Adebowale O. Adejumo

Exploration of solar radiation data from three geo-political zones in Nigeria

In this paper, readings of solar radiation received at three meteorological sites in Nigeria were analysed. Analysis of Variance (ANOVA) statistical test was carried out on the data set to observe the significant differences on radiations for each quarter of the specified years. The data were obtained in raw form from Nigerian Meteorological Agency (NIMET), Oshodi, Lagos. In order to get a clear description and visualization of the fluctuations of the radiation data, each year were considered independently, where it was discovered that for the 3rd quarter of each year, there is a great fall in the intensity of the solar radiation to as low as 73.27 (W/m2), 101.66 (W/m2), 158.51 (W/m2) for Ibadan, Port-Harcourt and Sokoto respectively. A detailed data description is available for the averages across months for each quarter. The data can provide insights on the health implications of exposure to solar radiation and the effect of solar radiation on climate change, food production, rainfall and flood patterns.

Breast cancer patients in Nigeria: Data exploration approach

Breast cancer is the type of cancer that develops from breast tissue; it is mostly common in women and it is one of the most studied diseases, largely because of its high mortality (second to lung cancer). However, it occurs in males also. This article presents a statistical study of the distribution of age, gender, length of stay, mode of diagnosis, status (dead or alive) after treatment and the location of breast cancer among 300 patients admitted in the University of Ilorin teaching hospital, Ilorin, Nigeria. The study covers a period of five (5) years; from 2011 to 2016 and logistic regression was used to perform the basic analysis in this study. It was discovered that the age of patients and the location of the breast cancer (right or left) contributes significantly to the survival of the patients. However, early detection and treatment of the disease is highly encouraged. This study also recommends that awareness should be taken to the grassroots and males should not be excluded from this discussion.

Performance rating of the transmuted exponential distribution: an analytical approach

In this article, the so called Transmuted Exponential (TE) distribution was applied to two real life datasets to assess its potential flexibility over some other generalized models. Various statistical properties of the TE distribution were also identified while the method of maximum likelihood estimation was used to estimate the model parameters.

A Study of Probability Models in Monitoring Environmental Pollution in Nigeria

In Lagos State, Nigeria, pollutant emissions were monitored across the state to detect any significant change which may cause harm to human health and the environment at large. In this research, three theoretical distributions, Weibull, lognormal, and gamma distributions, were examined on the carbon monoxide observations to determine the best fit. The characteristics of the pollutant observation were established and the probabilities of exceeding the Lagos State Environmental Protection Agency (LASEPA) and the Federal Environmental Protection Agency (FEPA) acceptable limits have been successfully predicted. Increase in the use of vehicles and increase in the establishment of industries have been found not to contribute significantly to the high level of carbon monoxide concentration in Lagos State for the period studied.

Data analysis on physical and mechanical properties of cassava pellets

In this data article, laboratory experimental investigation results carried out at National Centre for Agricultural Mechanization (NCAM) on moisture content, machine speed, die diameter of the rig, and the outputs (hardness, durability, bulk density, and unit density of the pellets) at different levels of cassava pellets were observed. Analysis of variance using randomized complete block design with factorial was used to perform analysis for each of the outputs: hardness, durability, bulk density, and unit density of the pellets. A clear description on each of these outputs was considered separately using tables and figures. It was observed that for all the output with the exception of unit density, their main factor effects as well as two and three ways interactions is significant at 5% level. This means that the hardness, bulk density and durability of cassava pellets respectively depend on the moisture content of the cassava dough, the machine speed, the die diameter of the extrusion rig and the combinations of these factors in pairs as well as the three altogether. Higher machine speeds produced more quality pellets at lower die diameters while lower machine speed is recommended for higher die diameter. Also the unit density depends on die diameter and the three-way interaction only. Unit density of cassava pellets is neither affected by machine parameters nor moisture content of the cassava dough. Moisture content of cassava dough, speed of the machine and die diameter of the extrusion rig are significant factors to be considered in pelletizing cassava to produce pellets. Increase in moisture content of cassava dough increase the quality of cassava pellets.

