Agne Swerin

Toward Superhydrophobic Polydimethylsiloxane−Silica Particle Coatings

Hydrophobized silica nanoparticles of different sizes, from 16 to 500 nm, were used to impart roughness to a hydrophobic polydimethylsiloxane (PDMS) coating with the aim of obtaining superhydrophobic properties. The particle silanization process and the curing process of the PDMS coating were optimized to increase the contact angle (CA) of the particle containing coating. The evaluation of the coatings, by means of water CA measurements and scanning electron microscopy imaging, shows that superhydrophobicity in the adhesive rose state was achieved using combinations of two differently sized particles, with an excess of the small 16 nm ones. Superhydrophobicity in the lotus state was obtained when the filler concentration of 16 nm particles was 40 wt%, but under such conditions the coating was found to partially crack, which is detrimental in barrier applications. The preference for the rose wetting state can be explained by the round shape of the particles, which promotes the superhydrophobic rose wetting state over that of the superhydrophobic lotus state. GRAPHICAL ABSTRACT

Measurements and dimensional scaling of spontaneous imbibition of inkjet droplets on paper

We investigate theoretically and experimentally the spontaneous imbibition of water based inkjet formulations utilizing paper capillary rise and imbibition of inkjet drops. We approximate the paper ...