Ahed Al-Wahadni

Satisfaction with dental implants: a literature review.

Recent years have witnessed a consistent trend toward the introduction of patient assessment of different treatment outcomes in dental practice. Patient satisfaction with dental implants was considered among these treatment modalities. Few literature reviews have been published on this topic. This article critically analyzes the concerned topics related to patient satisfaction with dental implant. A MEDLINE search was completed from 1983 to 2004, along with a manual search, to locate related articles on the topic. Dental implants provided promising and predictable results regarding patient satisfaction and various aspects of life assessment.

Fracture resistance of teeth restored with different post systems: in vitro study

OBJECTIVES The objective of this study was to investigate fracture resistance and mode of failure of teeth restored with different prefabricated post systems. STUDY DESIGN Thirty teeth were collected, sectioned 15 mm from the apex, root canal prepared, and randomly allocated into 3 groups as follows: glass fiber posts (group 1), carbon fiber posts (group 2), and Radix-Anchor titanium posts (group 3). Teeth were then restored with a composite core and tested using a universal testing machine at 10 mm/min cross-head speed. Mode of failure was identified as either reparable or irreparable (catastrophic). RESULTS Mean values of fracture forces (N) for teeth restored with Radix posts (571.6) were statistically significantly higher than teeth restored with either carbon fiber (420.6) or glass fiber posts (393.9). There were 86.67% of fractures that were catastrophic in nature. CONCLUSIONS Teeth restored with Radix-titanium posts were more resistant to fracture than those restored with either carbon or glass fiber posts. Most of the fracture modes were catastrophic in nature.

Oral Disease Status of a Sample of Jordanian People Ages 10 to 28 With Cleft Lip and Palate

Objective To determine the levels of periodontal disease and dental caries in subjects with cleft lip and palate and to compare them with matched noncleft control subjects. Design A total of 32 subjects with cleft lip and palate, ages 10 to 28 years, and a similar number of noncleft control subjects were examined for plaque biofilm deposits, gingivitis, periodontitis, and dental caries by using the Silness and Löe plaque index (PI), Löe and Silness gingival index (GI), probing pocket depth (PPD), and the decayed-missing-filled-teeth (DMFT) index, respectively. Setting Faculty of Dentistry, Jordan University of Science and Technology, and Prince Rashed Hospital, Royal Medical Services, northern Jordan. Results Scores for PI, GI, PPD, and DMFT were significantly higher in subjects with cleft lip and palate than in control subjects. Conclusion Subjects with cleft lip and palate are at an increased risk for dental caries and periodontal disease when compared with a noncleft population.

Correction of facial and mandibular asymmetry using a computer aided design/computer aided manufacturing prefabricated titanium implant.

AbstractPatients with significant craniofacial asymmetry may have functional problems associated with their occlusion and aesthetic concerns related to the imbalance in soft and hard tissue profiles. This report details a case of facial asymmetry secondary to left mandible angle deficiency due to undergoing previous radiotherapy. We describe the correction of the bony deformity using computer aided design/computer aided manufacturing custom-made titanium onlay using novel direct metal laser sintering. The direct metal laser sintering onlay proved a very accurate operative fit and showed a good aesthetic correction of the bony defect with no reported complications postoperatively. It is a useful low-morbidity technique, and there is no resorption or associated donor-site complications.

Factors affecting the shear bond strength of metal and ceramic brackets bonded to different ceramic surfaces

The aims of this study were to evaluate the shear bond strength (SBS) of metal and ceramic brackets bonded to two different all-ceramic crowns, IPS Empress 2 and In-Ceram Alumina, to compare the SBS between hydrofluoric acid (HFA), phosphoric acid etched, and sandblasted, non-etched all-ceramic surfaces. Ninety-six all-ceramic crowns were fabricated resembling a maxillary left first premolar. The crowns were divided into eight groups: (1) metal brackets bonded to sandblasted 9.6 per cent HFA-etched IPS Empress 2 crowns; (2) metal brackets bonded to sandblasted 9.6 per cent HFA-etched In-Ceram crowns; (3) ceramic brackets bonded to sandblasted 9.6 per cent HFA-etched IPS Empress 2 crowns; (4) ceramic brackets bonded to sandblasted 9.6 per cent HFA-etched In-Ceram crowns; (5) metal brackets bonded to sandblasted 37 per cent phosphoric acid-etched IPS Empress 2 crowns; (6) metal brackets bonded to sandblasted 37 per cent phosphoric acid-etched In-Ceram crowns; (7) metal brackets bonded to sandblasted, non-etched IPS Empress 2 crowns; and (8) metal brackets bonded to sandblasted, non-etched In-Ceram crowns. Metal and ceramic orthodontic brackets were bonded using a conventional light polymerizing adhesive resin. An Instron universal testing machine was used to determine the SBS at a crosshead speed of 0.1 mm/minute. Comparison between groups was performed using a univariate general linear model and chi-squared tests. The highest mean SBS was found in group 3 (120.15 +/- 45.05 N) and the lowest in group 8 (57.86 +/- 26.20 N). Of all the variables studied, surface treatment was the only factor that significantly affected SBS (P < 0.001). Acid etch application to sandblasted surfaces significantly increased the SBS in groups 1, 2, 5, and 6. The SBS of metal brackets debonded from groups 1, 3, and 5 were not significantly different from those of groups 2, 4, and 6. All debonded metal brackets revealed a similar pattern of bond failure at the adhesive-restorative interface. However, ceramic brackets had a significantly different adhesive failure pattern with dominant failure at the adhesive-bracket interface. Ceramic fractures after bracket removal were found more often in groups 1-4. No significant difference in ceramic fracture was observed between the IPS Empress 2 and In-Ceram groups.

