Achala de Mel

Biofunctionalization of Biomaterials for Accelerated in Situ Endothelialization: A Review

The higher patency rates of cardiovascular implants, including vascular bypass grafts, stents, and heart valves are related to their ability to inhibit thrombosis, intimal hyperplasia, and calcification. In native tissue, the endothelium plays a major role in inhibiting these processes. Various bioengineering research strategies thereby aspire to induce endothelialization of graft surfaces either prior to implantation or by accelerating in situ graft endothelialization. This article reviews potential bioresponsive molecular components that can be incorporated into (and/or released from) biomaterial surfaces to obtain accelerated in situ endothelialization of vascular grafts. These molecules could promote in situ endothelialization by the mobilization of endothelial progenitor cells (EPC) from the bone marrow, encouraging cell-specific adhesion (endothelial cells (EC) and/or EPC) to the graft and, once attached, by controlling the proliferation and differentiation of these cells. EC and EPC interactions with the extracellular matrix continue to be a principal source of inspiration for material biofunctionalization, and therefore, the latest developments in understanding these interactions will be discussed.

Nitric oxide: a guardian for vascular grafts?

Nitric Oxide: A Guardian for Vascular Grafts? Achala de Mel, Ferid Murad, and Alexander M. Seifalian* Centre for Nanotechnology & Regenerative Medicine, Division of Surgery & Interventional Science, and London Centre for Nanotechnology (LCN), University College London, London, United Kingdom. Institute of Molecular and Cellular Signaling, Department of Biochemistry and Molecular biology, George Washington University, Washington D.C. Royal Free Hampstead NHS Trust Hospital, London, United Kingdom

Nitric Oxide Donors for Cardiovascular Implant Applications

In an era of increased cardiovascular disease burden in the ageing population, there is great demand for devices that come in to contact with the blood such as heart valves, stents, and bypass grafts that offer life saving treatments. Nitric oxide (NO) elution from healthy endothelial tissue that lines the vessels maintains haemostasis throughout the vasculature. Surgical devices that release NO are desirable treatment options and N-diazeniumdiolates and S-nitrosothiols are recognized as preferred donor molecules. There is a keen interest to investigate newer methods by which NO donors can be retained within biomaterials so that their release and kinetic profiles can be optimized. A range of polymeric scaffolds incorporating microparticles and nanomaterials are presenting solutions to current challenges, and have been investigated in a range of clinical applications. This review outlines the application of NO donors for cardiovascular therapy using biomaterials that release NO locally to prevent thrombosis and intimal hyperplasia (IH) and enhance endothelialization in the fabrication of next generation cardiovascular device technology.

Cardiovascular application of polyhedral oligomeric silsesquioxane nanomaterials: a glimpse into prospective horizons

Revolutionary advances in nanotechnology propose novel materials with superior properties for biomedical application. One of the most promising nanomaterials for biomedical application is polyhedral oligomeric silsesquioxane (POSS), an amazing nanocage consisting of an inner inorganic framework of silicon and oxygen atoms and an outer shell of organic groups. The unique properties of this nanoparticle has led to the development of a wide range of nanostructured copolymers with significantly enhanced properties including improved mechanical, chemical, and physical characteristics. Since POSS nanomaterials are highly biocompatible, biomedical application of POSS nanostructures has been intensely explored. One of the most promising areas of application of POSS nanomaterials is the development of cardiovascular implants. The incorporation of POSS into biocompatible polymers has resulted in advanced nanocomposite materials with improved hemocompatibility, antithrombogenicity, enhanced mechanical and surface properties, calcification resistance, and reduced inflammatory response, which make these materials the material of choice for cardiovascular implants. These highly versatile POSS derivatives have opened new horizons to the field of cardiovascular implant. Currently, application of POSS containing polymers in the development of new generation cardiovascular implants including heart valve prostheses, bypass grafts, and coronary stents is under intensive investigation, with encouraging outcomes.

