Abhilash Sugunan

Synthesis of tetrahedral quasi-type-II CdSe-CdS core-shell quantum dots

Synthesis of colloidal nanocrystals of II-VI semiconductor materials has been refined in recent decades and their size dependent optoelectronic properties have been well established. Here we report a facile synthesis of CdSe-CdS core-shell heterostructures using a two-step hot injection process. Red-shifts in absorption and photoluminescence spectra show that the obtained quantum dots have quasi-type-II alignment of energy levels. The obtained nanocrystals have a heterostructure with a large and highly faceted tetrahedral CdS shell grown epitaxially over a spherical CdSe core. The obtained morphology as well as high resolution electron microscopy confirms that the tetrahedral shell have a zinc blende crystal structure. A phenomenological mechanism for the growth and morphology of the nanocrystals is discussed.

Electric field induced optical anisotropy of P3HT nanofibers in a liquid solution

The nanofiber morphology of regioregular Poly-3- hexylthiophene (P3HT) is a 1D crystalline structure organized by π - π stacking of the backbone chains. In this study, we report the impact of elect ...

Direct determination of spatial localization of carriers in CdSe-CdS quantum dots

Colloidal quantum dots (QDs) have gained significant attention due to their tunable band gap, simple solution processability, ease of scale-up, and low cost. By carefully choosing the materials, core-shell heterostructure QDs (HQDs) can be further synthesized with a controlled spatial spread of wave functions of the excited electrons and holes for various applications. Many investigations have been done to understand the exciton dynamics by optical characterizations. However, these spectroscopic data demonstrate that the spatial separation of the excitons cannot distinguish the distribution of excited electrons and holes. In this work, we report a simple and direct method to determine the localized holes and delocalized electrons in HQDs. The quasi-type-II CdSe-CdS coreshell QDs were synthesized via a thermolysis method. Poly(3-hexylthiophene) (P3HT) nanofiber and ZnO nanorods were selected as hole and electron conductor materials, respectively, and were combined with HQDs to form two different nanocomposites. Photoelectrical properties were evaluated under different environments via a quick and facile characterization method, confirming that the electrons in the HQDs were freely accessible at the surface of the nanocrystal, while the holes were confined within the CdSe core.

Polymer/Iron Oxide Nanoparticle Composites—A Straight Forward and Scalable Synthesis Approach

Magnetic nanoparticle systems can be divided into single-core nanoparticles (with only one magnetic core per particle) and magnetic multi-core nanoparticles (with several magnetic cores per particle). Here, we report multi-core nanoparticle synthesis based on a controlled precipitation process within a well-defined oil in water emulsion to trap the superparamagnetic iron oxide nanoparticles (SPION) in a range of polymer matrices of choice, such as poly(styrene), poly(lactid acid), poly(methyl methacrylate), and poly(caprolactone). Multi-core particles were obtained within the Z-average size range of 130 to 340 nm. With the aim to combine the fast room temperature magnetic relaxation of small individual cores with high magnetization of the ensemble of SPIONs, we used small (<10 nm) core nanoparticles. The performed synthesis is highly flexible with respect to the choice of polymer and SPION loading and gives rise to multi-core particles with interesting magnetic properties and magnetic resonance imaging (MRI) contrast efficacy.

Relaxation is the key to longer life: suppressed degradation of P3HT films on conductive substrates

Here we show the dependence of the degree of degradation of poly-3-hexylthiophene (P3HT) films on the conductivity of the supporting substrate. P3HT is widely used for organic solar cells and electronic devices because it allows simple, low cost fabrication and has potential for the fabrication of flexible devices. However, P3HT is known to have a relatively low photostability, and investigating the photodegradation mechanism is an active research field. We find that P3HT films on conductive substrates show significantly retarded degradation and retain their chemical and morphological features when compared to similar films on glass substrates. This ‘substrate effect’ in retarding the degradation of P3HT films is evident even upon prolonged exposure to air for up to five months.

Photoluminescence from quasi-type-II spherical CdSe-CdS core-shell quantum dots.

Spherical CdSe-CdS core-shell quantum dots (QDs) are found to be flexible in the transition between the type-I regime and the type-II regime with different core/shell dimensions. The quasi-type-II feature of the colloidal dots is confirmed with time-resolved photoluminescence (PL) measurements. Two recombination paths of the excitons with significantly different decay rates are observed and analyzed. The spherical CdSe-CdS core-shell QDs are numerically simulated to investigate the carrier separation. A relatively long radiative lifetime and high degree of spatial carrier separation provide good potential to achieve lasing under continuous-wave excitation. Amplified spontaneous emission at room temperature is detected from the QDs embedded in the polymer matrix. It is shown that a larger shell thickness results in a lower pumping threshold, while a smaller shell thickness leads to higher PL efficiency.

Synthesis of high aspect ratio gold nanorods and their effects on human antigen presenting dendritic cells

High aspect ratio (AR) gold nanorods (NRs) attract great interest for biomedical applications due to their novel physicochemical properties. Here, we report a facile method for preparation of high ...

Polymeric/Inorganic Multifunctional Nanoparticles for Simultaneous Drug Delivery and Visualization

Nanoparticles consisting of different biocompatible materials are attracting a lot of interest in the biomedical area as useful tools for drug delivery, photo-therapy and contrast enhancement agent ...

Structural and magnetic properties of multi-core nanoparticles analysed using a generalised numerical inversion method

The structural and magnetic properties of magnetic multi-core particles were determined by numerical inversion of small angle scattering and isothermal magnetisation data. The investigated particles consist of iron oxide nanoparticle cores (9 nm) embedded in poly(styrene) spheres (160 nm). A thorough physical characterisation of the particles included transmission electron microscopy, X-ray diffraction and asymmetrical flow field-flow fractionation. Their structure was ultimately disclosed by an indirect Fourier transform of static light scattering, small angle X-ray scattering and small angle neutron scattering data of the colloidal dispersion. The extracted pair distance distribution functions clearly indicated that the cores were mostly accumulated in the outer surface layers of the poly(styrene) spheres. To investigate the magnetic properties, the isothermal magnetisation curves of the multi-core particles (immobilised and dispersed in water) were analysed. The study stands out by applying the same numerical approach to extract the apparent moment distributions of the particles as for the indirect Fourier transform. It could be shown that the main peak of the apparent moment distributions correlated to the expected intrinsic moment distribution of the cores. Additional peaks were observed which signaled deviations of the isothermal magnetisation behavior from the non-interacting case, indicating weak dipolar interactions.

Compacted nanoscale sensors by merging ZnO nanorods with interdigitated electrodes

ZnO nanorods (NRs) sensors utilizing hybrid or monolithic integration of the NRs on nanoscale or microscale interdigitated electrodes (IDEs) were fabricated and characterized. The IDEs with their finger electrode width ranging from 50 nm to 3 μm were formed on SiO2/Si substrates by nanoimprint lithography or conventional photolithography and metallization techniques, whereas the ZnO NRs were grown by chemical synthesis method. The average diameter of the ZnO NRs is about 100 nm, and their length can be varied from 2 to 5 μm by controlling growth time. When sensing targets, such as molecules or nanoparticles, bind onto the ZnO NRs, the conductance between IDEs will change. As probing test, II-VI quantum dots (QDs) were attached on the ZnO NRs, and clear responses were obtained by measuring and comparing current-voltage (I-V) characteristic of the sensor before and after binding the QDs.