Improved Construction of Auricular Prosthesis by Digital Technologies.

Abstract Implant-retained auricular prostheses are a successful prosthetic treatment option for patients who are missing their ear(s) due to trauma, oncology, or birth defects. The prosthetic ear is aesthetically pleasing, composed of natural looking anatomical contours, shape, and texture along with good color that blends with surrounding existing skin. These outcomes can be optimized by the integration of digital technologies in the construction process. This report describes a sequential process of reconstructing a missing left ear by digital technologies. Two implants were planned for placement in the left mastoid region utilizing specialist biomedical software (Materialise, Belgium). The implant positions were determined underneath the thickest portion (of anti-helix area) left ear that is virtually simulated by means of mirror imaging of the right ear. A surgical stent recording the implant positions was constructed and used in implant fixtures placement. Implants were left for eight weeks, after which they were loaded with abutments and an irreversible silicone impression was taken to record their positions. The right existing ear was virtually segmented using the patient CT scan and then mirror imaged to produce a left ear, which was then printed using 3D printer (Z Corp, USA). The left ear was then duplicated in wax which was fitted over the defect side. Then, it was conventionally flasked. Skin color was digitalized using spectromatch skin color system (London, UK). The resultant silicone color was mixed as prescribed and then packed into the mold. The silicone was cured conventionally. Ear was trimmed and fitted and there was no need for any extrinsic coloring. The prosthetic ear was an exact match to the existing right ear in shape, skin color, and orientation due to the great advantages of technologies employed. Additionally, these technologies saved time and provided a base for reproducible results regardless of operator.

Veneered Zirconia-Based Restorations Fracture Resistance Analysis

PURPOSE To examine the effects of the veneering technique on the fracture resistance of zirconia-based crowns. MATERIALS AND METHODS An artificial tooth was prepared with a 1.2 mm heavy chamfer finish line and 8° taper. The prepared tooth was scanned using CAD/CAM technology to fabricate 45 cobalt chromium (CoCr) testing dies. One CoCr die was scanned, and 45 zirconia copings were milled and divided according to the veneering technique into three groups of 15 specimens each: layering veneering (LV) using Vita Vm9, overpressing veneering (OV) using Vita Pm9, and digital veneering (DV) using Vita Triluxe forte. The crowns were cemented onto the testing dies using glass ionomer cement. The specimens were thermocycled (3000 cycles, 5° to 55°) then statically loaded (3.7 mm ball, 0.5 mm/min crosshead speed) until failure. Failed crowns were inspected using a magnifier, and failure patterns were identified. One-way ANOVA and multiple comparison Bonferroni tests were applied for statistical analysis of the results. RESULTS Means and standard deviations of failure loads were 1200 ± 306 N for the LV group, 857 ± 188 N for the OV group, and 638 ± 194 N for the DV group. The differences in failure loads were statistically significant between all groups (p < 0.05). Failure mode was predominantly cohesive for LV and OV groups, whereas it was predominantly adhesive for the DV group. CONCLUSIONS The LV group was superior to other groups in terms of fracture resistance, while the DV group was inferior to the other groups in the same aspect.

An In Vitro Investigation of Veneered Zirconia-Based Restorations Shade Reproducibility

PURPOSE To examine the effects of the veneering technique on the shade reproducibility of zirconia-based crowns. MATERIALS AND METHODS An artificial tooth was prepared with a 1.2 mm heavy chamfer finish line and 8° taper. The prepared tooth was scanned using CAD/CAM technology to fabricate 45 cobalt chromium (CoCr) testing dies. One CoCr die was scanned, and 45 zirconia copings were milled and devided according to the veneering technique into 3 groups of 15 specimens each: layering veneering (LV) using Vita Vm9, overpressing veneering (OV) using Vita Pm9, and digital veneering (DV) using Vita Triluxe forte. All veneering layers had the same shade (A2). The specimens were cemented onto the testing dies using glass inomer cement. A spectrophotometer was used to measure the shade coordinates (L, C, h, a, b) for a Vita A2 shade tab and for each specimen. Both the CIE Lab (ΔEab ) and the CIE DE2000 (ΔE00 ) color difference formulas were applied to compare the shade tab and the study groups. One-way ANOVA and multiple comparison Bonferroni tests were applied for statistical analysis of the results. RESULTS Means and standard deviations (SDs) of ΔEab were 2.3 ± 1.3 for LV, 3.5 ± 0.8 for OV, and 4.0 ± 0.7 for DV. Means and SDs of ΔE00 were 1.4 ± 0.8 for LV, 2.1 ± 0.5 for OV, and 3.1 ± 0.4 for DV. ΔEab of LV group was significantly lower (p < 0.05) than both OV and DV groups, whereas the difference in ΔEab between OV and DV groups was not significant (p = 0.39). The differences in ΔE00 between all groups were significant (p < 0.05). CONCLUSIONS LV group was superior to other groups in terms of shade reproducibility. The ΔEab and the ΔE00 values of LV and OV groups were within clinically acceptable ranges; however, the ΔEab and the ΔE00 values of group DV were beyond the clinically acceptable ranges. The ΔE00 formula demonstrated a statistically significant difference between OV and the DV groups, while the ΔEab formula did not. The zirconia veneering technique had a significant influence on the shade reproducibility of zirconia-based crowns.