Surface Modification of Biomaterials: A Quest for Blood Compatibility

Cardiovascular implants must resist thrombosis and intimal hyperplasia to maintain patency. These implants when in contact with blood face a challenge to oppose the natural coagulation process that becomes activated. Surface protein adsorption and their relevant 3D confirmation greatly determine the degree of blood compatibility. A great deal of research efforts are attributed towards realising such a surface, which comprise of a range of methods on surface modification. Surface modification methods can be broadly categorized as physicochemical modifications and biological modifications. These modifications aim to modulate platelet responses directly through modulation of thrombogenic proteins or by inducing antithrombogenic biomolecules that can be biofunctionalised onto surfaces or through inducing an active endothelium. Nanotechnology is recognising a great role in such surface modification of cardiovascular implants through biofunctionalisation of polymers and peptides in nanocomposites and through nanofabrication of polymers which will pave the way for finding a closer blood match through haemostasis when developing cardiovascular implants with a greater degree of patency.

Inception to actualization: Next generation coronary stent coatings incorporating nanotechnology

Percutaneous coronary intervention (PCI) is used to treat blocked coronary arteries. Bare-metal stents (BMS) were first used in PCI but often necessitated repair procedures due to in-stent restenosis. Drug-eluting stents (DES) were developed to address this problem as the stent-incorporated anti-proliferative drugs prevented restenosis. However late-stent thrombosis arose with the use of DES due to polymer hypersensitivity and impaired re-endothelialization. Evidence suggests that using a combination of biofunctionalized polymers and antibody/peptide motifs can prevent thrombosis while ensuring in situ endothelialization. The advent of nanotechnology has engendered techniques like layer-by-layer self-assembly, and localized drug and gene delivery using nanoparticles. Therefore, this review seeks to explore the convergence of biotechnology and nanotechnology for the next generation coronary stent coatings, with an emphasis on its development from bench to beside.

Development of cardiovascular bypass grafts: endothelialization and applications of nanotechnology

There is a critical clinical need for small-diameter bypass grafts, with applications involved in the coronary artery and lower limb. Commercially available materials give rise to unfavorable responses when in contact with blood and subjected to low-flow hemodynamics and, thus, are nonideal as small-diameter bypass grafts. Optimizing the mechanical properties to match both the native artery and the graft surfaces has received keen attention. Endothelialization of bypass grafts is considered a protective mechanism where the biochemicals produced from endothelial cells exert a range of favorable responses, including antithrombotic, noninflammatory responses and inhibition of intimal hyperplasia. In situ endothelialization is most desirable. Nanotechnology approaches facilitate all aspects of endothelialization, including endothelial progenitor cell mobilization, migration, adhesion, proliferation and differentiation. ‘Surface nanoarchitecturing mechanisms’, which mimic the natural extracellular matrix to optimize endothelial progenitor cell interaction and controlled delivery of various factors in the form of nanoparticles, which can be combined with gene therapy, are of keen interest. This article discusses the development of bypass grafts, focusing on the optimization of the biological properties of mechanically suitable grafts.

