patterning also modifies electric fields in OPV devices, thus affecting charge harvesting. Nano-patterned OPV devices with a power conversion efficiency of 4% are presented. Comparable efficiencies are also obtained by optimization of thicknesses in a flat-layer device. Trade-offs between absorption enhancement and charge harvesting deterioration induced by nano-patterning are discussed as well as possible optimization strategies.
ACS Applied Materials & Interfaces | 2012
Abay Gadisa; Yingchi Liu; Edward T. Samulski; Rene Lopez
We have investigated the photovoltaic properties of inverted solar cells comprising a bulk heterojunction film of poly(3-hexylthiophene) and phenyl-C(61)-butyric acid methyl ester, sandwiched between an indium-tin-oxide/Al-doped zinc oxide (ZnO-Al) front, and tungsten oxide/aluminum back electrodes. The inverted solar cells convert photons to electrons at an external quantum efficiency (EQE) exceeding 70%. This is a 10-15% increase over EQEs of conventional solar cells. The increase in EQE is not fully explained by the difference in the optical transparency of electrodes, interference effects due to an optical spacer effect of the metal-oxide electrode buffer layers, or variation in charge generation profile. We propose that a large additional splitting of excited states at the ZnO-Al/polymer interface leads to the considerably large photocurrent yield in inverted cells. Our finding provides new insights into the benefits of n-type metal-oxide interlayers in bulk heterojunction solar cells, namely the splitting of excited states and conduction of free electrons simultaneously.
ACS Applied Materials & Interfaces | 2013
John R. Tumbleston; Abay Gadisa; Yingchi Liu; Brian A. Collins; Edward T. Samulski; Rene Lopez; Harald Ade
Nanoimprinting the photoactive layer of bulk heterojunction (BHJ) organic solar cells is a promising technique for enhancing device performance via improved light absorption. Here, we demonstrate that imprinting poly(3-hexylthiophene) (P3HT) and fullerene BHJ blends leads to adverse morphological changes within the photoactive nanopattern which have been previously overlooked. In particular, nanoimprinting induces a factor of 2 difference in polymer:fullerene composition between the nanopattern posts and interconnecting flash layer that inadvertently moves the composition outside the range for optimal performance. This occurs because of the strong tendency of regioregular P3HT to crystallize since imprinting blends based on amorphous regiorandom P3HT have uniform nanopattern composition. Based on these results, we outline promising design strategies, such as nanoimprinting amorphous polymers, to serve as guidelines for fabricating high-performance nanopatterned BHJ solar cells capable of maximized light absorption.
Thin Film Solar Technology III | 2011
Yingchi Liu; Hubert K. Turley; John R. Tumbleston; Rene Lopez
The minority carrier transport length (L) is a critical parameter limiting the performance of inexpensive Cu2O-ZnO photovoltaic devices. In this work, this length is determined for electrochemically deposited Cu2O by linking the optical carrier generation profile from front and back incident-photon-to-electron conversion efficiency (IPCE) measurements to a one dimensional carrier transport model. A transport length of ~ 400 nm is estimated. This critical length explains the losses typically presented by these devices. The consequences of this L on device design with the aim of improving solar cell performance are described.
Journal of Materials Chemistry | 2011
Doo Hyun Ko; John R. Tumbleston; Abay Gadisa; Mukti Aryal; Yingchi Liu; Rene Lopez; Edward T. Samulski
Advanced Energy Materials | 2012
John R. Tumbleston; Yingchi Liu; Edward T. Samulski; Rene Lopez