Quantitative exploration of factors influencing psychotic disorder ailments in Nigeria

In this data article, records on demographic data, family problem issues, as well as results of medical tests from five major classes of psychotic disorder namely: bipolar; vascular dementia, minimal brain dysfunction; insomnia; and schizophrenia, were collected on 500 psychotic patients carefully selected from the pool of medical records of Yaba Psychiatric Hospital, Lagos, Nigeria, for the period of 5 years, between January 2010 and December 2014, were examined. X-squared Statistic was used to examine each of psychotic disorders to identify demographic (age, gender, religion, marital status, and occupation) and family issues (loss of parent, history of such ailment in the family (family status), divorce, head injury, and heredity of such ailment (genetic) factors that influence them. A clear description on each of these psychotic disorders (bipolar; vascular dementia, minimal brain dysfunction (MBD), insomnia and Schizophrenia) was considered separately using tables and bar diagrams. Data analysis results are as follows: firstly, 40.2%, of the 500 psychotic patients tested positive to bipolar, 40.6% to insomnia, 75.0% to schizophrenia, 43.6% to MBD and 69.2% to vascular dementia. Secondly, female patients were more prone to all the psychotic indicators than their male counterpart except in MBD. Thirdly, the oldest age group (> 60 years) is more prone to bipolar and insomnia ailments, while the mid age group (30 – 60 years) is prone to schizophrenia and vascular dementia, and the youngest group (< 30 years) is prone to MBD. Lastly, the factors that influence the ailments are listed: bipolar (age, occupation, marital status, divorce, and spiritual consultation); insomnia (age, occupation, marital status, divorce, and spiritual consultation); schizophrenia (age, occupation, religion, marital status, hereditary, and divorce); MBD (gender, age, occupation, and marital status); and vascular dementia (history of the ailment and spiritual consultation). Bipolar and insomnia are influenced by the same set of factors, which implies that any patient having one is most likely to be at risk of having the other.

Drying kinetic of industrial cassava flour: Experimental data in view

In this data article, laboratory experimental investigation results on drying kinetic properties: the drying temperature (T), drying air velocity (V) and dewatering time (Te), each of the factors has five levels, and the experiment was replicated three times and the output: drying rate and drying time obtained, were observed. The experiment was conducted at National Centre for Agricultural Mechanization (NCAM) for a period of eight months, in 2014. Analysis of variance was carried out using randomized complete block design with factorial experiment on each of the outputs: drying rate and drying times of the industrial cassava flour. A clear picture on each of these outputs was provided separately using tables and figures. It was observed that all the main factors as well as two and three ways interactions are significant at 5% level for both drying time and rate. This also implies that the rate of drying grated unfermented cassava mash, to produce industrial cassava flour, depend on the dewatering time (the initial moisture content), temperature of drying, velocity of drying air as well as the combinations of these factors altogether. It was also discovered that all the levels of each of these factors are significantly difference from one another. In summary, the time of drying is a function of the dewatering time which was responsible for the initial moisture content. The higher the initial moisture content the longer the time of drying, and the lower the initial moisture content, the lower the time of drying. Also, the higher the temperature of drying the shorter the time of drying and vice versa. Also, the air velocity effect on the drying process was significant. As velocity increases, rate of drying also increases and vice versa. Finally, it can be deduced that the drying kinetics are influenced by these processing factors.

A New Generalization of the Lomax Distribution with Increasing, Decreasing, and Constant Failure Rate

Developing new compound distributions which are more flexible than the existing distributions have become the new trend in distribution theory. In this present study, the Lomax distribution was extended using the Gompertz family of distribution, its resulting densities and statistical properties were carefully derived, and the method of maximum likelihood estimation was proposed in estimating the model parameters. A simulation study to assess the performance of the parameters of Gompertz Lomax distribution was provided and an application to real life data was provided to assess the potentials of the newly derived distribution. Excerpt from the analysis indicates that the Gompertz Lomax distribution performed better than the Beta Lomax distribution, Weibull Lomax distribution, and Kumaraswamy Lomax distribution.

Quantitative evaluation of pregnant women delivery status’ records in Akure, Nigeria

In this data article, monthly records (datasets) of total delivery, normal delivery, delivery through Caesarean section and number of still births from pregnant women in Akure, the capital city of Ondo state Nigeria, for a period of ten years, between January 2007 and December 2016 were considered. Correlational and time series analyses were conducted on the monthly records of total delivery, normal delivery (delivery through woman virginal), delivery through Caesarean section, and number of still births, in order to observe the patterns each of these indicators follows and to recommend appropriate model for forecasting their future values. The data were obtained in raw form from State Specialist Hospital (SSH), Akure, Ondo state, Nigeria. A clear description and variation in each of these indicators (total delivery, normal delivery, caesarean section, and still births) were considered separately using descriptive statistics and box plots. Different models were also proposed for each of these indicators using time series models.

The Gompertz Inverse Exponential (GoIE) distribution with applications

Abstract The Gompertz inverse exponential (GoIE) distribution using the Gompertz generalized family of distributions was derived and introduced in this article. Some basic statistical properties of the model were derived and discussed in minute details. The model parameters were estimated using the maximum likelihood estimation method. Real-life applications were provided and the GoIE distribution provides better fits than the Gompertz exponential, Gompertz Weibull and Gompertz Lomax distributions.