A silver nanocomposite biomaterial for blood‐contacting implants

Cardiovascular implants must resist infection and thrombosis. A nanocomposite polymeric material [polyhedral-oligomeric-silsesquioxane-poly(carbonate-urea)urethane; POSS-PCU] demonstrates ideal properties for cardiovascular applications. Silver nanoparticles or nanosilver (NS) are recognized for efficient antibacterial properties. This study aims to determine the influence of NS integrated POSS-PCU on thrombogenicity. Silver nitrate was reduced with dimethylformamide and stabilized by the inclusion of fumed silica nanoparticles to prevent aggregation of NS and were incorporated into POSS-PCU to form a range of POSS-PCU-NS concentrations (by weight); 0.20% (NS16), 0.40% (NS32), 0.75% (NS64), and 1.50% (NS128). Surface wettability was determined with sessile-drop water contact angles. Platelets were introduced onto test samples and Alamar Blue (AB), mitochondrial-activity assay, quantified the degree of platelet adhesion whilst platelet-factor-4 (PF4) ELISA quantified the degree of platelet activation. Thromboelastography (TEG) determined the profiles of whole blood kinetics while hemolysis assay demonstrated the degree of blood compatibility. Increasing levels of NS induced greater hydrophilicity. A concentration dependant decrease in platelet adhesion and activation was observed with AB and PF4 readings, respectively. TEG demonstrated that the antithrombogenic properties of POSS-PCU were retained with POSS-PCU-NS16, and enhanced with POSS-PCU-NS32, but was reduced with POSS-PCU-NS64 and POSS-PCU-NS128. POSS-PCU-NS64 and POSS-PCU-NS128 demonstrated a hemolytic tendency, but no hemolysis was observed with POSS-PCU-NS16 and POSS-PCU-NS32. Overall, POSS-PCU-NS32 rendered potent antithrombogenic properties.

Surface modification of a polyhedral oligomeric silsesquioxane poly(carbonate-urea) urethane (POSS-PCU) nanocomposite polymer as a stent coating for enhanced capture of endothelial progenitor cells

An unmet need exists for the development of next-generation multifunctional nanocomposite materials for biomedical applications, particularly in the field of cardiovascular regenerative biology. Herein, we describe the preparation and characterization of a novel polyhedral oligomeric silsesquioxane poly(carbonate-urea) urethane (POSS-PCU) nanocomposite polymer with covalently attached anti-CD34 antibodies to enhance capture of circulating endothelial progenitor cells (EPC). This material may be used as a new coating for bare metal stents used after balloon angioplasty to improve re-endothelialization. Biophysical characterization techniques were used to assess POSS-PCU and its subsequent functionalization with anti-CD34 antibodies. Results indicated successful covalent attachment of anti-CD34 antibodies on the surface of POSS-PCU leading to an increased propensity for EPC capture, whilst maintaining in vitro biocompatibility and hemocompatibility. POSS-PCU has already been used in 3 first-in-man studies, as a bypass graft, lacrimal duct and a bioartificial trachea. We therefore postulate that its superior biocompatibility and unique biophysical properties would render it an ideal candidate for coating medical devices, with stents as a prime example. Taken together, anti-CD34 functionalized POSS-PCU could form the basis of a nano-inspired polymer platform for the next generation stent coatings.

In vivo study of a model tissue-engineered small-diameter vascular bypass graft

Conventionally used vascular grafts such as polyester (Dacron) or expanded polytetrafluoroethylene perform inadequately as small‐diameter vascular bypass grafts (SDBGs). SDBGs, which can maintain long‐term patency and those that could potentially evolve with the somatic growth, are highly desirable in vascular surgery and thus research into tissue‐engineered blood vessels (TEBVs) is of keen interest. A TEBV was developed by seeding endothelial cells onto a collagen matrix that was cross‐linked and contracted by smooth muscle cells (SMCs). A polyester graft served as a scaffold. Recovery studies (12 TEBVs and seven controls) were carried out to assess in vivo endothelialization and long‐term patency of TEBVs. Hemodynamic observations indicated para‐anastomotic turbulences and high shear stress at anastomosis. Recovery studies demonstrated confluent endothelialization, thrombus‐free surfaces, and patent TEBVs in all cases. Graft incorporation and neovascularization of the scaffold occurred in both hybrid and control grafts. However, thickened neointima formation occurred in TEBV grafts, which was most likely caused by the rigidity of polyester scaffold. Significant perigraft inflammatory changes could be observed in both TEBVs and control grafts at 1, 4, and 8 weeks. In conclusion, the TEBVs demonstrated satisfactory performance as an infra–renal–aortic graft in a porcine model. The TEBV serves as a promising model and facilitates the development of a TEBV in a clinical setting, potentially with human stem cells and with more biocompatible, biodegradable scaffolds that are mechanically more compliant with natural vessels.