Ad Steer

Beyond point measurements: sea ice floes characterized in 3-D

A new methodology for coincident floe-scale measurements of the surface elevation, snow depth, and ice draft (the thickness below the water line) of Antarctic sea ice has been demonstrated during two recent research voyages: the Australian-led Sea Ice Physics and Ecosystem Experiment II (SIPEX II) to East Antarctica in September–November 2012 and the United Kingdom–led Ice Mass Balance in the Bellingshausen Sea (ICEBell) voyage to the Weddell and Bellingshausen Seas in November 2010

Comparing methods of measuring sea-ice density in the East Antarctic

Abstract Remotely sensed derivation of sea-ice thickness requires sea·ice density. Sea-ice density was estimated with three techniques during the second Sea Ice Physics and Ecosystem eXperimett (SIPEX-II, September-November 2012, East Antarctica). The sea ice was first-year highly deformed, mean thicknsss 1.2 m with layers, consistent with rafting, and 6-7/10 columnar ice and 3/10 granular ice. Ice density was found to be lower than values (900-920 kg m−3 used previously to derive ice thickness,, with columnar ice mean density of 870 kg m− 3. At two different ice stations the mean density of the ice was 800 kg m–3, the lower density reflecting a high percentage of porous granular ice at the second station. Error estimates for mass/volume and liquid/solid water methods are presented. With 0.1 m long, 0.1 m core samples, the error on individual density estimates is 28 kg m-3. Errors are larger for smaller machined blocks. Errors increase to 46 kg m-3 if the liquid/solid volume method is used. The mass/vouume method has a low bias due to brine drainage of at least 5%. Bulk densities estimated from ice and snow measurements along 100 m transects were high, and likely unrealistic as the assumption of isostatcc balance is not suitable over these length scales in deformed ice.