Abdelkader Bendahou

Multi-scale cellulose based new bio-aerogel composites with thermal super-insulating and tunable mechanical properties

Bio-composite aerogels based on bleached cellulose fibers (BCF) and cellulose nanoparticles having various morphological and physico-chemical characteristics are prepared by a freeze-drying technique and characterized. The various composite aerogels obtained were compared to a BCF aerogel used as the reference. Severe changes in the material morphology were observed by SEM and AFM due to a variation of the cellulose nanoparticle properties such as the aspect ratio, the crystalline index and the surface charge density. BCF fibers form a 3D network and they are surrounded by the cellulose nanoparticle thin films inducing a significant reduction of the size of the pores in comparison with a neat BCF based aerogel. BET analyses confirm the appearance of a new organization structure with pores of nanometric sizes. As a consequence, a decrease of the thermal conductivities is observed from 28mWm(-1)K(-1) (BCF aerogel) to 23mWm(-1)K(-1) (bio-composite aerogel), which is below the air conductivity (25mWm(-1)K(-1)). This improvement of the insulation properties for composite materials is more pronounced for aerogels based on cellulose nanoparticles having a low crystalline index and high surface charge (NFC-2h). The significant improvement of their insulation properties allows the bio-composite aerogels to enter the super-insulating materials family. The characteristics of cellulose nanoparticles also influence the mechanical properties of the bio-composite aerogels. A significant improvement of the mechanical properties under compression is obtained by self-organization, yielding a multi-scale architecture of the cellulose nanoparticles in the bio-composite aerogels. In this case, the mechanical property is more dependent on the morphology of the composite aerogel rather than the intrinsic characteristics of the cellulose nanoparticles.

Esterification and amidation for grafting long aliphatic chains on to cellulose nanocrystals: a comparative study

Heterogeneous modification of cellulose nanocrystals (CNC) has been achieved by using esterification and amidification to attach long aliphatic chains. Long-chain aliphatic acid chlorides and amines were used as grafting reagents. Surface grafting with acyl chains was confirmed by Fourier-transform infrared spectroscopy, elemental analysis, and X-ray photoelectron spectroscopy. It was found that the degree of substitution (DS) of the surface is highly dependent on the method of modification. Irrespective of grafting approach, the modified CNC was found to be hydrophobic after modification, as attested by contact angle measurement. The main emphasis was on the correlation between DS and the extent of surface grafting.

Characterization of cellulose nanowhiskers extracted from alfa fiber and the effect of their dispersion methods on nanocomposite properties

Abstract In this study, cellulose nanowhiskers (CNW) were prepared from alfa fiber (Stipa tenacissima) by an alkali treatment at room temperature in association with a bleaching treatment followed by a sulfuric acid hydrolysis. Fourier Transform Infrared (FT-IR) spectroscopy was used to highlight the evolution of chemical composition. Atomic Force Microscopy and Zeta-sizer indicated that the transverse size of the particles varied between 30 nm and 170 nm. Thermal stability was higher for CNW as compared to alfa fiber. FT-IR, X-ray diffraction, and Thermogravimetric analysis studies confirmed the removal of hemicelluloses and lignin during the chemical treatment process. The swelling of CNW in water with Cloisite 30B (CNW/C30B) or with the Polyethylene glycol (CNW/PEG) was carried out. The properties of Polyvinyl Chloride (PVC) nanocomposites reinforced with CNW which was dispersed with two different methods were also compared. The results showed that the morphology of both samples have drastic differences which may explain the fact that the storage modulus prepared with CNW/C30B was higher than those prepared with CNW/PEG. However, PVC/CNW/PEG nanocomposites exhibited more thermal stability. In the end, the obtained CNW may have potential applications in alternative power sources as a reinforcement phase.